-
Cast aluminum valve cover set with stainless bolts. Pictures of these installed on an engine for reference only. Gaskets are not included. P/N 420630260 is the gasket needed QTY 2 Replaces your factory plastic valve covers on most any G1/G2 2006+ SOHC can-am V-twin ATV or UTV 500/570/650/800/850/1000/1000R If you have aftermarket camshafts you may need to clearance the cover with a dremel. Replaces OE Numbers: 420610390 420610394 420610393 420610395 420630265 420630260 -
Brand new generator stator
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials
Highest grade copper windings, resistant to 200 degrees Celsius.
Connector included
Rubber grommet includedReplaces OEM numbers: 420685632 420685631 420685630
This stator is used on many NOT ALL 2010-2021 Can-Am Maverick, Commander, Outlander, and Renegade models. If you are unsure of fitment please reach out, we are here to help!
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
This stator plugs directly into the voltage regulator unlike 2010-2011 ATV models this will correct the burnt connection issue the early DPS machines experienced.
Dimensions :
Interior diameter : 42 mm
Exterior diameter : 115 mm
Thickness : 24 mm
Length of wires stator to grommet : 150 mm
Length of wires grommet to plug : 1470 mmOther specifications :
Number of wires : 3
Number of plugs : 1
Number of pins : 3
Number of poles : 18
Wire to wire resistance :
Alternator : Yellow to Yellow = 0.4 ohms +/-20% -
NEW OEM Speedometer Display Part number 710007407 This is used on a range of 2021-23 Defender, Commander, Maverick, Renegade and Outlander models. Please reach out to us if you are unsure on fitment! Your machine will likely need to be paired with this display, this is done with BUDS software. -
NEW OEM Primary Clutch Puller. 529000064 Fits: Can-Am 1000 Defender 2016+ HD8 DH10 Maverick Trail 2018+ 1000 Maverick Sport (all) 2018+ Maverick X3 (all models) 2017+ Will not fit machines with M12 primary bolts -
MOOSE UTILITY Shifter Cable Part Number 0652-2425 Replaces OEM number 707002000 Heavy-duty stainless steel end fittings at both ends for corrosion resistance and longevity Roughly 60 inches long from end to end Fits: Two passenger 2018+ Maverick Trail Sport 800 1000 1000R and 2021+ Commander 1000R -
Full rear mesh screen reduces windshield backdraft for added cabin comfort. Installs quick and easily on roll cage. Large Can-Am branding. Part Number 715003664
-
New OEM 18 spline end yoke Part number 715900401 This end yoke slips on to the engine through shaft making it the rear most end yoke on the driveshaft. -
New All Balls Racing fuel sending unit. Part numbers: 47-1027 1009-0128 Will ship as pictured, sending unit, pump, cap and gasket. Replaces part numbers: 709000836 709001056 Found on: Maverick X3 Maverick Sport Maverick Trail If you have fitment questions please let us know, we are here to help. -
New Genuine OEM Robust injected-polypropylene construction allows for right fit and easy installation. Adjustable unit safely holds most tablets and smartphones measuring between 5.1″ (13 cm) and 10″ (25.4 cm) (with protective case). Perfectly complements the Wet Sounds audio systems or Rugged Radios Intercom System to play music with your device. Allows the installation of Garmin Montana 680T GPS. Integrated storage (2.5 Gal (9.5 L) capacity) with access to the dash 12V outlet for device charging. Integrated mounting location for RAM mounts. Not compatible with Defrost, heat and ventilation system (715003678). Part number 715005212
-
Brand New Genuine OEM XPS Full Synthetic Oil Change Kit. Ultra convenient “all in one” kit saves time and money. Oil Grade 5W-40 This XPS oil provides superior engine and transmission protection against heat, rust and corrosion. Ambient temperature operating range: -31°F / 104°F (-35°C / 40°C). For Can-am off road vehicles with the 650cc Rotax DOHC (Dual Over Head Cam) ACE single cylinder liquid cooled engine, marketed as "700" or "HD7" This fits: 2023+ Outlander 500/700 2023+ Outlander PRO HD5/HD7 2022+ Commander 700 2022+ Defender HD7 2022+ Maverick Trail 700 Excludes SOHC (Single Over Head Cam) Traxter and Quest HD5 Defender 2021 or older. If you have fitment questions please reach out! Includes two quarts and one 16oz bottle of 4T synthetic oil, o-rings, rotax oil filter, and drain plug crush washer. May not ship in original box Part Number: 9779480 for the kit 420256188 oil filter 420230922 housing o ring 420552280 crush washer 9779492 is the oil in quart size retail packaging these are bulk XPS jugs. -
NEW OEM BRP trim button Part number 420651816 -
NEW OEM Idle Gear Oil Seal Part number 420430555
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
canampartsguy@gmail.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.