Engine and Components

  • Brand new OEM can am flywheel or magneto puller. This includes the puller itself and the piece to protect the crank. This will work on the 330, 400, 450, 500, 570, 650, 800, 850, and 1000 Part Number: 529035748 & 529036034
  • Brand New Genuine OEM XPS Full Synthetic Oil Change Kit. Ultra convenient “all in one” kit saves time and money. For Can-am off road vehicles with 500cc or larger Rotax engines. Excludes Traxter and Quest. Not compatible with Maverick X3 Includes 2 quarts plus 1 16 fl oz of 4T synthetic oil 0W40, 0-rings, rotax oil filter, and copper washer for old style and new style drain plugs. May not ship in original box Part Number: 779259
  • 800/1000 Top end Gasket set Includes: 2 Head Gaskets 2 Cylinder Base Gaskets 2 Valve Cover Gaskets 2 Exhaust port crush gaskets 2 Intake Manifold Seals 8 valve seals Various O rings for fuel injectors, coolant fittings etc.. Moose gaskets are made to the same high quality standards as OEM. Part number 0934-3017
  • Brand New Genuine OEM Shifting cable for two passenger Canam Mavericks  and Commanders WILL NOT FIT Maverick Trail/Sport or X3 WILL NOT FIT Four Seat Models Comes as pictured OEM part number 707000775
  • New OEM Shifting Cable For 2014-2015 Commander Max and Maverick Max. Part Number 707001348. 83 Inches From Bolt To Bolt.
  • New OEM Engine Case Half Gasket. Fits most G2 Can-Am V-Twin Engines. This is for the longer stroke (75mm) cases. Old Part Number: 420651225 New Part Number: 420651227
  • Brand New OEM Stator Cover Gasket for V-Twin Engines. Fits 2006-Current V twin’s Part number 420651201

  • Brand New OEM PTO Cover Gasket for V-Twin Engines Part number 420651211
  • SHIPS FREE TO THE LOWER 48 STATES NEW OEM Canam Cam Chain and Guide Set  for V Twin 1000 Order QTY 1 (one) per engine. Kit includes: 2 Silent Chains 420297068 2 Pivot Guides 420436017 2 Fixed Guides 420236583 2 Bottom Guides 420236350 ONLY WORKS WITH 1000 V TWINS To install the timing chain kit you will need to remove the PTO Cover, Stator  Cover, and cylinder heads. We sell the gaskets and pullers required to do this.  Check our other listings for these products
  • NEW Genuine OEM Coolant Temperature Sensor This screws into the cylinder head Part Number 278002895
  • OEM Rotax Piston Ring Set for 400, 800, and 1000cc engines 91mm bore size Complete kit for one factory piston Part Numbers: 420296774 420685244
  • OUT OF STOCK

    Brand New Genuine OEM XPS Full Synthetic Oil Change Kit.

    Ultra convenient “all in one” kit saves time and money.

    For Can-am off road vehicles with 500cc or larger Rotax engines. Excludes Traxter and Quest.

    Not compatible with Maverick X3

    Includes 2 quarts plus 1 16 fl oz of 4T synthetic oil 5W40, 0-rings, rotax oil filter, and copper washer for old style and new style drain plugs.

    May not ship in original box

    Part Number: 779258 replaced by 9779488

  • NEW OEM Can-am Output Crank Shaft Seal This is the engine out put shaft seal, pressed into the crankcase PTO cover 34mm Inner Diameter 52mm Outer Diameter 8mm Thick Current Part Number 420631933 Replaces Part Number 420631932
  • SHIPS FREE TO THE LOWER 48 STATES! Can-am NEW OEM Main bearing set. Kit includes: Main Bearing Half with Oil hole 420233965 x2 Main Bearing Half without Oil hole 420233960 x2 PTO Cover Bearing 420233995 Be sure to mark your cases before pressing them out! The oil holes need to be lined up!
  • BOYESEN SUPERCOOLER WATER PUMP Cover and Impeller Kit Increased coolant flow at all rpm ranges Patented Nautilus-style impeller for hydrodynamic efficiency Color/Finish: Black, Powder-Coated Material: Aluminum Model: Supercooler Part number 0932-0166 WPK-80B Replaces OEM 420222505 420222785 703501124 This is the style with the smaller output nipple roughly 7/8 inch in outer diameter.
  • OEM Rotax Cylinder Base gasket Fits many Canam ATV’s/UTV’s 330 400 500 650 800 1000 Unsure on fitment? Please ask! Part number 420630210
  • Connecting Rod Bolt for 1000 V twin Engines This is the OEM bolt with a size of M9x1x45 Part number 420641477 420641475
  • NEW Can Am OEM Cam Timing Tool For holding the cam in place for timing and tightening camshaft sprocket bolts For easy installation of new timing chains or just setting timing. OEM Number 529036268 replaces 529036231
  • Cast Aluminum Valve cover set with Stainless bolts. Replaces your factory plastic valve covers on any can-am V-twin ATV or UTV 500/570/650/800/850/1000/1000R Replaces OE Numbers: 420610390 420610394 420610393 420610395
  • This model type is a rubber O.D. seal with two sealing lips. The main sealing lip is spring loaded. This is a two-way seal, which means that it can retain lubricant and exclude contaminants simultaneously Canam Vtwin crankshaft main seal. Replaces OEM number 420631933 This seal is pressed into the PTO cover on v-twin's Unsure on fitment? Just measure you seal. 52mm Outer Diameter 34mm Inner Diameter 8mm Thick
  • Single forged piston kit with rings, pin and clips,  order two per engine

    1000R Maverick  this is a +1mm bore of the oem 420686094 piston allowing you to re use your factory cylinders with a fresh bore from your local machine shop

    This takes your 976 cc 1000R engine to 997 cc

    Factory head gaskets work just fine with these pistons no need for special made gaskets

    Forged pistons compared to cast pistons, forgings are tougher and more durable, and will stand up to the abuse that high performance motorsport applications require. Most castings are brittle, have no grain structure and tend to fail catastrophically when the material yield strength is exceeded. Forgings have condensed grain that is aligned to the features of the part, which produces higher mechanical properties, and resistance to impact and fatigue. Each forging is designed to optimize the strength-to-weight ratio, and maximize performance.

    12:1 CR (Compression Ratio) same as factory

    The piston skirts feature ArmorGlide™ Coating this is the ultimate in skirt coating toughness, lubrication, and bond technology working together to minimize friction, maximize horsepower, and provide improved wear resistance.

  • New NGK Spark Plug

    OEM part number 715900357

    NGK part number LMAR9D-J

    These spark plugs work in 2015-2017 Maverick TURBO machines only (will not work in the X3)

    Shell
    Thread Size: 10mm
    Thread Pitch: 1.0mm
    Seat Type: Gasket
    Resistor Value: 5K Ohm
    Reach: 26.5mm (1.04″)
    Hex Size: 9/16″ (14mm)
    Terminal Type: Solid
    Overall Height: ISO
    Gap: .031″ (0.8mm)

    Center Electrode
    Material: Nickel
    Type: Standard
    Size: 2.5mm
    Projection: Projected

    Ground Electrode
    Material: Nickel
    Type: Multi-Ground

     

     

  • Used- Good Condition, some slight surface rust OEM Intake Manifold Support Part Number: 420651521 Fits 2011-2020 Commander and 2013-2018 Maverick Comes as Pictured
  • Replaces OEM part number 420222691 Upgrade your plastic thermostat housings/water neck on your vtwin 500/570/650/800/850/1000 SOLD AS PAIR These will work in Commanders, Mavericks, Outlanders & Renegades