Renegade

5280 G2 ATV Rear Differential Seal Kit
$30.00
Rear Differential Seal kit for differentials with 80mm outer diameter pinion seal
1 Pinion Seal, 80mm
2 Axle Seals, 52mm
Brands we use include : Timken, Dichtomatik and SKF
Fits:
2013 to Current Outlander 1000/1000R XMR
2015 to Current Outlander 800/850 Xmr
2016 to Current Renegade 1000R XMR
2019 to Current 650 and Larger ATVs
Also some 2019 to Current 570 XMR (measure your parts to verify fitment)
*** THIS WILL NOT WORK IN 2013-2018 650/570 XMR or 2011/2012 800 XMR machines. If you are unsure about fitment please contact us! ***
Add to cart Details
5280 Rear Differential Bearing and Seal Kit
$260.00
5280 Rear Differential Tapered Roller Bearings and Seal kit 1 Pinion Seal, 80mm outer diameter 2 Axle Seals, 52mm outer diameter 1 Thick Tapered Roller Bearing 3 Thin Tapered Roller Bearing 1 Needle Bearing These are High Quality aftermarket parts, as good or better than OEM! Brands include FAG, NTN, IKO, TIMKEN, KOYO, SKF, Dichtomatik. BRP does not sell these bearings alone, we have taken the guess work out of replacing these parts. Fits: 2019 to Current 650 and Larger ATVs 2013 to Current Outlander 1000/1000R XMR 2015 to Current Outlander 800/850 XMR 2016 to Current Renegade 1000R XMR some 2019 to Current 570 XMR (measure your parts to verify fitment) *** THIS WILL NOT WORK IN 2013-2018 650/570 XMR or 2011/2012 800 XMR machines. If you are unsure about fitment, please contact us! *** Fits differential part numbers: 705502808, 705502546, 705502178, 705502090
Add to cart Details
5280 Rear Differential Spanner Wrench Pinion Nut Tool 1/2 Drive
$45.00
NEW Spanner Wrench This is to remove and install the 705501550 nut on ATVs with the tapered roller bearing rear differentials. Also known as the XMR or 2019+ style rear diffs. Use a 20 spline yoke to retain the assembly in a vice and spin the nut off. The nut should be RH threaded
Add to cart Details
703500865 Secondary Clutch Stud Kit M10x136mm
$9.59
Can-Am 703500865 Secondary Clutch Driven Pulley Stud Nut Screw Kit Secondary Stud/Nut Kit M10x136mm You will need to reuse your washer. This kit will work on every Vtwin ATV factory driven (secondary) clutch (pulley) Also fits Commander driven clutch Will work on non QRS Maverick driven clutch If you have fitment questions, please contact us, we are here to help. Part numbers: 703500865 420441900 420242097 420242402
Add to cart Details
710006134 NEW OEM Start Stop Switch G2
$74.99
Genuine OEM Start/Stop Switch
This has the additional single light blue wire with connector.
Current Part Number: 710006134
Fits some 2019 Outlander and Renegade 1000R, 2020 Outlander and Renegade 850/1000R
Please contact us if you are not 100% sure on fitment, we will be happy to assist
Add to cart Details
OUT OF STOCK

800/850/1000 XMR Ring and Pinion Gear Rebuild Kit With Bearings and Seals
$425.00
SHIPS FREE TO THE LOWER 48 STATES New OEM XMR Rear Differential Gear set, 10/36 Ring and Pinion gear set, Timken, Dichtomatik or SKF seals, NTN or IKO pilot bearing , OEM shim kit and OEM bearings Fits the larger style 800/850/1000/1000R XMR style REAR differential first seen on the 2013 Outlander 1000 XMR. This gear set will not install into 650 xmr and 570 xmr differential cases. Please see our other listings for those. This is a common part to swap on to generation 2 atvs. We do sell complete kits to do so, please check out our other listings. Part number 703500870
Add to cart Details
810985 WINDEROSA 570 TOP END GASKET KIT
$141.95
Vertex-Winderosa 810985 Top End Gasket Kit Fits 2016+ Outlander and Renegade 570
Add to cart Details
840 Top end gasket kit
$189.95
Top End Gasket Kit, 93mm Bore, .018″ MLS Cylinder Head Gasket
Big bore GASKET KIT for 650/800 based engines.
MLS (Muti Layer Steel) Cometic head gaskets and steel base gaskets, OEM paper base gaskets are recommended as the steel base gaskets require the surface to be perfect.
Add to cart Details
Aftermarket ATV Rear axle seal 1652
$8.99
High quality aftermarket Timken or SKF axle oil seal. Fits ATV rear differentials 2015-current, some UTV’s To be 100% sure on fitment, measure your outer diameter on your seal, it should read 52mm This seal has a 30mm inner diameter 52mm outer diamter and is 8mm thick. Replaces OEM 705501556 Order qty two per machine.
Add to cart Details
Aftermarket G2 ATV Front Right Brake Caliper
$74.99
New G2 dual piston front right brake caliper with pads. Fits G2 Renegade and Outlander 2012+ Replaces Part number 705600861
Add to cart Details
AFTERMARKET OIL COOLER REPLACES 420890180
$50.00
NEW AFTERMARKET OIL COOLER VTWIN Fit on the "big block" cases Will come as pictured Part Numbers: 420890180
Add to cart Details
Aftermarket XMR Rear Differential Pinion Seal
$11.49
Replaces 705501557 Pinion seal
found on G2 800 850 1000 1000R XMR rear differentials
38mm Inner Diameter
80mm Outer Diameter
8mm Thick
Brands we use include : Timken, Dichtomatik or SKF
Add to cart Details
ALL BALLS CALIPER REBUILD KIT G2 ATV
$22.44
G2 ATV brake caliper seal kit 21-83170 These fit G2 ATV brake calipers, if you have fitment questions please reach out, we are here to help
Add to cart Details
Aluminum Valve Cover V-twin Set
$50.00
Cast Aluminum Valve cover set with Stainless bolts. Replaces your factory plastic valve covers on any can-am V-twin ATV or UTV 500/570/650/800/850/1000/1000R Replaces OE Numbers: 420610390 420610394 420610393 420610395
Add to cart Details
Aluminum Water Neck Upgrade Kit V-twin
$25.00
Replaces OEM part number 420222691 Upgrade your plastic thermostat housings/water neck on your vtwin 500/570/650/800/850/1000 SOLD AS PAIR These will work in Commanders, Mavericks, Outlanders & Renegades
Add to cart Details
Billet Aluminum G2 ATV Shift Plate Upgrade
$31.00
Fits G2 ATV’s Outlander or Renegade 500 450 570 650 800 850 1000 1000R
Shift Arm Base Upgrade
Replaces OEM 707003054 707000971 707002439
USA made Made from 6061 T6 Aluminum (aircraft grade)
This plate does not require any additional hardware, use a zip tie to retain the wire harness or vent lines running near it.
Add to cart Details
Black Handlebar Wind Deflector
$29.99
New Genuine OEM Part number 715001706 Mounting kit sold separately
Add to cart Details
Black-Yellow Handlebar Wind Deflector
$29.99
New Genuine OEM Mounting kit sold separately Part number 715000525
Add to cart Details