Brand New OEM Can Am 2019+ iTC (Intelligent Throttle Control) Outlander Renegade throttle-by-wire and 4×4 Switch Housing
Part Number 707003183 replaces 707002684 707002272
Gearbox Shift Shaft Seal 28mm OD 12mm ID 7mm Thick Part numbers: 711250450 420250450
Differential Vent Tube 8mm diameter Part number 705501584
New OEM Blue fuel injector Part Number: 420874402 Will come as pictured
New Genuine OEM Fits G2 machines from 2012-2018 Perfect for plowing snow or hauling heavy loads Improves handling 14.5" long with a I.D of 2" Part number 715003200
New OEM Cylinder Head Gasket Fits Defender HD5 Outlander 450 and 850 Renegade 850 Will come as pictured Part number 420450340
Allows the installation of accessories with 16” base on LinQ racks. Tool-less installation and removal. Part number 715004960
Brand New Genuine OEM
Fits G2 Outlander 2012-2020
Seals gap between the side panel and CVT cover
Current part number 715007294 Replaces 715007008
Quick and easy install (no drilling needed)
New OEM Can Am Outlander, Renegade 1000R XXC Gearbox
Current Part Number- 420686568
Previous Part Numbers- 420686565 NEW OEM Canam PartNOT A REBUILD, ALL NEW Brand New In The Box
Fits- Maverick 1000R, Commander 1000 or 800, Outlander 1000 2012-2014, all Outlander XMR 1000/1000R, Renegade 1000/1000R.
If unsure of fitment, please contact us. We will be happy to help!These ratios are published in the 2019 Service manual, we have not confirmed these to be accurate.
Ring and Pinon Gears 37/15=2.467
Intermediate 45/40=1.125
High Range 36/27=1.333
Low Range 46/17=2.706
Reverse 34/12=2.833Overall Gear Ratios:
High Range 3.700
Low Range 7.510
Reverse Range 7.863
NEW Quad Logic Brand G2 ATV Can Am Airbox Seal Part number 500-1139-PU This is an improved design over factory Apply a small amount of grease to aid install, this is much thicker and denser than the OEM o-ring or gasket Replaces OEM part numbers: 293300165 293300175 293300179
New Genuine OEM Mounting kit sold separately Part number 715003814
New aftermarket 91mm bore piston and cylinder kit with gaskets rings wrist pins and circlips 12.1 compression ratio This is a ready to bolt on kit Fits: 2013+ Maverick, Maverick Sport and Commander 1000R Please note this kit will not fit the ATV 1000R or any 1000 engine due to the compression ratio. No dowel pins included, you will need to transfer these from your engine Replaces OEM Part Numbers: 420623566 420623568 420686094 420685244 420296774 420630195 420216352 420216351 420630210
New Genuine OEM Made of aluminum Large ports for clearing of snow and mud Aggressive design for improved traction Will not work with body side protectors Sold in pairs All hardware is included Click here for instructions
White wrap around wind deflector set with mounting kit. Fits Outlander, Renegade, & DS450. Both are brand new. Part numbers 715000537 & 715001378
New oem head gasket fits 570 machines, order two per engine Part number: 420630852
New Genuine OEM Can-am radiator cooling fan assembly Fits G2 1000 1000R XMR Outlander, please check part numbers for fitment. Current part number 709200565 Old part number 709200458
NEW OEM G2 ATV Battery Hold Down Fixation Plate Kit. This retains the battery in place, and gives your seat something to latch into Kit includes: Fixation Plate 710009129 replaces 710002404 Positive Battery Terminal Cover 710006729 Rubber Stopper 705014429 Three aftermarket stainless bolts
Used ECM (computer) with OEM Digital Key.
This pair is tested, cleared of any codes and run on our shop ATV before leaving. Your Dash (speedometer) may need to be paired with BUDS. If you want to start and run the machine simply unplug the dash before installing the ecu. We provide the pairing service free of charge with purchase of ECU or Dash, contact us for further details.
Only fits Generation 1 ATV Outlander 650 2006 2007 2008 2009
please note 2010 models use a different style ECU, this will not work on 2010 and newer
Part Number: 420266501 420266505 710000817
G1 2006-2007 atv’s with non reservoir shocks. Your shock body should measure 1.5 inches 25% stiffer over stock springs, great alternative to lift pucks. Rears will retain the factory short spring Will not fit 400/500 struts. WE322010 WE322000
New Air filter made by All Balls Racing. This is an OEM replacement filter for early G1 500 650 800HO Outlander or Renegade Please note this will not fit the 800R ATVs Replaces OEM 707800174
Set of four Moose gas shock kit for G1 Outlander 650/800 or Renegade 500/800 These shocks are the same length on all four corners, you may notice a slight lift, more so on a well used machine. *Please note these will not work in place of struts found on the Outlander 400/500 machines. Features: Moose gas shocks offer long term consistent performance over stock oil only damped shocks 10% stiffer springs provide a better ride and higher load capacity Works great on the front to better support your snowplow and on the rear when hauling cargo Smooth black color blends perfectly on your machine Direct bolt-on replacement: pre-installed spring allows for quicker setup P/N13102146X4
New aftermarket switch replaces OEM part numbers: 710008837 710005070 710000791 710004618 703500920 710003062 710002883 710003039 710004041 Fits on: 2006-2019 Outlander and Renegades 500 650 800HO 800R 850 1000 1000R 2020 Outlander 650 STD DPS XT XMR 2020 Outlander 6x6 650 or 1000 2020 Renegade 570 XMR Will not work on 400’s or machines with drive by wire. 3 position headlight switch OFF/Low/High beam Will come as pictured Please look at the plug style on your current switch. The buttons may be arranged differently than the switch you are replacing. We have found this switch will work on DPS or non DPS equipped machines
New OEM Ball Joint for 2006-2012 Gen 1 Can-Am Outlanders 706200444 This is the bolt in style. DOES NOT come with bolts.
New Oem Canam Pinion nut, this is spun on to the pinion gear to retain the bearings on the pinion gear of xmr differentials on ATV XMR's G2 800/850/1000/1000R This is not needed on 570 or 650 XMR models The threads are M28x1.25 Right Hand the outer diameter is 51mm Please check that this is the correct nut for your application Part number 705501550
SHIPS FREE TO THE LOWER 48 STATES Updated Can-am Rear G2 Outlander MAX 2019 and newer prop shaft. All new OEM Shaft OEM U-joints. OEM protector ring installed This is the correct length for long wheel base Outlander MAX machines 500/570/650/800/850 with 1000 XMR rear differential. This will also work on 2015+ Outlander long wheel base, MAX 1000/1000R with 1000 XMR rear differential. Direct replacement for 2019 and newer Outlander MAX 570/850/1000R Current Part number: 703501017 20 spline differential side yoke 18 spline gearbox side yoke No wear ring needed
NEW extra firm G1 outlander 500 650 800 800R seat foam. Use with seat part numbers 715500323 708000756 708000507 708000402 708001649 This is just the foam, no cover or pan.- OUT OF STOCK
NEW OEM Can Am Tool M8x1.25 Tapered Bolt Part number 529036098. This tool fills a few roles, used to open the secondary clutch on many models. This will also lock the crankshaft on Vtwin's and three cylinder models. If you are unsure on application please reach out to us, we are here to help! - OUT OF STOCK
OEM CVT intake breather P/N 707000777 Will work on 2006 to 2011 can-am v-twins(500,650,800) and 2012 500/650 800MAX Please understand 2012 800 Outlanders are G2 and 2012 Outlander Max 800 are G1 If you are unsure on fitment, please ask us! - OUT OF STOCK
Can Am OEM non power steering stem for G1 Outlander and Renegade 500 650 800HO 800R 2006-2012 Will only work with non power steering bikes Brand New OEM Part number 709400971 
Works on the G1 Outlander, G1/G2 Renegade, and nearly any other utility quad with available mounting area (8"x3") Includes 2 foot pegs and mounting hardware. Foot Pegs measure 9" long by 3" wide These Rox Speed FX Universal ATV Foot Pegs for utility quads have been designed to add aggressive traction to your OEM floor boards. Used by some of the top GNCC riders, these foot pegs are MADE IN THE USA and built to handle the dirtiest, nastiest terrain you can throw at them! Replaces OEM pegs 705000428 705003648 705002326
NEW OEM BRP Magnetic button to cycle through displays on your dash/speedometer Please compare this to your original button Part number 715900265 Works with base digital dash, if you are unsure on fitment please contact us we will help.
1447 NEW OEM Needle bearing 14x20.65x19 Size These are KOYO Bearings high quality 14mm Inner Diameter 20.65mm Outer Diameter 19mm Long Replaces OEM Part number 705501408
Aftermarket Fuel pump kit with pickup sock lines and seal Part number 1009-0090 Works with: 2016+ Defenders HD5 HD8 HD10 Outlander 450/570 and Renegade 570 Replaces the pump in sending units part numbers 709000461 and 709000662
All Balls Racing Fuel Pump Assembly Sending Unit Part number 47-1023 24-71023 1009-0138 Fits: 2006-2008 Outlander/Renegade 500 650 800HO Replaces OEM : 703500771
New OEM Engine Case Half Gasket. Fits All G1 Can-Am V-Twin Engines. Fits 500, 570, 650 G2 V-Twin Engines Part Number: 420651220
New Demon Heavy Duty Axle Front Right (throttle side) Fits: 2019+ ATV Outlander/Renegade 650 850 1000R Part number PAXL-3063HD Replaces OEM 705402238 705402236 Through years of research and development Demon Powersports has developed an axle that doesn’t burn a hole in your pocket and adheres to the highest quality standards. These axles are bigger, beefier, and stronger. Demon Heavy Duty Axles are built using larger CV joints and shafts, paired with our proprietary dual heat treatment process, and 4340 Chromoly Steel inner CV cage gives these the axles the edge it needs for superior strength and longevity. These axles also utilize a unique double plunge design which allows it to achieve higher articulation angles approximately, the axles are designed to slide on the bar splines allowing for 1.5 inches of travel and 40° articulation over terrain on the inboard joint. The outboard joint can travel 0.5inches and swing from 45°-47° depending on the model. The Demon heavy duty axles are equipped The TPEE (Thermoplastic polyester elastomer) boots which are stronger, stiffer, more fatigue resistant, puncture resistant, and more temperature resistant than a standard OEM boot. Axles use molybdenum grease to provide low friction and smooth motion. Trust in Demon Heavy Duty Axles to keep you riding!! • 15%-20% increase in diameter compared to regular axle • Inner cage made up of 4340 chromoly steel • Dual heat treated high strength chromoly steel shaft • Thermoplastic polyester elastomer (TPEE) Boot • 10%-15% increase in CV joint size compared to regular joints • Wider articulation angles • Dual plunge design prevents axle from binding • Packed with high load molybdenum grease Precision CNC machined • Can Fit 1.5”- 5” Bracket lift of particular brands/ All Portal Gear Lifts / 1.5”- 5” A-arms of particular brands • 1-year ltd warranty
