There are a few options for kits, please verify your differential uses this style of gears before ordering!

This will only fit six mounting hole differentials.

Late G1 Early G2 Standard Rear Differential Ring 36t and Pinion 10t gear set Pinion bolt size is M10, this may be different than what you are replacing.

OEM Rear Differential Gear set 10/36 Ring and Pinion gear set. The gears are straight cut as pictured. This kit should be installed by an experienced technician.

Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement. Measure your outer diameter of your axle seals! They should measure close to 1 3/4? (47mm) To further verify fitment you can measure your pinion pilot shaft, this should be 9/16″ (14mm) The pictures show this very clearly. Please take the time to measure your parts before buying this will save time and restocking fees.

New Can Am ATV Low Ratio Small Gear Box / Transmission

Will work on all Can-am Vtwin 500/570/650/800/850 Both Outlander or Renegade.

• New Can-Am GEAR BOX
• Current Part Number- 420686612
• Replaces: 420684820, 420684824, 420684825, 420684827
• NEW OEM Canam Part NOT A REBUILD, ALL NEW
• This is the Low Ratio (6.4% Lower HIGH Range) gearbox than a standard 800 gearbox.
• This is found in Outlander or Renegade 500’s, Outlander 650’s and the Outlander 800R XMR

Teeth count and gear ratio
Ring & Pinion 32/13 = 2.462
High Gear set 35/28 = 1.125
Low Gear set 43/20 = 2.150

High final ratio 3.078:1
Low final ratio 5.29:1

Driveshaft bolt not included; this may be a different size from your current bolt. We can help, just contact us.

2015 and newer non XMR outlander 1000’s have this style gearbox, if you have fitment questions, please contact us!

New OEM Can Am Outlander, Renegade 1000R XXC Gearbox

Current Part Number- 420686568
Previous Part Numbers- 420686565 NEW OEM Canam Part

NOT A REBUILD, ALL NEW Brand New In The Box

Fits- Maverick 1000R, Commander 1000 or 800, Outlander 1000 2012-2014, all Outlander XMR 1000/1000R, Renegade 1000/1000R.
If unsure of fitment, please contact us. We will be happy to help!

These ratios are published in the 2019 Service manual, we have not confirmed these to be accurate.
Ring and Pinon Gears 37/15=2.467
Intermediate 45/40=1.125
High Range 36/27=1.333
Low Range 46/17=2.706
Reverse 34/12=2.833

Overall Gear Ratios:
High Range 3.700
Low Range 7.510
Reverse Range 7.863