Outlander

  • BRP part number 715005159 Kit includes 4 springs.

    Fits: 2019+ 650 or larger Outlanders with base black bodied shocks.

    Heavy-duty springs provide enhanced stiffness.

    Perfect for snow clearing and hauling heavy loads.

    Improves handling.

    Standard on Outlander PRO and Mossy Oak models.

  • OUT OF STOCK
    SHIPS FREE TO THE LOWER 48 STATES New Forged OEM Can-am piston kit with rings. Matched to an OEM Rotax used  Cylinder. This is ready to install on your 650 Outlander engine. Two are required per engine. Piston comes with rings installed. Piston pin, and clips are not included. Part number 420684111 420613888
  • All Balls complete fuel pump module, retaining nut and gasket This fits G1 Models: 2009-2015 EFI Outlander 400 2009-2012 Outlander or Renegade 500 2009-2012 Outlander 650 2009-2011 Outlander 800R 2012 Outlander 800R XMR 2012 Outlander 800R MAX 2009-2011 Renegade 800R Part number: 47-1049 24-71022 Replaces OEM numbers: 703500766 703500781 709000194 709000245
  • Brand new inner secondary clutch This inner clutch has the hole for the pig tale style spring but will work on springs without the pig tale. New OEM Part Part Numbers : 420280499 420280235 420248233 420280236 420280238 420280497
  • SHIPS FREE TO THE LOWER 48 STATES OEM BRP Heated Grips and Thumb kit.
    •  LED dimmer facilitates reading temperature settings. 4 temperature settings with individual controls for thumb and grips. Returns to previous heat setting. One-touch shutdown. Compatible with Intelligent Throttle Control (ITC). Wiring Cable (710004567) is required for installation on G2 650 and G2L 570.
    Fits 2020+ models equipped with 850 engine and 2019+ models with 1000R engine, and European vehicles Part Number 715004815
  • NEW Take Off G2 Outlander Renegade Left Swing Arm 706001860 Removed From Machine With 9.5 Miles.
  • New Genuine OEM Made of aluminum Large ports for clearing of snow and mud Aggressive design for improved traction Will not work with body side protectors Sold in pairs All hardware is included Click here for instructions 
  • SHIPS FREE TO THE LOWER 48 STATES Updated Can-am Rear G2 Outlander/Renegade 2019 and newer prop shaft. All new all OEM Shaft OEM U-joints. OEM protector ring installed Input yoke swapped to 18 spline This is the correct length for short wheel base single seat 500/570/650/800/850 Outlander or Renegade with 1000 XMR rear differential. This will also work on 2015+ Outlander short wheel base, single seat 1000/1000R with 1000 XMR rear differential. Direct replacement for 2015 and newer 800/850 XMR Current Part number: 703500988 Previous Part number: 703500858 703500931 20 spline differential side yoke 18 spline gearbox side yoke No wear ring needed
  • Updated Can-am Rear G2 Driveshaft Fits: 2019+ Outlander 1000R (excluding MAX and XMR) 2019+ Outlander 650/850 (excluding MAX) 2019+ Renegade 650/850 All new all OEM Shaft OEM U-joints. OEM protector ring installed Gearbox side yoke swapped to 18 spline Current Part number: 703500988 Previous Part number: 703500858 703500931 If you have a 2019+ 570  short wheel base single rider, this may be the correct shaft for your application, the parts fiche may not show the correct part number. You will need to measure the outer diameter of your rear differential's pinon seal, this shaft will only work with machines that have a 80mm pinion seal. If you measure 70mm you will need 703500986. 20 spline differential side yoke (fits 705502808/705502546 rear differential) 18 spline gearbox side yoke (small gearbox size) No wear ring needed, the deferential side yoke is machined to the outer diameter that a wear ring would be.
  • NEW Genuine Can-am Rear Prop Shaft for 2012-18 Outlander Or Renegade 500, 570L, 570, 650, 800R or 850.

    Be sure to check part numbers before ordering if you have a 1000.
    This will work on 2015+ Outlander 1000 non XMR/T3 machines (small gearbox).

    This updated shaft does not need wear ring as it is simply machined larger in outer diameter.

    Current Part number: 703500986
    Previous Part numbers: 703500925 703500855 705501406

    18 spline gearbox side yoke
    18 spline differential side yoke

  • New G2 dual piston Left Right Brake caliper with OEM pads.

    Fits G2 Renegade and Outlander 2012-current

    Genuine OEM part. Part number 705600860

  • NEW Take Off G2 Can Am Outlander 570 Fuel Pump Assembly Part Number 709000461 From Machine With 9.5 Miles.
  • SHIPS FREE TO THE LOWER 48 STATES New OEM Standard G2 Rear Differential Ring & Pinion Gear Set 1652 There are a few options for kits, please verify your differential uses this style of gears before ordering! This will only fit six mounting hole differentials. OEM Rear Differential Gear set 10/36 Ring and Pinion gear set. The gears are straight cut as pictured. Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement. Measure your outer diameter of your axle seals! They should measure close to 2 1/16? (52mm) To further verify fitment you can measure your pinion pilot shaft, this should be 5/8? (16mm) Please take the time to measure your parts before buying this will save time and restocking fees. Fits 2015 -2019  G2 style ATV 500/570/650/800/850/1000/1000R NON-XMR style REAR differential. 570/650 XMR machines do not have the true XMR differential.
  • OUT OF STOCK
    Made in the USA Specialized ATV, made some strong, tough rods that will hold up to whatever kind of riding you like. 6061 Billet Rods with 5/8 heim joints and all the needed hardware to install. 1 year warranty from date of purchase, directly from SPATV 1 set comes with 2 tie rods and complete assembled heims and hardware. Fits G2 Outlanders and Renegades 2012+ (even the wider 2019+ machines)
  • 2013-2019 driveshaft for Outlander Max machines New Genuine OEM Old Part Numbers 703500863 703500926 Current Part Number 703500987 18 Spline end yokes. Perfect for machines with a small gearbox and a standard rear differential.
  • OUT OF STOCK
    Inline fuel controller, this unit takes the fuel signal and modifies it based on throttle position and RPM inputs. Part number FC25009, please contact us if you have fitment questions. You can use a pre built map table or build your own custom map. Software is compatible with Power Commander, so you can download Power Commander maps to the unit Plug-n-play fuel management device pre-programmed with make/model specific maps Fully adjustable computer compatibility for ultimate tuning and personalization Use OEM-style connectors and high-quality wiring harnesses No computer necessary to modify fuel management Small, lightweight, and easy to fit on your bike Integrated O² optimizer where applicable
  • OUT OF STOCK
    Dash/Speedometer for specific G2 500/650/800/1000R bikes. Please ask to confirm fitment if you are unsure, there are a few dashes that look the same. This is the factory Gauge/Screen for some 2018-20 G2 models. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. It will display 0 miles, please record your current miles for your records. Current Part Number 710005599
  • NEW Genuine OEM Can-am Rear Prop Shaft for 2012-14 Outlander 1000 NON XMR NON MAX Or 2012-18 Renegade 1000/1000R. NON XMR Comes with protector ring installed. Wear ring is not needed or included on this shaft. The yoke is simply machined larger in outer diameter. If you have any doubts about fitment, please count your splines on your gearbox output shaft and the pinion shaft on your differential. This shaft is for 20 spline gearbox output shaft and 18 spline rear differential. Current Part number: 703500991 Replaces Part Numbers: 703500929 703500862 705501413 705501258

  • NEW Take Off Can Am Outlander Renegade Radiator Part number 709200286 Great shape, no leaks, this was removed from a machine with 9.5 miles.
  • This part is made for 2016-current Outlander and Renegade 1000R’s, but would be perfect for a machine with a larger aftermarket clutch or any machine using a Maverick Primary, as this cover has more room inside for the stud.

    Comes with the NEW UPDATED 420612310 cover

    This kit will keep the water out!

    Comes with:
    2016-current Outlander and Renegade 1000R’s covers inner and outer.
    CVT Cover Gasket
    CVT plug
    PTO O-ring
    Gear box O-ring
    Inner CVT Bolts/Nut
    13 Cover screws

    Part numbers
    420612316
    420440568
    420612304
    420430408
    420631088
    420441311
    420430126
    707001179

     

  • Dash/Speedometer for G2 500/650/800/1000 bikes. This is the factory Gauge/Screen. for 2014-18 G2  models. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. It will display 0 miles, please record your current miles for your records. Current Part Number 710003923 Replaces Part Number 710003454
  • Brand new aftermarket secondary clutch assembly This is found on many BRP ATVs. Please ask if you have fitment questions. Replaces OEM Part Part Numbers: 420280173 420280176 420280178 420932421 420280236 420280499 420245910 420245911 420220913 If your machine has a spring with pigtails you will need to use a spring without them as this aftermarket clutch does not have provisions for them. 420238176 OEM Black/Orange is a great substitute Installation Torque Specs: 45 ft·lb On the Secondary Bolt (red thread locker recommended, allow to set up overnight)
  • SHIPS FREE TO THE LOWER 48 STATES NEW OEM Canam Parts OEM 14% LOWER LOW GEAR SET for most every 1000 Vtwins minus north american 2015 and newer outlander 1000/1000R This is the way to reduce the over all Low Gear ratio on your can-am 1000 running larger tires. This is the LOW RATIO for any Large Gearbox. The last picture shows a Large gearbox. This will not fit Small Gearboxes. 14% lower gear ratio than standard 1000 gear boxes (Maverick, Commander, Renegade, Outlander) Will also fit 800 Commander
  • SHIPS FREE TO THE LOWER 48 STATES Dash swap kit for G2 2012-17 Can-Am ATV’s. WILL NOT FUNCTION 100% on the L models 400/450/500/570 Please note some 2012-13 models may show "dps overheat" This is the factory gauge from the XT-P models. Dual Analog Style read outs. This has the built in coolant temperature gauge, a must for riding in extreme conditions! Brand new dash with 0 miles the Engine hours stay with the ecu, be sure to record your miles for your own records. Dash is set from the factory in KM/H and will require BUDS programming to change it to MPH  This can be done at your local dealer or we offer this free of charge with purchase if you would like to stop by or you can send us your ecu, dash, key and DPS (power steering) if factory equipped. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. Part Number: 710005075 705006322

Title