Replaces OEM 703500836 Japan Made Uncaged Needle Bearing 20X27X15mm Needle Bearing for XMR rear differential pinion gear
New Genuine OEM Fits on: 2017-2019 Outlander and Renegades 2020 Outlander 650 STD DPS XT XMR 2020 Outlander 6×6 650 or 1000 2020 Renegade 570 XMR 3 position headlight switch OFF/Low/High beam Part number 710008837 replaces 710005070 Will come as pictured
EPI Lower Ball Joint Fits: G1 Outlanders 400 500 650 800 Replaces OEM: 706200444 This style of ball joint bolts to the lower control arm. If you are unsure of fitment, please ask! 2006 - 2014 Can-Am Outlander 400 2007 - 2012 Can-Am Outlander 500 2008 - 2012 Can-Am Outlander 650 2006 - 2011 Can-Am Outlander 800 2006 - 2013 Can-Am Outlander Max 400 2007 - 2013 Can-Am Outlander Max 500 2007 - 2012 Can-Am Outlander Max 650 2006 - 2012 Can-Am Outlander Max 800- OUT OF STOCK
SHIPS FREE TO THE LOWER 48 STATES New genuine Can-am rear prop shaft for outlander 1000 xmr. (MAX length minus 1.75”) This is an oem part, we do not cut, phase, balance or otherwise modify this shaft. It will work on 2012-14 Outlander 1000 MAX ATV's with the XMR rear differential also. 20 Spline Gearbox Yoke 20 Spline Differential Yoke Current Part number: 703500989 Previous Part number: 703500859, 705501720, 703500927 
NEW AFTERMARKET STARTER SPRAG VTWIN Starter Clutch One Way Bearing for Can-Am Will come as pictured Replaces OE Part Numbers:420659112 420659111 420659261 420659263 420659260
Six Weights 12 gram each for CVtech Trailbloc Primary Part numbers: 0935-2004 0901-7104
NEW Genuine OEM Coolant Temperature Sensor This screws into the cylinder head Part Number 278002895- OUT OF STOCK
OEM CANAM BRP Exhuast Muffler Clamp Part Number 293650177 Fits 2.25" OD pipe 
Wind deflector mounting kit with hardware. Fits Outlander Renegade & DS450. For use with OEM wind deflectors This is just the mounting kit. Part number 715001378 No wind deflectors included.
Can-am Outer CVT Cover, belt box. This is the updated 13 bolt cover. Works with 7 or 13 bolt inner covers. This will fit on any 2006-current v twin ATV, Renegade or Outlander, 500 650 800 or 1000. If you have a a stud with a nut retaining your primary clutch this cover does not have the depth needed. Many 1000R machines use a stud/nut in place of the bolt. Unsure on fitment, please ask! This will keep the water out! 13 Cover bolt holes Current Part number is: 420611397 Replaces: 420611395, 420611390, 420611391, 420611393
Brand New Genuine OEM ignition key switch for Outlander G1 or Renegade G1 Does not require BUDS tuning to swap out, your current DESS key will turn in this. The ignition switch is just a reader of the coded key. Key sold separately. Old Part Numbers 710000728 and 710001421
SHIPS FREE TO THE LOWER 48 STATES Late G1 Early G2 Standard Rear Differential Bearing and Seal Kit High quality aftermarket bearings along with double lip axle seals. Bearing and Seal Brands include: Nachi, KOYO, NTN, Timken The large case sealing and pinion gear O-rings are NOT included as a cost saving measure, these O-rings are reusable if not damaged. There are a few options for kits, please verify your differential uses this style of gears before ordering! This will only fit six mounting hole differentials. Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement. Measure your outer diameter of your axle seals! They should measure close to 1 3/4" (47mm) To further verify fitment you can measure your pinion pilot shaft, this should be 9/16″ (14mm) The last pictures show this very clearly. Please take the time to measure your parts before buying this will save time and restocking fees.
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.