OEM Canam Insert, this holds cab interior panels together in your maverick or commander. Part Numbers: 707900133 503189273
Can-am Style Plastic Fender rivet set. NEW Pack of 25 For 8mm (5/16?) holes great for holding plastic fenders together, works on Maverick, Commander, Outlander and Renegade Replaces part numbers 293150089 293150230
Single CVT cover bolt with the hex head and torx inside. The preferred style to work with. Part number 420440568 replaces 420440567 420440307 Genuine OEM Part A little anti-seize is a great idea when installing these bolts, as the inserts they screw into can easily strip out.
One CVT cover screw with the Torx head. M6 X 30.5 Stainless Part # 420440561
Seat Rubber Bumper. This is the part that isolates the seat from the frame. Simply pops into the seat frame. OLD part number 708000899 NEW part number 708001671
OEM Can Am washer for plastic insert 707900133 This is ONLY for the washer Insert is NOT included (only pictured for reference) Part Number: 503189273
Set of 13 CVT cover screws with the Torx heads. Stainless less likely to rust and strip out inserts. Comes as a set of 13 Part number 420440561 Interchanges with 420440568 420440567
NEW OEM O-rings and hex bolts to install inner CVT cover on most Can-Am V-twins. Works on 7 and 13 bolt inner covers Part numbers: O-rings - 420430407 and 420631087 old numbers 420430408 420631088 Hex Bolts - 420440207 Also has a nut and washer for 1000 cover installation - 232561434, 224061121 Will come as pictured- OUT OF STOCK
Outer CVT cover for Turbo V twin Mavericks 1000R Best to pull your cover and visually inspect it for fitment. This cover has two holes over the primary clutch and one on the secondary. If you are unsure on fitment, please contact us! Fits: 2015-2018 Maverick 1000R Turbo 2017-2018 Maverick 1000R XMR Will not fit Maverick X3 Part number 420212285 replaces 420212282 
Canam CVT Cover Kit Commander/Maverick 1000R
Please look at pictures to verify fitment.
This outer cover has two breather holes, one in front of the primary, one on the secondary.
This outer cover is the factory replacement for 420612319, some aftermarket clutches will not clear the new breather hole style you may need to modify this cover or backdate it to the 420612313 style with out the secondary breather.
Please look at pictures to verify fitment.
Fits:
Commander 1000R two seat 2018-2020
Commander 1000R MAX four seat 2018
Maverick 1000R two seat 2014-2018
Maverick 1000R MAX four seat 2014-2018Will not fit:
2015-2018 Maverick 1000R Turbo
2017-2018 Maverick 1000R XMRInner cover 420612304
Outer cover 420212286
13 Hex head CVT housing bolts 420440568
Gasket 420430126
O-rings – 420430407 and 420631087
Hex Bolts – 420440207
Also has a nut and washer – 232561434, 224061121
Nylon drain plug and clamp
Brand New Moose Utility 13 Bolt CVT Cover Gasket
Works on 7 bolt covers also.
Part number 0935-1193
replaces: 420430127 420430126 420430124 420430123 420430120
- OUT OF STOCK
CVT cover set for Turbo V twin Mavericks 1000R Best to pull your cover and visually inspect it for fitment. This cover has two holes over the primary clutch and one over the secondary. If you are unsure on fitment, please contact us! Fits: 2015-2018 Maverick 1000R Turbo 2017-2018 Maverick 1000R XMR Will not fit Maverick X3 Comes with: Maverick Turbo covers inner and outer. CVT Cover Gasket CVT plug PTO O-ring Gear box O-ring Inner CVT Bolts/Nut 13 Cover screws Part numbers 420212285 420611407 420440568 
SHIPS FREE TO THE LOWER 48 STATES OEM Outer CVT Cover 2013 Maverick 1000R ONE Breather hole in front of Primary clutch. This is the cover with the most room. Common to use this on newer Vtwin Mavericks with aftermarket clutches that do not require the extra breathers. Current Part Number: 420612313 replaces 420612312 Will not fit Maverick X3/Sport/Trail- OUT OF STOCK
Brand New Genuine OEM BRP logo sticker 20mm diameter Part number 516006224 replaces 219902677 704904616 
Impact-absorbing rubber prevents bottoming-out of winch Prevents hook rattling when not in use A must-have for preventing damage to your winch fairlead Made in the U.S.A. 2 1/2″ Diameter 1 3/4″ Thick Part number 4505-0475
Seat Bottom Fits Commanders, and Mavericks. 800 or 1000 Will not work on Maverick X3/Sport/Trail Current part number 703500943 Replaces part numbers: 708001085 708001102 708001318
Allows the installation of accessories with 16” base on LinQ racks. Tool-less installation and removal. Part number 715004960
MOOSE UTILITY Shifter Cable Part Number 0652-2421 Replaces OEM number 707001210 Heavy-duty stainless steel end fittings at both ends for corrosion resistance and longevity Roughly 53 inches long from end to end Fits two seat models: 2016-2020 Commander 800R 2016-2020 Commander 1000/1000R 2016-2018 Maverick 1000R
NEW SEIZMIK STRIKE Side mirror set
Both drivers and passengers side mirrors
Fits 2.0″ Round Roll Cages or the 1.875″ Round Roll Cages with the supplied rubber shims
Features: Adaptive 360 Bracket Rotation: Will accommodate any angle roll cage pillar & provide optimal viewing position, so you can mount it high or low and adjust to perfect position every time
Full Breakaway Geometry: Designed to break away during impacts to prevent damage
Convex mirrors more than double your field of rear view
High-Impact ABS Plastic Housing: Resists damage
Ball Socket Joint: Provides a broad range of viewing angles
Heavy-Duty Steel Mounting Clamp: Low mass design provides maximum strength and durability
Convex Mirror Surface: provides wider viewing ranger and image stabilization
Shatter Resistant Safety Glass Position Tension Adjustment Bolt: Always be able to keep it tight as newUNLIMITED LIFETIME WARRANTY
CANAM Cage Styles
Defender: Pro Fit Cage
Maverick Trail/Sport: Pro Fit Cage
OG Maverick/Commander: Round 2.0”Part number 18092
MOOSE UTILITY Shifter Cable Part Number 0652-2894 Replaces OEM number 707000775 Heavy-duty stainless steel end fittings at both ends for corrosion resistance and longevity Roughly 53 inches long from end to end Fits two seat models: 2011-15 Commander 800R/1000 2013-15 Maverick 1000R- OUT OF STOCK
New Genuine OEM Convex mirror for wide angle visibility Can be used with or without roof and windshields 2013-2018 Maverick 2011-2020 Commander Part number 715000956 Install with in minutes 
MOOSE UTILITY Shifter Cable Part Number 0652-2422 Replaces OEM number 707001283 Heavy-duty stainless steel end fittings at both ends for corrosion resistance and longevity Roughly 83 inches long from end to end Fits Four seat MAX models: 2016-2020 Commander MAX 800R 2016-2020 Commander MAX 1000/1000R 2016-2018 Maverick MAX 1000R
For use with WIDE size winches with a 6.60" bolt up pattern. Mounting hardware included. Replaces standard winch fairlead during plow season. Provides larger 2-1/8” diameter roller for smoother cable movement when plowing compared to standard 7/8” rollers. Roller has a curved cable groove to help eliminate cable flattening that leads to snapped cables during the plowing season. Eliminates potential cable kink due to small roller contact and abrupt angle rolls. Multiple roller positions for different applications and cable angles. For Steel Cable use only. WIDE Bolt pattern is UTV standard 6.00". Part number 105465
NEW KFI Products Tiger Tail Tow System With 2 Inch Universal Receiver. Tow Rope Part Number 101120 And Receiver Part Number 101110. ATV and UTV retractable tow rope with a retractable design allowing for quick, easy, clean use for towing or as an anchor-line during poor underfoot winch operations Superior to a tow strap and wicked fast deployment 12' of 12,000 lb average breaking strength rope with wear resistant coating Self locking hook storage 3/16” grade 50 steel construction Fully sealed and lubricated mechanism tested to 14,000+ cycles Shot blasted and powder coated black for supreme durability Convenient operation and easy to use Quality built and dependable performance Rugged design for the toughest environments – no electrical parts to burn up Constant tension Keeps your gear clean – no more dirty tow straps to carry 100% serviceable components Made in USA
SHIPS FREE TO THE LOWER 48 STATES Seat Bottom Fits Commanders, and Mavericks. 800 or 1000 Will not work on Maverick X3/Sport/Trail Part number 703500945 Replaces 708001316
This is an OEM adapter boot for the CVT system This attaches to the outer cover. Part number 707001229 Fits: 2013-2018 Non turbo OG 1000R Mavericks and some commanders please contact us if you have fitment questions.
Used- Good Condition Lower Firewall grill fits: Maverick & Commander 2013-2016 Product Number: 707900180- OUT OF STOCK
Canam Maverick Outer CVT Cover 1000R Heat Protection Mat. New OEM. Will come as pictured. Current Part number: 715900313. Replaces: 420975053. 
Ravek UTV Universal Sunglasses Holder. It’s mountable on ANY flat surface or 1.25”-2” roll bars with an ultra-durable semi-rigid, EVA molded structure. RAVEK’s magnetic closure means you won’t fight clogged zippers and can access your shades with a single hand. Install in 2 minutes to dozens of locations using fastening straps or 3M heavy-duty adhesive. Technical Specifications 7 3/8" Long, 3 3/8" Wide, 2 7/8" High Designed to Work With Standard And Safety Glasses Compatible With Up To 2" Roll Bar Adhesion Pad Included For Surface Mounting Magnetic Closure Easy To Clean Waterproof Design And Materials Keeps Out Dust And Particles Designed For One Hand Operation
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.