- OUT OF STOCK
NEW OEM BRP Magnetic button to cycle through displays on your dash/speedometer Please compare this to your original button Part number 715900265 Works with base digital dash, if you are unsure on fitment please contact us we will help. 
New Genuine OEM Part number 860200387 Fits G1 G2 and G2L Renegade Outlander and Outlander MAX machines Will not fit G3L models ?Comes with spare key Will come as pictured- OUT OF STOCK
SHIPS FREE TO THE LOWER 48 STATES Squadron Green wrap around wind deflector set with mounting kit. Fits Outlander, Renegade, & DS450 Both are brand new. Part numbers 715006117 & 715001378
Radiator Relocate kit for Gen 2 Renegade 570 650 800 850 1000 1000R 2012-2022. Renegade Extreme Front Bumper (715002469) required for installation (except on XMR models) Part Number: 715001929. New Genuine OEM. Will come as pictured.
Works on the G1 Outlander, G1/G2 Renegade, and nearly any other utility quad with available mounting area (8"x3") Includes 2 foot pegs and mounting hardware. Foot Pegs measure 9" long by 3" wide These Rox Speed FX Universal ATV Foot Pegs for utility quads have been designed to add aggressive traction to your OEM floor boards. Used by some of the top GNCC riders, these foot pegs are MADE IN THE USA and built to handle the dirtiest, nastiest terrain you can throw at them! Replaces OEM pegs 705000428 705003648 705002326
CVtech Slider Shoe HD set of nine for ribbed plate 0982-7055 Replaces 0930-3020
OEM Rotax Cylinder Base gasket Fits many Canam ATVs Outlander/Renegade 450 or 850 Unsure on fitment? Please ask! Part number 420450330
Set of four Bronco gas shock kit for G2 2012-2018 Outlander 500/570/650/800/800R/850/1000/1000R or Renegade 500/570/800R/850/1000/1000R
These shocks are the same length on all four corners, you may notice a slight lift, more so on a well used machine.
*Please note these will not work on the wider 2019+ ATVs.
Features:
Bronco gas shocks offer long term consistent performance over stock oil only damped shocks
10% stiffer springs provide a better ride and higher load capacity
Works great on the front to better support your snowplow and on the rear when hauling cargo
Smooth black color blends perfectly on your machine
Direct bolt-on replacement: pre-installed spring allows for quicker setupP/N AU-04340 AU-04440
SHIPS FREE TO THE LOWER 48 STATES Updated Can-am Rear G2 Outlander MAX 2019 and newer prop shaft. All new OEM Shaft OEM U-joints. OEM protector ring installed This is the correct length for long wheel base Outlander MAX machines 500/570/650/800/850 with 1000 XMR rear differential. This will also work on 2015+ Outlander long wheel base, MAX 1000/1000R with 1000 XMR rear differential. Direct replacement for 2019 and newer Outlander MAX 570/850/1000R Current Part number: 703501017 20 spline differential side yoke 18 spline gearbox side yoke No wear ring needed
New Oem Canam Pinion nut, this is spun on to the pinion gear to retain the bearings on the pinion gear of xmr differentials on ATV XMR's G2 800/850/1000/1000R This is not needed on 570 or 650 XMR models The threads are M28x1.25 Right Hand the outer diameter is 51mm Please check that this is the correct nut for your application Part number 705501550
New OEM Ball Joint for 2006-2012 Gen 1 Can-Am Outlanders 706200444 This is the bolt in style. DOES NOT come with bolts.
NEW extra firm G1 outlander 500 650 800 800R seat foam. Use with seat part numbers 715500323 708000756 708000507 708000402 708001649 This is just the foam, no cover or pan.
New Air filter made by All Balls Racing. This is an OEM replacement filter for early G1 500 650 800HO Outlander or Renegade Please note this will not fit the 800R ATVs Replaces OEM 707800174
All Balls Racing Fuel Pump Assembly Sending Unit Part number 47-1023 24-71023 1009-0138 Fits: 2006-2008 Outlander/Renegade 500 650 800HO Replaces OEM : 703500771
1447 NEW OEM Needle bearing 14x20.65x19 Size These are KOYO Bearings high quality 14mm Inner Diameter 20.65mm Outer Diameter 19mm Long Replaces OEM Part number 705501408
Can Am OEM non power steering stem for G1 Outlander and Renegade 500 650 800HO 800R 2006-2012 Will only work with non power steering bikes Brand New OEM Part number 709400971
G1 2006-2007 atv’s with non reservoir shocks. Your shock body should measure 1.5 inches 25% stiffer over stock springs, great alternative to lift pucks. Rears will retain the factory short spring Will not fit 400/500 struts. WE322010 WE322000
OEM CVT intake breather P/N 707000777 Will work on 2006 to 2011 can-am v-twins(500,650,800) and 2012 500/650 800MAX Please understand 2012 800 Outlanders are G2 and 2012 Outlander Max 800 are G1 If you are unsure on fitment, please ask us!
NEW OEM BRP Drive Belt. Part number 422280225 This fits the big single cylinder models 2022+ Outlander 700 Outlander HD7 Pro Commander 700 Maverick Trail 700 Defender HD7 Traxter HD7 FITMENT QUESTIONS?? PLEASE ASK! Comes as pictured
Kit includes one universal boot, one reusable cone tool, two stainless steel clamps, grease pack, and silicone cone lube and instructions Expandable universal CV boot, slides and expands over reusable cone tool for trail side CV boot replacement Lithium based molybdenum grease ensures good lubrication for long CV joint life XL version of the original EZ Trail boot designed to fit UTVs and large ATVs Material is expandable yet tough enough to be a permanent fix Two clamping diameters ensure a good fit on most vehicles Boot material stays flexible in extreme cold temperatures
NEW OEM Can Am Tool M8x1.25 Tapered Bolt Part number 529036098. This tool fills a few roles, used to open the secondary clutch on many models. This will also lock the crankshaft on Vtwin's and three cylinder models. If you are unsure on application please reach out to us, we are here to help!- Sale!
Brand New Klotz Full Synthetic Oil Change Kit. Ultra convenient “all in one” kit saves time and money. For Can-am off road vehicles with 500cc or larger Vtwin Rotax engines. Excludes Traxter and Quest. Not compatible with Maverick X3 Includes 3 quarts synthetic oil 10W50, 0-ring , Highflow HF152 oil filter, and copper washer for both old style and new style drain plugs. 10w50 oil, great for hot climates, temperature range -13*F to 122*F Will not ship in original box 
Set of four Moose gas shock kit for G1 Outlander 650/800 or Renegade 500/800 These shocks are the same length on all four corners, you may notice a slight lift, more so on a well used machine. *Please note these will not work in place of struts found on the Outlander 400/500 machines. Features: Moose gas shocks offer long term consistent performance over stock oil only damped shocks 10% stiffer springs provide a better ride and higher load capacity Works great on the front to better support your snowplow and on the rear when hauling cargo Smooth black color blends perfectly on your machine Direct bolt-on replacement: pre-installed spring allows for quicker setup P/N13102146X4
New aftermarket 91mm bore piston and cylinder kit with gaskets rings wrist pins and circlips 12.1 compression ratio This is a ready to bolt on kit Fits: 2013+ Maverick, Maverick Sport and Commander 1000R Please note this kit will not fit the ATV 1000R or any 1000 engine due to the compression ratio. No dowel pins included, you will need to transfer these from your engine Replaces OEM Part Numbers: 420623566 420623568 420686094 420685244 420296774 420630195 420216352 420216351 420630210
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.