2020 & Prior Commander

  • Brand New Genuine OEM Friction Washer Goes between Ball Bearing and Spring Seat on the Drive Pulley Clutch

    This is needed for correct engine braking on many models, not sure if you need it, please ask!

    OEM Part number: 420460430

  • NEW OEM Throttle Body Air Intake Neck Fits 850/1000 ATVs and 800R/10000 Commanders On ATV’s this connects the throttle body to the intake manifold On Commanders this connect the “Y” intake manifold to the 90* fitting Part number: 420267045

  • SHIPS FREE TO THE LOWER 48 STATES Late G1 Early G2 Standard Rear Differential Bearing and Seal Kit High quality aftermarket bearings along with double lip axle seals. Bearing and Seal Brands include: Nachi, KOYO, NTN, Timken The large case sealing and pinion gear O-rings are NOT included as a cost saving measure, these O-rings are reusable if not damaged. There are a few options for kits, please verify your differential uses this style of gears before ordering! This will only fit six mounting hole differentials. Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement. Measure your outer diameter of your axle seals! They should measure close to 1 3/4" (47mm) To further verify fitment you can measure your pinion pilot shaft, this should be 9/16″ (14mm) The last pictures show this very clearly. Please take the time to measure your parts before buying this will save time and restocking fees.
  • Can-am Commander style Outer CVT cover belt box Please check your cover before ordering, we can help if you do not know what to look for. This is the updated 13 bolt cover with the heat shield. Fits: Commander 800R two seat 2011-2020 Commander 800R MAX four seat 2016 Commander 1000 two seat 2011-2017 Part number 420612472
  • Heavy-duty ball joint kits feature durable steel-on-steel design and an adjustable end cap, which allows slop to be taken up as they wear

    Greased zerk fitting for easy grease delivery

    Replaces OEM part numbers: 706201393 706201576 706202045

    G2 ATV’s Commander, Maverick, Maverick X3, Maverick Sport, Maverick trail
    Unsure on fitment, please ask!

    Moose Racing number 0430-1035

  • NEW AFTERMARKET STARTER SPRAG VTWIN Starter Clutch One Way Bearing for Can-Am Will come as pictured Replaces OE Part Numbers:420659112 420659111 420659261 420659263 420659260
  • Brand NEW OEM Tail Light Assembly Found in G2 Renegade and Outlander, Commander and Maverick. Fits left or right. Part Number 710001645

  • New OEM Secondary Clutch Outer Bearing

    Current Part Number 420932421

    Replaces 420932426 and 711932426

    52mm Outer Diameter

    25mm Inner Diameter

    15mm Thick

  • Plain bearing half 40 X 43 X 15 This fits into one side of the connecting rod. part number 420233980
  • EPI roller kit  Part number WE210933 The rollers in this kit were designed by The Clutch Guys to replace the stock composite rollers. They are CNC machined and hardened for a long service life. The stock composite rollers that Can Am uses tend to flat-spot very quickly, resulting in greater friction and reduced primary clutch reaction. Upgrade to these custom metal rollers for improved clutch function. The kit includes 6 custom metal rollers with bushings, 6 roller pins and 12 roller washers Replaces oem numbers: 420233893, 417223257, 420229995, 417223767, 420626230, 420626231
  • OUT OF STOCK
    NEW Genuine OEM Coolant Temperature Sensor This screws into the cylinder head Part Number 278002895
  • Can Am Commander seat bottom cover Solid Black in color Brand new OEM Part Number: 708000674 708001103
  • Sale!

    NEW TAKE OFF Yoke 20 Spline Partial Machined Gearbox Side

    Original price was: $22.50.Current price is: $15.00.
    New take off gearbox side, 20 spline yoke. This fits on large gearboxes output shafts. 20 spline yoke partially machined to accept a protector ring. This is the forward most yoke on the REAR driveshaft. Works with 398 U joints. found on Vtwin rear driveshafts. Part number 715900129 replaces 705501373 and 715900234
  • Aftermarket Four wheel drive servo motor.

    This is what engages the sliding collar putting power to the front differential.

    Replaces oem 715900614 4151 29174 420891087

  • NEW OEM Wheel Center Cap Commander/Defender Style Please understand there are different styles of caps. This style fits on to the wheel not the hub. The last picture shows this installed. Please look for the part number on your other caps to verify fitment. Part number 705401541
  • SHIPS FREE TO THE LOWER 48 STATES! Can-am NEW OEM Main bearing set. Kit includes: Main Bearing Half with Oil hole 420233965 x2 Main Bearing Half without Oil hole 420233960 x2 PTO Cover Bearing 420233995 Be sure to mark your cases before pressing them out! The oil holes need to be lined up!
  • NEW Black Conical Taper M10 Lug Nut Set of 16 M10x1.25 thread size 60 Degree taper 14mm Hex head size, great for use with aftermarket wheels where socket space is a concern These will work on every Canam ATV since 2006 and most every Canam sxs Will not fit the Maverick X3 12mm wheel studs. Part numbers: 57-94121B, ALUGB14BX
  • Brand New OEM Helix Cam. Fits all non-turbo Maverick and Maverick MAX from 20013-2018. Also fits 2018+ Commander 1000R & Commander MAX 1000R Part number 420280474
  • NEW OEM BRP Coupler This is found on many machines, 18 spline exterior No need for a wear ring on this coupler. Part number 705401969 Replaces 703500678 705400149 705500201
  • NEW OEM Oblong Oval Grommet Part number 705003668 replaces 705002665 and 705001121
  • OEM Can-Am Head Gasket part # 420630195 Fits 400, 800, 1000 engines. Will support up to 91mm bore (first over bore) This is for ONE (1) Gasket. Most applications will need 2 (V-twin) if doing full rebuild.
  • NEW OEM Timing Chain Tensioner Kit Sold as a Pair, enough to do one vtwin engine. Fits: 500 570 650 800HO 800R 850 1000 1000R engines.   Part numbers 711641150 420641150 420430370 420430373 290250890 420250890 711238120 420238120 420236520 420236521 711236520 711236510 420236510
  • EPI Primary Clutch Slider Buttons WE210931

    Replace your worn slider buttons with these from The Clutch Guys. Worn slider buttons cause noise, poor shift reaction and potentially damage to your primary clutch. Buttons that are allowed to wear too far will eventually fall out of place causing major damage to the clutch. If your clutch has a lot of miles on it be sure to inspect your rollers also.

    The kit includes 12 replacement slider buttons

    Replaces OEM part numbers: 420281290 420281291 420281293 420281296 711281290

  • New OEM Compression Spring Will work on Commander, Maverick, Renegade, and Outlander Only for secondary clutch Will come as pictured 420238176