Renegade

  • Brand: Can-Am Part Number: 710004567
      • Required for installation of Heated Hand Grips & Throttle Combo.
     
    • Fits: (G2L) 2015-2016 Can-Am Outlander L 450, 2015 Can-Am Outlander L 500, 2016 Can-Am Outlander L 570, 2015-2016 Can-Am Outlander L Max 450, 2015 Can-Am Outlander L Max 500, 2016 Can-Am Outlander L Max 570, 2017-2020 Can-Am Outlander 450, 2017-2020 Can-Am Outlander 570, 2019-2020 Can-Am Outlander Max 450 6x6
  • New aftermarket 91mm bore piston and cylinder kit with gaskets rings wrist pins and circlips 10.3 compression ratio This is a ready to bolt on kit, this will work with 800HO 800R and 650 engines. If you install this on a 650 you will need to have your ecu flashed or a inline tuner installed. No dowel pins included, you will need to transfer these from your engine Replaces OEM Part Numbers: 420296775 420685714 420613586 420296774 420216270 420845106 420630210
  • NEW OEM Speedometer trim  found on Renegade XMR models. Part number 705015189
  • Can-am Rear Driveshaft G2 2019+ G2 Renegade 1000R base, XXC or XMR All New All OEM Shaft OEM U-joints, with OEM gearbox seal protector installed. **Please note, this is the most updated shaft and does not require a wear ring on the differential side of the shaft. The last two pictures illustrate this.** 20 Spline Gearbox side yoke (fits large type gearboxes) 20 Spline Differential side yoke (fits fits 705502808/705502546 rear differential) Current Part number: 703500990 Previous Part number: 703500928 703500901
  • NEW OEM Shock Heat Shield

    This helps keep heat from the exhaust melting your bump stop in your shock.

    Current part number 705210324 replaces 705209688

    ATVs equipped with piggy-back reservoir type shocks will need to cut the bracket to clear the shock. These are made for use with the standard black bodied shocks.
  • New G2 dual piston front right brake caliper with OEM pads. Fits G2 Renegade and Outlander 2012-2019 Genuine OEM part. Part number 705602188 replaces 705600861
  • Red wrap around wind deflector set with mounting kit. Fits Outlander, Renegade, & DS450. Both are brand new. Part numbers 715003811 & 715001378

  • Six Weights 24 gram each for CVtech Trailbloc Primary Part numbers: 0935-2010 or 0901-7110

  • New Can Am ATV 800 Standard Ratio Small Gear Box / Transmission Will work on all Can-am Vtwin 500/570/650/800/850 Both Outlander or Renegade.
    • New Can-Am GEAR BOX
    • Current Part Number- 420686714
    • Replaces: 420684780, 420685391, 420685392, 420685394, 420685396, 420685397
    • NEW OEM Canam Part NOT A REBUILD, ALL NEW
    • This is the Standard Ratio gearbox for any 500/570/650/800/850 v twin Can-am, Renegade or Outlander.
    2015 and newer non XMR outlander 1000/1000R have this style gearbox, if you have fitment questions, please contact us! Teeth count and gear ratio Ring & Pinion 32/13 = 2.462 High Gear set 34/29 = 1.172 Low Gear set 43/20 = 2.150 High final ratio 2.88:1 Low final ratio 5.29:1 Driveshaft bolt not included; this may be a different size from your current bolt.
  • Can Am Maverick X3 secondary clutch spreader tool This is a OEM tool Part number 708200720
  • New OEM Engine Case Half Gasket. Fits most G2 Can-Am V-Twin Engines. This is for the longer stroke (75mm) cases. Old Part Number: 420651225 New Part Number: 420651227
  • CVtech Spring Gold/Pink/Pink 400-1200 rate 0951-1025