Renegade

  • Features:

    Cable adapter and fasteners constructed of highest quality stainless steel

    Gold anodized aluminum throttle lever can be operated with one finger for safer side hilling

    Safety features include rubber accordion boot (keeps moisture out of cable housing) and safety pin (locks left throttle from unwanted use)

    Kit includes all hardware, allen wrenches and instructions for installation in approximately 20 minutes

     

    Part Number 12-71042
    Brand Number: 007-1011A

  • Brand New Genuine OEM BRP logo sticker 20mm diameter Part number 516006224 replaces 219902677 704904616
  • Set of four Bronco gas shock kit for G2 2012-2018 Outlander 500/570/650/800/800R/850/1000/1000R or Renegade 500/570/800R/850/1000/1000R

    These shocks are the same length on all four corners, you may notice a slight lift, more so on a well used machine.

    *Please note these will not work on the wider 2019+ ATVs.

    Features:
    Bronco gas shocks offer long term consistent performance over stock oil only damped shocks
    10% stiffer springs provide a better ride and higher load capacity
    Works great on the front to better support your snowplow and on the rear when hauling cargo
    Smooth black color blends perfectly on your machine
    Direct bolt-on replacement: pre-installed spring allows for quicker setup

    P/N AU-04340 AU-04440

  • New OEM Blue fuel injector Part Number: 420874402 Will come as pictured
  • New IKO, Koyo or NTN brand needle bearing B98 replaces 705500261 If you are unsure on fitment please reach out to us we will help.
  • New aftermarket switch replaces OEM part numbers: 710008837 710005070 710000791 710004618 703500920 710003062 710002883 710003039 710004041 Fits on: 2006-2019 Outlander and Renegades 500 650 800HO 800R 850 1000 1000R 2020 Outlander 650 STD DPS XT XMR 2020 Outlander 6x6 650 or 1000 2020 Renegade 570 XMR Will not work on 400’s or machines with drive by wire. 3 position headlight switch OFF/Low/High beam Will come as pictured Please look at the plug style on your current switch. The buttons may be arranged differently than the switch you are replacing. We have found this switch will work on DPS or non DPS equipped machines
  • New Air filter made by All Balls Racing. This is an OEM replacement filter for early G1 500 650 800HO Outlander or Renegade Please note this will not fit the 800R ATVs Replaces OEM 707800174
  • All Balls Racing Fuel Pump Assembly Sending Unit Part number 47-1023 24-71023 1009-0138 Fits: 2006-2008 Outlander/Renegade 500 650 800HO Replaces OEM : 703500771
  • New aftermarket 91mm bore piston and cylinder kit with gaskets rings wrist pins and circlips 12.1 compression ratio This is a ready to bolt on kit Fits: 2013+ Maverick, Maverick Sport and Commander 1000R Please note this kit will not fit the ATV 1000R or any 1000 engine due to the compression ratio. No dowel pins included, you will need to transfer these from your engine Replaces OEM Part Numbers: 420623566 420623568 420686094 420685244 420296774 420630195 420216352 420216351 420630210
  • NEW Aftermarket Replacement Throttle Lever Assembly with 4x4 Switch. This fits all G1 Outlanders and Renegades, and G2 models with a throttle cable. Replaces Part Numbers: 707000595 709400186 707000369
  • New aftermarket 91mm bore piston and cylinder kit with gaskets rings wrist pins and circlips 10.3 compression ratio This is a ready to bolt on kit, this will work with 800HO 800R and 650 engines. If you install this on a 650 you will need to have your ecu flashed or a inline tuner installed. No dowel pins included, you will need to transfer these from your engine Replaces OEM Part Numbers: 420296775 420685714 420613586 420296774 420216270 420845106 420630210
  • New Aftermarket 650/800 Crankshaft with Connecting rods and bearings. No core needed, ready to install. Replaces OE parts: 420219665 420217425 420217429 420641640 420641645 420233980 420219745 420219746 This will work with DPS equipped machines.
  • New Aftermarket 1000/1000R Crankshaft with Connecting rods and bearings. No core needed, ready to install. *Will not fit Defender Maverick Sport/Trail* Replaces OE parts: 420219735 420219736 420217556 420217559 420641477 420641475 420233726
  • New aftermarket 91mm bore piston and cylinder kit with gaskets rings wrist pins and circlips 10.5:1 compression ratio This is a ready to bolt on kit Fits: Commander 1000 ATV 1000/1000R Defender HD10 and DH9 Maverick Sport 1000 Please note this kit will not fit the SXS 1000R due to the lower compression ratio. No dowel pins included, you will need to transfer these from your engine Replaces OEM Part Numbers: 420685242 420685248 420623568 420623566 420630210 420245436 420216351 420685244 420296774
  • Differential Vent Tube 8mm diameter Part number 705501584
  • New oem head gasket fits 570 machines, order two per engine Part number: 420630852
  • Aftermarket Fuel pump kit with pickup sock lines and seal Part number 1009-0090 Works with:  2016+ Defenders HD5 HD8 HD10 Outlander 450/570 and Renegade 570 Replaces the pump in sending units part numbers 709000461 and 709000662
  • SHIPS FREE TO THE LOWER 48 STATES New Can Am Maverick or Commander Gear Box New Can-Am GEAR BOX this is the way to reduce the over all gear ratio on your can-am 1000 running larger tires. Current Part Number- 420686654 Replaces: 420686563, 420686562 & 420685807 NEW OEM Canam Part NOT A REBUILD, ALL NEW Brand New In The Box This is the LOW RATIO gearbox for the larger style gearbox equipped machines, please ask if you are unsure about fitment. **Top speed on our 2012 Commander 1000 is 62 mph (high range) with this gearbox and stock clutching and stock size tires** Gearbox ratios, this isn’t regurgitated info, this is us counting teeth inside of the gearbox. Ring and Pinon Gears 37/15=2.467 Intermediate 45/40=1.125 High Range 36/27=1.333 Low Range 46/17=2.706 Reverse 34/12=2.833 High Range Ratio 3.700 Low Range Ratio 7.509 Reverse Ratio 7.863
  • New Genuine OEM Fits on: 2017-2019 Outlander and Renegades 2020 Outlander 650 STD DPS XT XMR 2020 Outlander 6×6 650 or 1000 2020 Renegade 570 XMR 3 position headlight switch OFF/Low/High beam Part number 710008837 replaces 710005070 Will come as pictured
  • NEW MRRPM Upper Motor Mount for installing 'big block" 1000 engines into a G1 chassis Steel, black in color
  • MRPRM Three bolt cam trigger, this is needed when running three bolt cams in an early G1 with the sensor in the front cylinder head.
  • NEW MOTUL 10W-40 Oil Change Kit 105938. Technosynthese – Ester lubricant developed for the latest generation of ATV / UTV used for recreational or utility activities. High temperature resistance, meets or exceeds requirements for API SM, SL, and SJ standards. Technosynthese is an ingenious combination of synthetic and high quality mineral base stocks for optimal performance and price competitiveness. Kit Includes: Three Liters of MOTUL 10W-40 Oil K&N Oil Filter KN-152 replaces OEM 420256188 711256188 Filter cover O ring Both sizes of drain plug crush washers
  • Moose racing G2 trailing arm bearing and seal kit with step bushings. Order two per ATV, as one kit will only be enough for one arm. Replaces OEM: Seal 293200132 Bearing 706000826 Spacer 706001225 706001282
  • 800/1000 Top end Gasket set Includes: 2 Head Gaskets 2 Cylinder Base Gaskets 2 Valve Cover Gaskets 2 Exhaust port crush gaskets 2 Intake Manifold Seals 8 valve seals Various O rings for fuel injectors, coolant fittings etc.. Moose gaskets are made to the same high quality standards as OEM. Part number 0934-3017