-
New Can Am Maverick 1000R Rear Differential Replaces Rear differential in any Maverick/Maverick Turbo (non X3/Sport/Trail) Largest and strongest rear differential found in Can-am’s 10/36 Gear set, that is a 3.60:1 ratio, same since at least 2006 Pinion shaft 20 spline Current Part Number 705502275 Old Part Numbers 705501912 705501958 -
Cast aluminum valve cover set with stainless bolts. Pictures of these installed on an engine for reference only. Gaskets are not included. P/N 420630260 is the gasket needed QTY 2 Replaces your factory plastic valve covers on most any G1/G2 2006+ SOHC can-am V-twin ATV or UTV 500/570/650/800/850/1000/1000R If you have aftermarket camshafts you may need to clearance the cover with a dremel. Replaces OE Numbers: 420610390 420610394 420610393 420610395 420630265 420630260 -
NEW Take Off 3 wire 4x4 Servo Actuator This fits machines that use a sensor on the gearbox to verify 4x4 condition. Fits all G1 vtwins (400's require a fork swap) Fits 2012-18 G2 500/570/650/800R/850/1000/1000R machines. Taken From Machine With 9.5 Miles. Part number 415129174 -
NEW Take Off G2 Can Am Outlander Crankshaft Position Sensor 420966570 Please ask if you have fitment questions, we are here to help! Removed From Machine With 9.5 Miles. -
MOOSE OFFROAD Crankshaft Position Sensor Replaces OEM numbers 420966570 420431580 This fits a wide range of canam's since 2003, please reach out to us if you are unsure of fitment -
300M Demon Xtreme Heavy Duty Race Spec Ball Joint This fits upper arms, on many applications. If you have fitment questions please contact us! 2012-2025 G2/G2L/G3/G3L Outlander 500/570/650/700/800R/850/1000/1000R 2012-2025 G2 Renegade 500/570/650/800R/850/1000/1000R 2013-2018 Maverick 1000R/1000R Turbo 2017-2025 Maverick X3 Turbo/Turbo R/Turbo RR/non turbo 2019-2025 Maverick Sport 1000R 2018- 2025 Maverick Trail 800/1000 2016-2025 Defender HD5 HD7 HD8 HD9 HD10 2011-2025 Commander 700/800R/1000 2024-2025 Maverick R (please note this is installed in the upper, and may affect tire clearance) Demon Part number PABJ-5008XHD Replaces OE part numbers 703501264 706202044 706203084 706202801 706201575 706201394 706201370 This design eliminates the snap ring, opting for a threaded chromoly body for secure ball joint retention. Constructed from 300M stud and dual heat-treated 4340 chromoly steel body and finished with zinc plating. This ball joint is adjustable, rebuildable, and greaseable, maintaining smooth operation for years to come. Warranty for Xtreme Heavy Duty Ball Joint Race Spec Demon Powersports warrants its Demon Xtreme Heavy Duty Ball Joints to the original purchaser for a lifetime period from the date of purchase against manufacturing defects in workmanship and material only. Demon Powersports’ warranty does not apply to failures resulting from misuse, negligence, accidents, improper application, improper installation, alteration, or lack of reasonable or proper maintenance, or if the machine is used in racing or commercial applications. This warranty does not cover normal wear and tear items such as gaskets, seals, boots, bearings, bushings, and rotors. Demon Powersports does not cover the cost of removal and reinstallation of any kind. -
NEW OEM Front Intermediate Driveshaft. Current Part number 705402041 Replaces 705401940 705401495 705401238 This shaft spans from the engine through shaft to the carrier bearing on MAX models. Fits: 2014-2020 Commander MAX 800R/1000/1000R 2014-2018 Maverick MAX 1000R WILL NOT FIT: X3/SPORT/TRAIL Models. -
Brand new generator stator
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials
Highest grade copper windings, resistant to 200 degrees Celsius.
Connector included
Rubber grommet includedReplaces OEM numbers: 420685632 420685631 420685630
This stator is used on many NOT ALL 2010-2021 Can-Am Maverick, Commander, Outlander, and Renegade models. If you are unsure of fitment please reach out, we are here to help!
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
This stator plugs directly into the voltage regulator unlike 2010-2011 ATV models this will correct the burnt connection issue the early DPS machines experienced.
Dimensions :
Interior diameter : 42 mm
Exterior diameter : 115 mm
Thickness : 24 mm
Length of wires stator to grommet : 150 mm
Length of wires grommet to plug : 1470 mmOther specifications :
Number of wires : 3
Number of plugs : 1
Number of pins : 3
Number of poles : 18
Wire to wire resistance :
Alternator : Yellow to Yellow = 0.4 ohms +/-20% -
ROLLER Kit 2 Pack Driven Clutch Upgrade Replaces OEM # 420629211 / 417127016 Made with Fibermaxx2, which is a proprietary EPI material that uses the latest technology to combine a self lubricating polymer with wear resistant fibers. While developing this new material we found that it greatly outlasted the competitors rollers before showing any signs of wear during a 25,000 cycle load test Fitment: 800 HD8 Defender Std / DPS / DPS Cab / XT / XT Cab 2016-21 800 HD8 Defender Max Std / DPS / XT 2016-21 800 Maverick Trail Std / DPS 2018-21 1000 HD10 Defender STD / DPS / XT / XT Cab / XT-P / Hunting 2016-19 1000 HD10 Defender XMR 2018-19 1000 HD10 Defender Max XMR 2019 1000 HD10 Defender Max DPS / XT / XT Cab / Lone Star 2016-19 1000 Maverick Sport Std DPS (75hp) 2019-22 1000 Maverick Trail Std / DPS 2018-24 1000 Maverick Turbo (131hp) 2015-17 1000 Maverick Turbo Max (131hp) 2015-17 1000 Maverick XMR (101hp) 2017-18 1000 Maverick XMR Max (101hp) 2017-18 -
300M Demon Xtreme Heavy Duty Race Spec Ball Joint This fits Lower arms, on many applications. If you have fitment questions please contact us! 2012-2025 G2/G2L/G3/G3L Outlander 500/570/650/700/800R/850/1000/1000R 2012-2025 G2 Renegade 500/570/650/800R/850/1000/1000R 2013-2018 Maverick 1000R/1000R Turbo 2017-2025 Maverick X3 Turbo/Turbo R/Turbo RR/non turbo 2019-2025 Maverick Sport 1000R 2018- 2025 Maverick Trail 800/1000 2016-2025 Defender HD5 HD7 HD8 HD9 HD10 2011-2025 Commander 700/800R/1000 2024-2025 Maverick R (please note this is installed in the upper, and may affect tire clearance) Demon Part number PABJ-5006XHD Replaces OE part numbers 706201393 706201576 and 706202045 This design eliminates the snap ring, opting for a threaded chromoly body for secure ball joint retention. Constructed from 300M stud and dual heat-treated 4340 chromoly steel body and finished with zinc plating. This ball joint is adjustable, rebuildable, and greaseable, maintaining smooth operation for years to come. Warranty for Xtreme Heavy Duty Ball Joint Race Spec Demon Powersports warrants its Demon Xtreme Heavy Duty Ball Joints to the original purchaser for a lifetime period from the date of purchase against manufacturing defects in workmanship and material only. Demon Powersports’ warranty does not apply to failures resulting from misuse, negligence, accidents, improper application, improper installation, alteration, or lack of reasonable or proper maintenance, or if the machine is used in racing or commercial applications. This warranty does not cover normal wear and tear items such as gaskets, seals, boots, bearings, bushings, and rotors. Demon Powersports does not cover the cost of removal and reinstallation of any kind. -
New OEM driveshaft carrier bearing. Part number 705401646 replaces 705401498 Will come as pictured, please have a quick look at the bearing you are replacing, some 2014 models have a flat bottom bearing, we can help with that odd carrier bearing just shoot us a message. -
OUT OF STOCK
Ravek UTV Universal Sunglasses Holder. It’s mountable on ANY flat surface or 1.25”-2” roll bars with an ultra-durable semi-rigid, EVA molded structure. RAVEK’s magnetic closure means you won’t fight clogged zippers and can access your shades with a single hand. Install in 2 minutes to dozens of locations using fastening straps or 3M heavy-duty adhesive. Technical Specifications 7 3/8" Long, 3 3/8" Wide, 2 7/8" High Designed to Work With Standard And Safety Glasses Compatible With Up To 2" Roll Bar Adhesion Pad Included For Surface Mounting Magnetic Closure Easy To Clean Waterproof Design And Materials Keeps Out Dust And Particles Designed For One Hand Operation
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
canampartsguy@gmail.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.