Maverick OG 2013-2018

  • OUT OF STOCK
    Brand New Moose Utility left or right rear axle Will fit CAN AM Maverick 1000 2013-2015 Low profile stainless steel clamps Engineered in the USA Part Number: 0214-1145 Replaces OE Number: 705501948 705502356
  • Used-Good Condition OEM Can-Am Commander and maverick brake pedal in great working order Product Number: 705600724

    Will work on all Commanders and Mavericks

  • Used OEM Steering wheel support and steering shaft Good condition, a slight chip on the steering shaft plastic insert, shouldn't affect operation Comes as pictured Part Number: 709401167 and 709401391
  • Used- Good Condition, some slight surface rust OEM Intake Manifold Support Part Number: 420651521 Fits 2011-2020 Commander and 2013-2018 Maverick Comes as Pictured
  • Used- Like New OEM 2014-2015 Maverick 1000, ECM Part Number: 420264800 Updated Part Number: 420264802 Comes as Pictured  
  • Used- Good Condition OEM Can-Am Grab Handle for Commander & Maverick Product Number: 705203332 Comes as Pictured
  • NEW GENUINE OEM part Part number 705600678 Includes: 715500333 715500383 705600080 715500336 715500337 This is the passenger side front caliper right hand side Fits two seat models: 2011 Commander 800 2012-2020 Commander 800R 2011-2017 Commander 1000 2013-2015 Maverick 1000R STD XRS XXC 2016-2018 Maverick 1000R STD DPS XC XXC WILL NOT FIT TURBO, XMR, OR MAX MODELS
  • OUT OF STOCK
    Canam Maverick Outer CVT Cover 1000R Heat Protection Mat. New OEM. Will come as pictured. Current Part number: 715900313. Replaces: 420975053.
  • Used- Good Condition Lower Firewall grill fits: Maverick & Commander 2013-2016 Product Number: 707900180
  • New Genuine OEM part Will work on 2014 or 2015 Commanders or Mavericks Part Number: 709401296 Will come as pictured
  • NEW OEM Idle Gear Oil Seal Part number 420430555
  • OUT OF STOCK
    SHIPS FREE TO THE LOWER 48 STATES Rear Differential Rebuild Kit for 2013-2018 "OG" Maverick 1000R/Turbo Rear Differentials. Will not fit X3 Trail or Sport Mavericks. You will need to shim this to your cases like any other gear set. Factory BRP: gears, roller bearings, pinion seal, washer and shims. IKO needle bearing, SKF or Timken axle seals, aftermarket driveshaft bolt. Replaces oem 703500840 703500869 703500867 703500868 703500837 705502275 705501556
  • NEW OEM Canam PPS Sport Mode Switch Part number 710002199 Fits: 2011-2013 Commander 1000 and 800R 2013 Maverick 1000R Amber backlight
  • NEW EBC Brake Rotor UTVX6370 Heat-treated carbon steel brake rotors Steel construction extends rotor and brake pad life by eliminating galling These rotors look great and are self cleaning whilst improving brake performance Made from durable and tough heat treated stainless steel in the British manufacturing facility using premium German mill-rolled steel, heat treated and then diamond ground to deliver great braking Replaces OEM part numbers 705600999 705601997
  • OUT OF STOCK
    NEW KFI Products Tiger Tail Tow System With 2 Inch Universal Receiver. Tow Rope Part Number 101120 And Receiver Part Number 101110. ATV and UTV retractable tow rope with a retractable design allowing for quick, easy, clean use for towing or as an anchor-line during poor underfoot winch operations Superior to a tow strap and wicked fast deployment 12' of 12,000 lb average breaking strength rope with wear resistant coating Self locking hook storage 3/16” grade 50 steel construction Fully sealed and lubricated mechanism tested to 14,000+ cycles Shot blasted and powder coated black for supreme durability Convenient operation and easy to use Quality built and dependable performance Rugged design for the toughest environments – no electrical parts to burn up Constant tension Keeps your gear clean – no more dirty tow straps to carry 100% serviceable components Made in USA
  • NEW OEM Voltage Regulator Converts AC voltage from the stator to DC voltage used to charge the battery. Part Number 710001191 This is the 650watt version compatible with many ATVs with DPS if you have fitment questions please ask!
  • NEW OEM Can Am Tool M8x1.25 Tapered Bolt Part number 529036098. This tool fills a few roles, used to open the secondary clutch on many models. This will also lock the crankshaft on Vtwin's and three cylinder models. If you are unsure on application please reach out to us, we are here to help!
  • SHIPS FREE TO THE LOWER 48 STATES Seat Bottom Fits Commanders, and Mavericks. 800 or 1000 Will not work on Maverick X3/Sport/Trail Part number 703500945 Replaces 708001316
  • For use with WIDE size winches with a 6.60" bolt up pattern. Mounting hardware included. Replaces standard winch fairlead during plow season. Provides larger 2-1/8” diameter roller for smoother cable movement when plowing compared to standard 7/8” rollers. Roller has a curved cable groove to help eliminate cable flattening that leads to snapped cables during the plowing season. Eliminates potential cable kink due to small roller contact and abrupt angle rolls. Multiple roller positions for different applications and cable angles. For Steel Cable use only. WIDE Bolt pattern is UTV standard 6.00". Part number 105465
  • Left Side (Drivers) Front One Caliper Set Part number: DP412 Replaces OEM # 715500335 Please contact us to confirm fitment if you are unsure. DP Brakes Brake Pads are designed with sintered metal compounds to give your SXS high-tech performance in all conditions Pads have a quick break-in period so you get maximum performance fast DP Brakes design and materials ensure consistent, hard stops and fade-free performance Sintered metal compounds outlast more conventional organic or aramid fiber pads
  • Cam-Am Maverick Rear Differential Pinion Gear Fits 2013-2018 Maverick Turbo or non turbo Will not fit X3/Sport/Trail Models Comes with Pinion and Bearings Part Number: 703500867
  • New Moose fuel pressure regulator for Canam Vtwins. Part number 1009-0114
  • Rugged wheels spacers are made from T6061 aluminum alloy and are precisely CNC machined for accurate dimensions. Spacers can be direct bolt on and can use OEM studs.  If you are looking to widen the stance of your machine, clear larger tires or get some new wheels. These spacers are just what you need. These spacers are sold as a pair. One inch thick The bolt pattern is 4x137mm M10 studs Part number PAWS-1035
  • Right Side (Passenger) Front One Caliper Set Part number: DP411 Replaces OEM # 715500336 Please contact us to confirm fitment if you are unsure. DP Brakes Brake Pads are designed with sintered metal compounds to give your SXS high-tech performance in all conditions Pads have a quick break-in period so you get maximum performance fast DP Brakes design and materials ensure consistent, hard stops and fade-free performance Sintered metal compounds outlast more conventional organic or aramid fiber pads
  • NEW Spanner Wrench This is to remove and install the nut on 703500867 pinion assembly. Use a 20 spline yoke to retain the assembly in a vice and spin the nut off. The nut should be RH threaded
  • New Genuine OEM Convex mirror for wide angle visibility Can be used with or without roof and windshields 2013-2018 Maverick 2011-2020 Commander Part number 715000956 Install with in minutes
  • MOOSE UTILITY Shifter Cable Part Number 0652-2422 Replaces OEM number 707001283 Heavy-duty stainless steel end fittings at both ends for corrosion resistance and longevity Roughly 83 inches long from end to end Fits Four seat MAX models: 2016-2020 Commander MAX 800R 2016-2020 Commander MAX 1000/1000R 2016-2018 Maverick MAX 1000R
  • Fitment: DCP30 Can-Am Drive clutch governor cup puller

    Replaces DPC25OEM 529036350

    2015-18 Maverick 1000R Turbo
    2017+ Maverick X3 Turbo (including P drive)
    2018+ Defender HD8 HD10
    2018+ Maverick Trail 800R 1000 1000R
    2019+ Maverick Sport 800R 1000 1000R
    2020+ Commander 800R 1000R

    Aides in safe disassembly of the drive clutch for servicing.
    Use with Gboost drive clutch puller # TOOL31SD

    GBOOST Instructional Video CLICK HERE

    Features:

    All GBoost® pullers start out with annealed, cold-rolled alloy steel.

    Oil Quenched
    Tempered
    Rockwell hardness between 50-55
    Zinc plated to prevent rust and thread deterioration
    Machined to exact specifications in the U.S.A.
    This results in

    31% higher tensile strength
    19% higher yield strength
    Stronger than any existing OEM pullers

  • Rugged wheels spacers are made from T6061 aluminum alloy and are precisely CNC machined for accurate dimensions. Spacers can be direct bolt on and can use OEM studs.  If you are looking to widen the stance of your machine, clear larger tires or get some new wheels. These spacers are just what you need. These spacers are sold as a pair. Two inch thick The bolt pattern is 4x137mm M10 studs Part number PAWS-1037
  • Rugged wheels spacers are made from T6061 aluminum alloy and are precisely CNC machined for accurate dimensions. Spacers can be direct bolt on and can use OEM studs.  If you are looking to widen the stance of your machine, clear larger tires or get some new wheels. These spacers are just what you need. These spacers are sold as a pair. 1.5 inch thick The bolt pattern is 4x137mm M10 studs Part number PAWS-1036
  • MOOSE UTILITY Shifter Cable Part Number 0652-2894 Replaces OEM number 707000775 Heavy-duty stainless steel end fittings at both ends for corrosion resistance and longevity Roughly 53 inches long from end to end Fits two seat models: 2011-15 Commander 800R/1000 2013-15 Maverick 1000R
  • New Can Am Outlander Renegade and Commander V-Twin EFI Speedo Speedometer Display Dash 2018-2020 Please understand 2017 and older models require a different dash, even if yours looks the same. This is the factory Gauge/Screen. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. Contact for more information. It will display 0 miles, please record your current miles for your records. Current Part number: 710005553
  • Sale!
    Brand New Klotz Full Synthetic Oil Change Kit. Ultra convenient “all in one” kit saves time and money. For Can-am off road vehicles with 500cc or larger Vtwin Rotax engines. Excludes Traxter and Quest. Not compatible with Maverick X3 Includes 3 quarts synthetic oil 10W50, 0-ring , Highflow HF152 oil filter, and copper washer for both old style and new style drain plugs. 10w50 oil, great for hot climates, temperature range -13*F to 122*F Will not ship in original box
  • NEW SEIZMIK STRIKE Side mirror set Both drivers and passengers side mirrors Fits 2.0" Round Roll Cages or the 1.875" Round Roll Cages with the supplied rubber shims Features: Adaptive 360 Bracket Rotation: Will accommodate any angle roll cage pillar & provide optimal viewing position, so you can mount it high or low and adjust to perfect position every time Full Breakaway Geometry: Designed to break away during impacts to prevent damage Convex mirrors more than double your field of rear view High-Impact ABS Plastic Housing: Resists damage Ball Socket Joint: Provides a broad range of viewing angles Heavy-Duty Steel Mounting Clamp: Low mass design provides maximum strength and durability Convex Mirror Surface: provides wider viewing ranger and image stabilization Shatter Resistant Safety Glass Position Tension Adjustment Bolt: Always be able to keep it tight as new UNLIMITED LIFETIME WARRANTY CANAM Cage Styles Defender: Pro Fit Cage Maverick Trail/Sport: Pro Fit Cage OG Maverick/Commander: Round  2.0” Part number 18092
  • Right Side (Passenger) Front One Caliper Set Part number: DP544 Replaces OEM # 705601150 Please contact us to confirm fitment if you are unsure. DP Brakes Brake Pads are designed with sintered metal compounds to give your SXS high-tech performance in all conditions Pads have a quick break-in period so you get maximum performance fast DP Brakes design and materials ensure consistent, hard stops and fade-free performance Sintered metal compounds outlast more conventional organic or aramid fiber pads

Title