Electronics

  • New Can Am spark plug boot connector part number 420265020 Will only work with spark plug style that is pictured Easy to replace. Just unscrew your old one and screw on your new one. Fits: 2013-2018 Maverick 1000R Turbo or Non Turbo 2018-2020 Commander 1000R 2016-2020 Outlander or Renegade 850/1000R 2015+ Outlander 450
  • NGK 4339 DCPR8E Standard Plug Fits All G1 ATV's OE numbers: 707000246 715900637 Thread Size: 12mm Thread Pitch: 1.25mm Seat Type: Gasket Resistor Value: 5K Ohm Reach: 19mm (3/4") Hex Size: 5/8" (16mm) Terminal Type: Removable Nut (you will need to remove this for use on G1 ATV's) Gap: .028" (0.7mm) Torque Specs Aluminum: 10.8-14.5 lb. ft. Brand: NGK Heat Range: 8 Longevity: 30k Miles Resistor: Yes Projected Material: Nickel Quantity: 1
  • New short wiring harness for rear tail lights Will need to be wired in to work. This plugs in to Tail light part number 710001645 Fits: G2 ATV's with dual tail lights, Commanders, and Mavericks (non X3/Sport/Trail)
  • NEW AFTERMARKET STARTER VTWIN Will come as pictured Part Numbers: 420684560 420684562 420684568 420684566
  • New NGK Spark Plug 93444

    OEM part number 715900352

    NGK part number LMAR8D-J

    These spark plugs work in 2015+ Outlander/Renegade 450 850 and 1000R also fits Defender HD5

    Shell

    Thread Diameter: 10mm
    Thread Pitch: 1.0mm
    Seat Type: Gasket
    Reach: 26.5mm (1.04″)
    Hex Size: 9/16″ (14mm)
    Terminal Type: Solid
    Gap: .031″ (0.8mm)

    Center Electrode

    Material: Nickel
    Type: Standard
    Size: 2.5mm
    Projection: Projected

    Ground Electrode

    Material: Nickel
    Type: Multi-Ground

    Specifications

    Resistor: Yes
    Resistor Value: 5k Ohm
    Heat Range: 8
    Torque Specs: Aluminum: 7.2-8.7 lb. ft.

     

     

  • OUT OF STOCK
    SHIPS FREE TO THE LOWER 48 STATES Dash swap kit for G2 2012-17 Can-Am ATV’s. WILL NOT FUNCTION 100% on the L models 400/450/500/570 Please note some 2012-13 models may show "dps overheat" This is the factory gauge from the XT-P models. Dual Analog Style read outs. This has the built in coolant temperature gauge, a must for riding in extreme conditions! Brand new dash with 0 miles the Engine hours stay with the ecu, be sure to record your miles for your own records. Dash is set from the factory in KM/H and will require BUDS programming to change it to MPH  This can be done at your local dealer or we offer this free of charge with purchase if you would like to stop by or you can send us your ecu, dash, key and DPS (power steering) if factory equipped. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. Part Number: 710005075 705006322
  • New Genuine OEM IACV idle air control valve bypass, this is what controls the idle speed of your ATV. Will fit on most any Vtwin 2006-current Can Am Outlander Renegade models. Will not fit 850 or 1000R engines with the 54mm throttle body. Old part numbers 420665940 420963055 420963057 Current part number 420665941
  • Dash/Speedometer for 2008-2012 Outlander  500 650 and 800 MAX or STD . This is the factory Gauge.

    The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. Contact for more information.

    It will display 0 miles, please record your current miles for your records.

    If you are looking for a dash (715900042) for your 06-07 V twin Outlander, this will retro fit. Click here for the guide on the Analog To Digi Dash Repin

    Current part number: 710003100
    Replaces part numbers: 710001472 710001527 710001978 710001985 710002178 710002474 710001068

  • Magnetic button to cycle through displays on your dash/speedometer Please compare this to your original button Part number 710001473 replaces 710001417 
  • Brand New Genuine OEM Start/Stop Switch

    Will come as pictured

    Works on many V-twin ATV’s Renegades and Outlanders

    Will not work on 400’s

    Please look at the plug style on your current switch. The buttons may be arranged differently than the switch you are replacing.

    We have found this switch will work on all V-twins DPS or non DPS 2006 to 2015

    Current Part number: 703500920 Replaces: 710003062 710002883 710003039 710004041

  • 30amp five pin relay OE supplier Song Chuan Replaces OE numbers 278002822 278002168 710001334 515176774  710000739 515176774
  • New Genuine OEM

    Fits on: 2017-2019 Outlander and Renegades
    2020 Outlander 650 STD DPS XT XMR
    2020 Outlander 6×6 650 or 1000
    2020 Renegade 570 XMR

    3 position headlight switch OFF/Low/High beam

    Part number 710008837 replaces 710005070

    Will come as pictured

Title