- Latest generation heavy-duty, high-twist Aramid Fiber cord for HIGH HORSEPOWER TENSILE LOAD requirements. Making it the strongest belt on the market.
- Highest shock load rating to date being able to withstand the power of the 400hp machines.
- Increased top cog pressure load design that increases sidewall rigidity, prevents top cog bowing, but still allows for increased rotational flexibility.
- Bottom cog uses HIGH MODULOUS RUBBER COMPOUND (BZX1) for better heat resistance and heat dissipation.
- Bottom cog is impregnated with short Aramid Fibers for better belt-to-sheave adhesion and reduced overall belt temperature.
- Latest bottom cog design for greater rotational efficiency at full shift.
- Precision ground sidewall angle (SCUFFING) for smooth engagement, increased power transfer and lower operating belt temperature.
- Aramid Fiber cord, versus polyester, wraps over bottom cogs for increased bottom cog strength.
- Increased cord pop-out resistance.
SHIPS FREE TO THE LOWER 48 STATES Fits all 500, 650, 800, 800R, 570, 850, 1000, 1000R and 1000R turbo Mavericks Outlanders, Renegades, and 2020 & Prior Commanders. Replaces OEM part numbers 715000302, 422280360, 715900212, and 422280364. This will not fit: Defenders, Maverick X3 or Maverick Sport/Trail World’s Best Belt Line
Can Am OEM parts.
Spring and Spring Cup set, two springs and two spring cups.
These are the little parts that go flying across the shop floor when you open up your Can Am factory primary clutch.
These parts are what helps give your machine engine braking.
Part numbers: 420229577 420239134
neapco Brand U joint for front drive shafts These U joints are made in Italy, please do not confuse these with the sub-grade china made u joints. Fits: G1 Renegade and Outlander . Also works on Outlander 400 Rear shafts. Maverick/Commander front driveshafts Will not fit: Maverick X3/Sport/Trail or Defender Includes clips, and grease fitting. Pro tip: Install grease fitting before pressing in u joint. Install u joint in a manner where you can still grease the joint in chassis. Replaces OEM : 715900325 703000023 703000024 703500002 703500135 703500607 703500814
SHIPS FREE TO THE LOWER 48 STATES Black and Yellow wrap around wind deflector set with mounting kit. This is not sunburst yellow, this is the older yellow. Fits Outlander, Renegade, & DS450. Both are brand new. Part numbers 715000525 & 715001378
MANTA GREEN wrap around wind deflector set with mounting kit. Fits Outlander, Renegade, & DS450. Both are brand new. Part numbers 715003812 & 715001378
New OEM Ignition and Match keys. Comes with main key and back up key. These are not the electronic black keys, these are cut keys to match the ignition switch. 3 way key position (controls headlights also). Part number 710002323
New XPS SAE 75W-90 and 75W-140 Synthetic Gear Oil Kit. Enough to do a complete service on the front differential, rear differential, and gear box 1 U.S QT 946ml per bottle Listing is for 2 Quarts. See your owners manual before ordering to make sure you order the correct weight for your Can Am Part number 779160 and 779158
CVtech Spring Gold/Pink/Pink 400-1200 rate 0951-1025
Six Weights 20 gram each for CVtech Trailbloc Primary Part numbers: 0935-2008 or 0901-7108
EPI heavy duty rear springs. 25% stiffer than factory springs. 250# Rate Great if you haul or have added weight with passenger or agricultural attachment. These ride very well when paired with the FOX shocks. Fits: G2 Outlander/Renegade shocks Part number WE325121
EPI heavy duty front springs. 25% stiffer than factory springs. Great if you haul or have added weight with a snow plow. These ride very well when paired with the FOX shocks. Fits: G2 Outlander/Renegade shocks that have 2 inch shock bodies
Air Filter for G1 Outlander and Renegades. Replaces OEM 707800174 Fits 500, 650, and 800HO NON-R 800 engines, from 2006 – 2012. Bonded, two-layer .65" foam designed for maximum protection and airflow Coarse outer foam traps large particles while fine inner foam catches the finest dust With the precision pre-oiled air filter, there is no excess oil to rob horsepower, and no dry spots endangering your engine Made in the U.S.A.
High quality Timken axle oil seal. Fits ATV front differentials 2006-current, some UTV's To be 100% sure on fitment, measure your outer diameter on your seal, it should read 47mm This seal has a 25mm inner diameter 47mm outer diamter and is 7mm thick. Replaces OEM 705500255 705500081 Order qty two per machine.
High quality aftermarket Timken or SKF axle oil seal. Fits ATV rear differentials 2015-current, some UTV’s To be 100% sure on fitment, measure your outer diameter on your seal, it should read 52mm This seal has a 30mm inner diameter 52mm outer diamter and is 8mm thick. Replaces OEM 705501556 Order qty two per machine.
High quality Timken axle oil seal. Fits ATV rear differentials 2006-2014 To be 100% sure on fitment, measure your outer diameter on your seal, it should read 47mm This seal has a 30mm inner diameter 47mm outer diamter and is 7mm thick. Replaces OEM 705500751 705501196 and 705501996 Order qty two per machine.
Works on the G1 Outlander, G1/G2 Renegade, and nearly any other utility quad with available mounting area (8"x3") Includes 2 foot pegs and mounting hardware. Foot Pegs measure 9" long by 3" wide These Rox Speed FX Universal ATV Foot Pegs for utility quads have been designed to add aggressive traction to your OEM floor boards. Used by some of the top GNCC riders, these foot pegs are MADE IN THE USA and built to handle the dirtiest, nastiest terrain you can throw at them! Replaces OEM pegs 705000428 705003648 705002326
Radiator Relocate kit for Gen 2 Renegade 570 650 800 850 1000 1000R 2012-2022. Renegade Extreme Front Bumper (715002469) required for installation (except on XMR models) Part Number: 715001929. New Genuine OEM. Will come as pictured.
New OEM Blue fuel injector Part Number: 420874402 Will come as pictured
New G2 dual piston front right brake caliper with pads. Fits G2 Renegade and Outlander 2012+ Replaces Part number 705600861
Used OEM Can Am Outlander and Renegade rear brake lever or brake pedal. It will fit any 2006-2012 Outlander or Renegade 400, 500, 650 and 800. Great shape not bent. Comes as pictured
Six Weights 16 gram each for CVtech Trailbloc Primary Part numbers: 0935-2006 or 0901-7106
Cvtech 1 Way assembly bearing for use on all canam cvtech primary clutches. *will not fit other makes*
Part number 0940-0001
35mm Inner Diameter
52mm Outer Diameter
24mm WideThis is a great video showing how to install –>>LINK HERE<<–
Can Am 2012-2015 G2 800/1000 Outlander Renegade Commander Will not fit 1000R Complete Engine Gasket Set Moose Racing Gasket kit 0934-3020
New take off Unit-51 Removed From Machine With 9.5 Miles. Fits G2 Outlander and G2 Renegade Old part number 705201907 New part number 705203387
