New Can Am Maverick Renegade and Commander V-Twin EFI Speedo Speedometer Display Dash 2007-2013 Please understand 2014 and newer models require a different dash, even if yours looks the same. This is the factory Gauge/Screen. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. Contact for more information. It will display 0 miles, please record your current miles for your records. Current Part number: 710003288 Previous part numbers: 710001024 710001351 710001526 710001987 710002294 710002535
Orange wrap around wind deflector set with mounting kit. Fits Outlander, Renegade, & DS450 Both are brand new. Part numbers 715003813 & 715001378 Orange Crush matches 2020 and prior models.
- OUT OF STOCK
Brand New Genuine OEM Start/Stop Switch This is the new up to date switch Brand New still in original box Will come as pictured Works on many V-twin ATV’s Renegades and Outlanders will not work on 400’s please look at the plug style on your current switch. The buttons may be arranged differently we have found they will work on all V-twins DPS or non DPS 2006 to 2012. Part number 710000791 710004618 
SHIPS FREE TO THE LOWER 48 STATES Black and Yellow wrap around wind deflector set with mounting kit. This is not sunburst yellow, this is the older yellow. Fits Outlander, Renegade, & DS450. Both are brand new. Part numbers 715000525 & 715001378
New Genuine OEM Part number 715001706 Mounting kit sold separately
Updated Can-am Rear G2 Driveshaft Fits: 2019+ Outlander 1000R (excluding MAX and XMR) 2019+ Outlander 650/850 (excluding MAX) 2019+ Renegade 650/850 All new all OEM Shaft OEM U-joints. OEM protector ring installed Gearbox side yoke swapped to 18 spline Current Part number: 703500988 Previous Part number: 703500858 703500931 If you have a 2019+ 570 short wheel base single rider, this may be the correct shaft for your application, the parts fiche may not show the correct part number. You will need to measure the outer diameter of your rear differential's pinon seal, this shaft will only work with machines that have a 80mm pinion seal. If you measure 70mm you will need 703500986. 20 spline differential side yoke (fits 705502808/705502546 rear differential) 18 spline gearbox side yoke (small gearbox size) No wear ring needed, the deferential side yoke is machined to the outer diameter that a wear ring would be.
SHIPS FREE TO THE LOWER 48 STATES New Engine Top End Gasket Set by Moose Racing Fits 500 and 650 Machines Comes with: Cylinder Base Gaskets Cylinder Head Gaskets Valve Stem Seals Valve Cover Gaskets Injector Seals Intake Gaskets and Seals Exhaust Gaskets Thermostat O-Rings Coolant O-Rings Tensioner O-Rings Moose Racing gaskets are made to the same high quality standards as OEM gaskets Part number 0934-3016
Red wrap around wind deflector set with mounting kit. Fits Outlander, Renegade, & DS450. Both are brand new. Part numbers 715006118 & 715001378
New Aftermarket 1000/1000R Crankshaft with Connecting rods and bearings. No core needed, ready to install. *Will not fit Defender Maverick Sport/Trail* Replaces OE parts: 420219735 420219736 420217556 420217559 420641477 420641475 420233726
NEW OEM Shock Heat Shield
This helps keep heat from the exhaust melting your bump stop in your shock.
Current part number 705210324 replaces 705209688
ATVs equipped with piggy-back reservoir type shocks will need to cut the bracket to clear the shock. These are made for use with the standard black bodied shocks.
SHIPS FREE TO THE LOWER 48 STATES NEW OEM Canam Cam Chain and Guide Set for V Twin 1000 Order QTY 1 (one) per engine. Kit includes: 2 Silent Chains 420297068 2 Pivot Guides 420436017 2 Fixed Guides 420236583 2 Bottom Guides 420236350 ONLY WORKS WITH 1000 V TWINS To install the timing chain kit you will need to remove the PTO Cover, Stator Cover, and cylinder heads. We sell the gaskets and pullers required to do this. Check our other listings for these products
NEW Can Am OEM Cam Timing Tool For holding the cam in place for timing and tightening camshaft sprocket bolts For easy installation of new timing chains or just setting timing. OEM Number 529036268 replaces 529036231
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.