2020 & Prior Commander

  • EPI A-Arm Bushing Kit Canam Upper/Lower Defender Commander G2 Outlander Renegade

    $29.99
    EPI Bushing Kit, steel inner, plastic outer bushings and shims
    Fits: G2 Canam ATV’s Outlander or Renegade
    Defender and Commander
    If you are unsure on fitment, please contact us before purchasing!
    Exact replacement components to return your suspension to like-new condition
    Kits are sold per A-arm
    EPI Part Number: WE341052
    P/U Part Number: 0430-1029
    Replaces OEM Part Numbers: 703500875 706202088 706202089 706202133
    Add to cart Details

  • NEW Moose Utility Ignition Switch Pigtail Harness 2120-0943

    $29.95
    For use with all BRP turn key type ignition switches. Will not fit RFID type ignitions. Simply cut off the old harness and use the included butt connectors or solder the connections to the new pigtail. Be sure to match up one wire at a time when installing, this helps avoid switching wire orientation as the wires are not color coded. The wires are 6” long so it can be fixed inside the headlight pod Sold each; includes butt connectors and zip ties Part number 2120-0943
    Add to cart Details

  • M10 Black Lug Nut Set of 16 14mm head Tapered Seat

    $29.95
    NEW Black Conical Taper M10 Lug Nut Set of 16 M10x1.25 thread size 60 Degree taper 14mm Hex head size, great for use with aftermarket wheels where socket space is a concern These will work on every Canam ATV since 2006 and most every Canam sxs Will not fit the Maverick X3 12mm wheel studs. Part numbers: 57-94121B, ALUGB14BX
    Add to cart Details

  • NEW OEM Commander Defender Wheel Cap Set Of Four

    $29.56
    NEW OEM Wheel Center Cap Set of Four Commander/Defender Style Please understand there are different styles of caps. This style fits on to the wheel not the hub. The last picture shows this installed. Please look for the part number on your other caps to verify fitment. Part number 705401541
    Add to cart Details

  • NEW OEM 850 or 1000R Spark Plug Boot Connector

    $28.99
    New Can Am spark plug boot connector part number 420265020 Will only work with spark plug style that is pictured Easy to replace. Just unscrew your old one and screw on your new one. Fits: 2013-2018 Maverick 1000R Turbo or Non Turbo 2018-2020 Commander 1000R 2016-2020 Outlander or Renegade 850/1000R 2015+ Outlander 450
    Add to cart Details

  • New OEM Wheel Center Cap Set

    $28.00
    BRAND NEW Can Am OEM Wheel Cap This is for a set of Four (4) Caps Part Number 705400928 There is more than one style. Please verify that this is the correct style BEFORE ordering.
    Add to cart Details

  • NEW OEM 705401969 Coupler No Wear Ring Needed

    $27.99
    NEW OEM BRP Coupler This is found on many machines, 18 spline exterior No need for a wear ring on this coupler. Part number 705401969 Replaces 703500678 705400149 705500201
    Add to cart Details

  • NEW OEM 2014-2019 Commander Rear Differential Pinion Seal

    $27.99
    Can Am Commander 800/1000 rear differential Pinion  Oil Seal This is a genuine OEM oil seal 90mm outer diameter 37mm inner diameter Will come as pictured Part Number 705501878
    Add to cart Details

  • VERTEX Water Pump Rebuild Kit for V-Twin Engines

    $27.05

    Vertex water pump rebuild kit

    Will fit all V-Twin Can-Am Engines

    Part Number 680-1957 821957

    Replaces OEM 420650370 420651190 420230415 420650310 420650315

    Add to cart Details

  • NEW OEM Secondary Clutch Outer Bearing

    $26.99

    New OEM Secondary Clutch Outer Bearing

    Current Part Number 420932421

    Replaces 420932426 and 711932426

    52mm Outer Diameter

    25mm Inner Diameter

    15mm Thick

    Add to cart Details

  • Can Am Output Shaft Rear Oil Seal Large Gearbox

    $26.99
    Can-Am Rear Transmission Seal. Fits Large Gear Boxes, Standard and Low Ratio. Brand New OEM Seal OUTPUT SHAFT SEAL found on rear of gearbox, just in front of the rear driveshaft. This is the seal that goes on the rear, where the rear driveshaft goes out to the rear differential. If you are unsure if this is correct, please measure your current seal. If you get close to these specs it should work, the other option is much smaller in outer diameter. 72mm outer diameter 35mm inner diameter Current part number: 420831955 420831956
    Add to cart Details

  • 420265248 Spark Plug Boot 2020 and prior

    $25.99

    One spark plug boot, this is used on many applications 2020 and older, if you are unsure on fitment, please contact us.

    Part number 420265248
    Replaces 710000041 and 420265240

    Add to cart Details

  • M10 Chrome Lug Nut Set of 16 14mm head Tapered Seat

    $25.99
    NEW Chrome Conical Taper M10 Lug Nut Set of 16 M10x1.25 thread size 60 Degree taper 14mm Hex head size, great for use with aftermarket wheels where socket space is a concern These will work on every Canam ATV since 2006 and most every Canam sxs Will not fit the Maverick X3 12mm wheel studs. Part numbers: 57-94121, ALUG14BX
    Add to cart Details

  • NEW OEM 20 Spline YOKE XMR/Maverick Rear Differential BARE

    $25.99

    20 Spline Yoke Fits: XMR 1000, Maverick and ’14 & newer Commander style Rear differentials. You will need a wear ring if you are using this on the differential side of the shaft. These yokes are made to very tight tolerances, if you are not careful when installing these you can damage the yoke or your pinion shaft. We recommend you take your time and clean the pinion gear before installing. —Great for custom applications— Uses Factory size U joint (398 at the auto parts store) Part numbers 715900271

    Add to cart Details

  • NEW OEM Front U-Joint

    $25.99
    Can Am Outlander Renegade Front U Joint These are found on the front prop shaft of G1 ATV’s and front drive shaft of Commander and Maverick (non X3/Sport/Trail) Also used on the 400 rear drive shaft 22mm caps. This is a new OEM part Replaces Part numbers:  703000023 703500814 703500607 703500135 703500002 703000024 715900183 715900325
    Add to cart Details

  • OEM Black Grab Bar for Commander Maverick 705203332

    $25.00
    Used- Good Condition OEM Can-Am Grab Handle for Commander & Maverick Product Number: 705203332 Comes as Pictured
    Add to cart Details

  • Aluminum Water Neck Upgrade Kit V-twin

    $25.00
    Replaces OEM part number 420222691 Upgrade your plastic thermostat housings/water neck on your vtwin 500/570/650/800/850/1000 SOLD AS PAIR These will work in Commanders, Mavericks, Outlanders & Renegades
    Add to cart Details

  • HD Clutch Bolt Kit

    $25.00
    HD Clutch bolt set for most every Can-am V-twin 2006 to current. Will not work on: Maverick Turbo Maverick X3 Maverick Sport Maverick Trail Defender These will swap out the factory Torque To Yield (TTY) bolts/studs. M10 and M12 Black-Oxide Alloy Steel Socket Head Bolt These are class 12.9 bolts, with a tensile strength of 170,000 psi, these alloy steel bolts are stronger than Grade 8 steel bolts. 8 and 10mm Allen Sockets required to install these bolts. 18-8 Stainless Steel Single-Wave Washers included, these help prevent loosening, use with your existing washers. Installation Torque Specs: 80 ft·lb On the Primary Bolt 45 ft·lb On the Secondary Bolt (red thread locker recommended, allow to set up overnight)
    Add to cart Details

  • NEW OEM Tail Light Wiring Harness Plug Pigtail G2/SXS

    $25.00
    New short wiring harness for rear tail lights Will need to be wired in to work. This plugs in to Tail light part number 710001645 Fits: G2 ATV's with dual tail lights, Commanders, and Mavericks (non X3/Sport/Trail)
    Add to cart Details

  • Late G2 Standard Rear Differential Seal Kit 1652

    $25.00
    Please verify your differential uses this style of Seals before ordering! Can Am Standard Rear Differential Pinion and Axle Seals (Timken or SKF) Please measure your parts before ordering to verify fitment. The Pinion Seal has a 70mm Outer Diameter and the standard 37mm inner diameter. Replaces part number 705401481 The Axle Seal has a 52mm Outer Diameter And the standard 30mm inner diameter. Complete Seal kit for Standard Rear differentials common to find in 2016 and newer ATVs or if your differential has been repalced.
    Add to cart Details

  • New OEM BRP 400/800 Big End Connecting Rod Bearing

    $24.99
    Plain bearing half 40 X 43 X 15 This fits into one side of the connecting rod. part number 420233980
    Add to cart Details

  • New OEM Valve Cover Gasket 420630260

    $24.99

    Brand New Genuine OEM Valve Cover Gasket. Will work on most Can Am engines from 2003 through current, front or back cylinder. Part number 420630260 replaces 420630262

    Add to cart Details

  • NEW Moose CVT Clutch Cover Gasket

    $24.95

    Brand New Moose Utility 13 Bolt CVT Cover Gasket

    Works on 7 bolt covers also.

    Part number 0935-1193

    replaces: 420430127 420430126 420430124 420430123 420430120

    Add to cart Details

  • NEW OEM 20 Spline Yoke No wear ring needed

    $24.49
    Fully machined 20 spline yoke To be used with 398 U joint on rear driveshafts No wear ring required, this is simply machined to the size of the wear ring This yoke slides into the rear differential. OEM part number 715900499
    Add to cart Details
Email Now for More Info

1340 Okray Ave.

Plover, WI 54467

jared@canampartsguy.com

Cant find What you're looking for?

Visit our store!

2016 Can Am Parts, LLC. All rights reserved.