Renegade

  • New Can Am ATV 800 Standard Ratio Small Gear Box / Transmission Will work on all Can-am Vtwin 500/570/650/800/850 Both Outlander or Renegade.
    • New Can-Am GEAR BOX
    • Current Part Number- 420686714
    • Replaces: 420684780, 420685391, 420685392, 420685394, 420685396, 420685397
    • NEW OEM Canam Part NOT A REBUILD, ALL NEW
    • This is the Standard Ratio gearbox for any 500/570/650/800/850 v twin Can-am, Renegade or Outlander.
    2015 and newer non XMR outlander 1000/1000R have this style gearbox, if you have fitment questions, please contact us! Teeth count and gear ratio Ring & Pinion 32/13 = 2.462 High Gear set 34/29 = 1.172 Low Gear set 43/20 = 2.150 High final ratio 2.88:1 Low final ratio 5.29:1 Driveshaft bolt not included; this may be a different size from your current bolt.
  • This is the XMR 1000 rear differential found in 2013-2018 800R 850 1000/1000R XMR.

    It will fit g2 bikes (500/650/800/850/1000) if you are upgrading you will need to shorten your shaft 1.75? or buy a kit from us, please see our other listings.

    This differential has automotive style cut gears, tapered roller bearings, along with an overall larger gear size. There are a total of three bearings on the pinion gear giving it much more support over the standard rear differentials, this requires a shorter driveshaft, as mentioned earlier if you are swapping this in place of a standard differential.

    Pinion spline count 20, standard differentials use 18 spline pinion shafts, that are smaller in diameter. If you are upgrading you will need a 20 spline end yoke to match.

    In every way this is a beefier differential.

    To bolt your driveshaft on this differential you will need a M10x1.25 16mm long bolt (not included)

    Current part number 705503535
    Old part number 705502546 705502178,  705502090

  • Can-am Outlander, Renegade or Commander 500 650 800 1000 6 Bolt HD rear Differential. This is an OEM Canam part used in many Generation 1 atvs. It has the bracket for the rear brake caliper on it. This is an updated version with much more substantial webbing for improved support. Fits: 2006-2011 Outlander and Renegade 500 650 800 800 2012 Outlander MAX 400 500 650 800 2011 2012 Outlander 800XMR 2006-14 Outlander 400 2011-2013 Commander 800 1000 Current Part Number 703501033 Previous Part Numbers 703500892 705502069 705501569 Interchanges with: 705500774 705500822 705501412 705500891 705501093 705501047 705501997
  • Can-am Outlander, Renegade or Commander 500 650 800 1000 6 Bolt HD rear Differential.

    This is an OEM Canam part used in many Generation 2 atvs.

    It does not have the bracket for the rear brake caliper on it.

    This is an updated version with much more substantial webbing for improved support.

    Fits:
    2012 Outlander and Renegade 800, 1000
    2013 to 2018 500/570/650/800/1000 Outlander Renegade
    2011-2013 Commander 800 1000
    2013-2018  XMR 570 and 650

    **WILL NOT FIT** XMR 1000 or XMR 800
    WILL NOT FIT ALL 2019 Models, please contact us if you have a 2019.

    Current Part Number 703501019
    Previous Part Numbers 703500878, 705501896, 705501419, 705501993

  • SHIPS FREE TO THE LOWER 48 STATES NEW OEM Canam Parts OEM 14% LOWER LOW GEAR SET for most every 1000 Vtwins minus north american 2015 and newer outlander 1000/1000R This is the way to reduce the over all Low Gear ratio on your can-am 1000 running larger tires. This is the LOW RATIO for any Large Gearbox. The last picture shows a Large gearbox. This will not fit Small Gearboxes. 14% lower gear ratio than standard 1000 gear boxes (Maverick, Commander, Renegade, Outlander) Will also fit 800 Commander
  • NEW Genuine Can-am Rear Prop Shaft for G1 STD single seat machines WILL NOT FIT MAX. This will work with 2006-2011 500 650 800 800R, Outlander or Renegade and 2012 Outlander 500 650 or Renegade 500. The picture is what you will get. We install the wear ring and deflector ring for fast install. Current Part number: 703500801 Previous numbers: 703500767 703500719 705500816 703500704
  • NEW Genuine Can-am Rear Prop Shaft for 2012-18 Outlander Or Renegade 500, 570L, 570, 650, 800R or 850.

    Be sure to check part numbers before ordering if you have a 1000.
    This will work on 2015+ Outlander 1000 non XMR/T3 machines (small gearbox).

    This updated shaft does not need wear ring as it is simply machined larger in outer diameter.

    Current Part number: 703500986
    Previous Part numbers: 703500925 703500855 705501406

    18 spline gearbox side yoke
    18 spline differential side yoke

  • NEW Genuine OEM Can-am Rear Prop Shaft for 2012-14 Outlander 1000 NON XMR NON MAX Or 2012-18 Renegade 1000/1000R. NON XMR Comes with protector ring installed. Wear ring is not needed or included on this shaft. The yoke is simply machined larger in outer diameter. If you have any doubts about fitment, please count your splines on your gearbox output shaft and the pinion shaft on your differential. This shaft is for 20 spline gearbox output shaft and 18 spline rear differential. Current Part number: 703500991 Replaces Part Numbers: 703500929 703500862 705501413 705501258

  • New Can Am Maverick Renegade and Commander V-Twin EFI Speedo Speedometer Display Dash 2007-2013 Please understand 2014 and newer models require a different dash, even if yours looks the same. This is the factory Gauge/Screen. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. Contact for more information. It will display 0 miles, please record your current miles for your records. Current Part number: 710003288 Previous part numbers:  710001024 710001351 710001526 710001987 710002294 710002535
  • Can-am OEM PTO and crankcase bearing install and removal tools. These are the OEM tools required to install bearings in the bottom end of your Can-am V twin engine correctly. Part Numbers 529035917 & 529036032
  • SHIPS FREE TO THE LOWER 48 STATES NEW OEM Can Am Updated Cam Chain and Updated Guide Set 2006-Current V Twins 500, 570, 650, 800 These chains and guides are a common issue on 2006-2008 500/650/800 V-twin ATV’s. The chains fail and start cutting the plastic guides. One of two things happen: One, the Camshaft (generally the front cylinder head, first) becomes out of time, and the valves hit the piston. Two, the oil pick up screen becomes clogged with guide material. Engine oil can not be cycled through the engine, generally this spins the big end connecting rod bearings. This kit includes updated chains and guides, totally avoiding this problem. Order QTY 1 (one) per engine. Kit includes: 2 Chains 420297063 2 pivot guides 420436015 2 fixed guides 420236584 2 bottom guides 420236351 Will not work on 1000/1000R Engines To install the timing chain kit you will need to remove the PTO Cover, Stator Cover, and Cylinder Heads. We sell the gaskets and pullers required to do this. Check our other listings for these products
  • SHIPS FREE TO THE LOWER 48 STATES Updated Can-am Rear G2 Outlander/Renegade 2019 and newer prop shaft. All new all OEM Shaft OEM U-joints. OEM protector ring installed Input yoke swapped to 18 spline This is the correct length for short wheel base single seat 500/570/650/800/850 Outlander or Renegade with 1000 XMR rear differential. This will also work on 2015+ Outlander short wheel base, single seat 1000/1000R with 1000 XMR rear differential. Direct replacement for 2015 and newer 800/850 XMR Current Part number: 703500988 Previous Part number: 703500858 703500931 20 spline differential side yoke 18 spline gearbox side yoke No wear ring needed

Title