- New OEM Canam CVT Air Intake pre-filter Fits 2013+ Outlander G2 with the round CVT intake duct inlet. Part # 715003483 Adds extra protection to your engine in harsh riding conditions. Filter blocks particles larger than 0.007" (0.19 mm). Easy, tool-less installation. Necessary to maintain vehicle warranty when tracks are installed. Standard on Outlander 650 X mr, 850, 1000, 1000R engines & G2L PRO. Not compatible with Snorkel kits
- Rugged wheels spacers are made from T6061 aluminum alloy and are precisely CNC machined for accurate dimensions. Spacers can be direct bolt on and can use OEM studs. If you are looking to widen the stance of your machine, clear larger tires or get some new wheels. These spacers are just what you need. These spacers are sold as a pair. 1.5 inch thick The bolt pattern is 4x137mm M10 studs Part number PAWS-1036
- Rugged wheels spacers are made from T6061 aluminum alloy and are precisely CNC machined for accurate dimensions. Spacers can be direct bolt on and can use OEM studs. If you are looking to widen the stance of your machine, clear larger tires or get some new wheels. These spacers are just what you need. These spacers are sold as a pair. Two inch thick The bolt pattern is 4x137mm M10 studs Part number PAWS-1037
- New Demon Heavy Duty Axle Front Left Fits: G1 ATV Outlander/Renegade 500 650 800HO 800R Part number PAXL-1128HD Replaces OEM 705400293 705400480 705400510 705400659 705400934 705401109 705401578 Through years of research and development Demon Powersports has developed an axle that doesn’t burn a hole in your pocket and adheres to the highest quality standards. These axles are bigger, beefier, and stronger. Demon Heavy Duty Axles are built using larger CV joints and shafts, paired with our proprietary dual heat treatment process, and 4340 Chromoly Steel inner CV cage gives these the axles the edge it needs for superior strength and longevity. These axles also utilize a unique double plunge design which allows it to achieve higher articulation angles approximately, the axles are designed to slide on the bar splines allowing for 1.5 inches of travel and 40° articulation over terrain on the inboard joint. The outboard joint can travel 0.5inches and swing from 45°-47° depending on the model. The Demon heavy duty axles are equipped The TPEE (Thermoplastic polyester elastomer) boots which are stronger, stiffer, more fatigue resistant, puncture resistant, and more temperature resistant than a standard OEM boot. Axles use molybdenum grease to provide low friction and smooth motion. Trust in Demon Heavy Duty Axles to keep you riding!! • 15%-20% increase in diameter compared to regular axle • Inner cage made up of 4340 chromoly steel • Dual heat treated high strength chromoly steel shaft • Thermoplastic polyester elastomer (TPEE) Boot • 10%-15% increase in CV joint size compared to regular joints • Wider articulation angles • Dual plunge design prevents axle from binding • Packed with high load molybdenum grease Precision CNC machined • Can Fit 1.5”- 5” Bracket lift of particular brands/ All Portal Gear Lifts / 1.5”- 5” A-arms of particular brands • 1-year ltd warranty
- Rugged wheels spacers are made from T6061 aluminum alloy and are precisely CNC machined for accurate dimensions. Spacers can be direct bolt on and can use OEM studs. If you are looking to widen the stance of your machine, clear larger tires or get some new wheels. These spacers are just what you need. These spacers are sold as a pair. One inch thick The bolt pattern is 4x137mm M10 studs Part number PAWS-1035
- Dash/Speedometer for specific G2 500/650/800/1000R bikes. Please ask to confirm fitment if you are unsure, there are a few dashes that look the same. This is the factory Gauge/Screen for some 2018-20 G2 models. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. It will display 0 miles, please record your current miles for your records. Current Part Number 710005599
- OUT OF STOCKBrand New OEM Can Am 2021+ iTC (Intelligent Throttle Control) Outlander Renegade throttle-by-wire and 4x4 Switch Housing This is for models with with Visco-4Lok (electronically locking front differentials) Part Number 707003185 replaces 707002957 707002626
- MOOSE RACING HARD-PARTS Tie-Rod Upgrade Kit 0430-0673 Fits G1 ATV 2006-2012 Will not fit G2 800R 2012 models, if you have fitment questions please ask. Replaces oem numbers 709400485 709400487 709402303 709400486 This kit upgrades your 10mm factory tie rods to 12mm LH and RH threaded rod for on machine adjustments Sold as a pair
- OUT OF STOCKAll Balls complete fuel pump module, retaining nut and gasket This fits G1 Models: 2009-2015 EFI Outlander 400 2009-2012 Outlander or Renegade 500 2009-2012 Outlander 650 2009-2011 Outlander 800R 2012 Outlander 800R XMR 2012 Outlander 800R MAX 2009-2011 Renegade 800R Part number: 47-1049 24-71022 Replaces OEM numbers: 703500766 703500781 709000194 709000245
- NEW MOTUL 10W-40 Oil Change Kit 105938. Technosynthese – Ester lubricant developed for the latest generation of ATV / UTV used for recreational or utility activities. High temperature resistance, meets or exceeds requirements for API SM, SL, and SJ standards. Technosynthese is an ingenious combination of synthetic and high quality mineral base stocks for optimal performance and price competitiveness. Kit Includes: Three Liters of MOTUL 10W-40 Oil K&N Oil Filter KN-152 replaces OEM 420256188 711256188 Filter cover O ring Both sizes of drain plug crush washers
- CAN AM OEM AIR OUTLET OUTLANDER 800 707000870 Fits All G1 Vtwin ATVS this tube is a great way to snorkel your atv this adapts the rear oval to a round tube up near the front cylinder. Please understand 2012 800 Outlanders are G2 and 2012 Outlander Max 800 are G1 If you are unsure on fitment, please ask us!