New Genuine OEM Can-am radiator cooling fan assembly Fits on some G2 Outlander/Renegade and OG Maverick, please check part numbers for fitment. Will not fit XMR Outlander’s Current part number 709200563 Old part numbers 709200317 709200488
Canam Outer CVT Cover Commander/Maverick 1000R Please look at pictures to verify fitment. This has two breather holes, one in front of the primary, one on the secondary. This cover is the factory replacement for 420612319, some aftermarket clutches will not clear the new breather hole style you may need to modify this cover or backdate it to the 420612313 style with out the secondary breather. Fits: Commander 1000R two seat 2018-2020 Commander 1000R MAX four seat 2018 Maverick 1000R two seat 2014-2018 Maverick 1000R MAX four seat 2014-2018 Will not fit: 2015-2018 Maverick 1000R Turbo 2017-2018 Maverick 1000R XMR If you have questions please ask! Current Part number 420212286 replaces 420612319 420612470
NEW OEM Wheel Center Cap Commander/Defender Style Please understand there are different styles of caps. This style fits on to the wheel not the hub. The last picture shows this installed. Please look for the part number on your other caps to verify fitment. Part number 705401541
NEW OEM Wheel Center Cap Set of Four Commander/Defender Style Please understand there are different styles of caps. This style fits on to the wheel not the hub. The last picture shows this installed. Please look for the part number on your other caps to verify fitment. Part number 705401541
Brand New Genuine OEM Radiator
Fits 2011-2020 Commander and 2013-2018 Maverick (non X3/Sport/Trail)
Current Part Number 709200395 Replaces Part Number 709200252
Can Am Commander or Maverick Wheel Stud M10 Stud diameter 27.5mm spacing for brake rotor Part number 250300060 replaces 250300051
NEW OEM 2014-2019 Commander 800R 1000 1000R Rear Differential This **WILL NOT** work for 2011-2013 Commanders This **WILL NOT** work for with Commanders Equipped with a LOCKING REAR DIFFERENTIAL. This **WILL NOT** work for 2020 Commanders 705502517 705501804 705502096 705502331
New Genuine OEM handle for your commander cargo box. Will work on the upper tail gate or lower cargo door Part number 708300398
Can Am Commander seat bottom cover Solid Black in color Brand new OEM Part Number: 708000674 708001103
New Genuine OEM CVT Cover Drain Plug This clamps on to your outer cvt cover. Part number 707001179
NEW OEM CVT cover with heat shield installed from factory
Fits:
Maverick 1000R two seat 2013-2014
Commander 1000 MAX four seat 2014-2016
Commander 800R MAX four seat 2017-2019ONE Breather hole in front of Primary clutch.
This is the cover with the most room. Common to use this on newer V-twin 1000R Mavericks with aftermarket clutches that do not require the extra breathers.
Please match this up with yours before purchasing.
Part number 420612318
Replaces 420612312 420612313 715900257 420975052
Brand New Genuine OEM 13 Bolt CVT Cover Gasket
Works on 7 bolt covers also.
Part number 420430127 replaces: 420430126 420430124 420430123 420430120
SHIPS FREE TO THE LOWER 48 SATES Can-am 2013 1000R Maverick Commander style CVT covers. This is the 13 bolt cover set. Popular for aftermarket clutch set ups. Only one breather hole in front of the primary clutch works on non Turbo Machines This kit will keep the water out! Comes with: 2013 Maverick 1000R covers inner and outer. CVT Cover Gasket CVT plug PTO O-ring Gear box O-ring Inner CVT Bolts/Nut 13 Cover screws Part Numbers: 420612312 420612313 420611407 420440568
SHIPS FREE TO THE LOWER 48 STATES Can-am Commander style CVT cover set. This is the 13 bolt cover set, with attached reflective heat foam. Fits: Commander 800R two seat 2011-2020 Commander 800R MAX four seat 2016 Commander 1000 two seat 2011-2017 This kit will keep the water out! Comes with: Commander covers inner and outer. CVT Cover Gasket CVT Drain plug and Clamp Engine O-ring Gear box O-ring Inner CVT Bolts/Nut 13 Cover screws Part numbers: 420612472 715900200 420611407 420440568 420430408 420631088 420430126 420440567 420440568
NEW OEM CVT cover with heat shield installed from factory Fits: Maverick 1000R two seat 2013-2014 Commander 1000 MAX four seat 2014-2016 Commander 800R MAX four seat 2017-2019 ONE Breather hole in front of Primary clutch. This is the cover with the most room. Common to use this on newer V-twin 1000R Mavericks with aftermarket clutches that do not require the extra breathers. Inner cover 420611407 Outer cover 420212318 13 Hex head CVT housing bolts 420440568 Gasket 420430126 O-rings – 420430407 and 420631087 Hex Bolts – 420440207 Also has a nut and washer – 232561434, 224061121 Nylon drain plug and clamp
SHIPS FREE TO THE LOWER 48 SATES Can-am 13 bolt ATV CVT cover set. This will fit on any 2006-current v twin ATV, Renegade or Outlander, 500 650 800 or 1000. This cover will not clear primary clutches with studs (1000R applications) This is the kit many swap to, this kit will keep the water out! We recommend a light coat of thread lubricant on the cover screws, keeps the inserts from spinning. Comes with: XMR Clutch covers inner and outer. Center Rubber Gasket Drain plug with clamp PTO O-ring Hardware to attach inner cover to gearbox/engine Gear box O-ring 13 Cover screws (hex head style) Part Numbers: 420611397 420611390 420611391 420611393 420611407 420440568
CVT Rear Boot (the boot that connects to the exhaust side of the inner CVT cover plate. This is the updated part and will work on all G1 V-Twin ATV’s . This replaces 707000789, this newer style will not work on the xmr 2011-12 where the exhaust riser pipe meets the upper tube. Current Part Number 707001274
Brand New Genuine OEM Can-am Inner Cover Air Guide Clutch backing plate, this is the part that is against the engine and gearbox on most every can-am v twin. 13 Bolt design allows for better sealing We recommend adding anti seize thread lubricant when installing your cvt cover bolts. Old Part Number 420611409, 420611408 Current Part Number 420612304
Brand new Genuine OEM flexible CVT intake adaptor for Renegade, Outlander, Maverick, and Commander.
This replaces the thin rubber boot that comes on many early CanAm V-Twin models.
Very nice upgrade for a cracked CVT intake boot.
Current part number 707002585
Previous part numbers 707001467, 707001043, 707000719
SHIPS FREE TO THE LOWER 48 STATES OEM Outer CVT Cover 2013 Maverick 1000R ONE Breather hole in front of Primary clutch. This is the cover with the most room. Common to use this on newer Vtwin Mavericks with aftermarket clutches that do not require the extra breathers. Current Part Number: 420612313 replaces 420612312 Will not fit Maverick X3/Sport/Trail
Magnetic button to cycle through displays on your dash/speedometer Please compare this to your original button Part number 415129355 replaces 710002312
Magnetic button to cycle through displays on your dash/speedometer Please compare this to your original button Part number 710001473 replaces 710001417
Outlander Renegade Commander Maverick Differential Drain Plug Brand New Genuine OEM Drain Plug 9.9 mm outside diameter Will fit on some fronts and rears be sure yours looks like this one and measures the same Part Number 705500894
Brand New Genuine OEM Fill Level Plug Be sure that yours looks the same due to other styles for front or rear differential from different years M14 diameter 1.5 thread pitch Part number 705500504
Cam Am rubber bellow for front or rear differential. This is a brand new OEM rubber bellows. Part number 705400352
New OEM driveshaft dust protector Protects the gearbox seal Current part number 705501123 Replaces 705500678 and 705500902
Brand New Genuine OEM Rubber Boot Fits Commanders Mavericks Outlanders Renegades Used for sliding joints Part number 715900118
NEW Genuine OEM Coolant Temperature Sensor This screws into the cylinder head Part Number 278002895
NEW OEM Front Driveshaft. Current Part number 705402066, replaces 705401939 and 705401239 This shaft connects the front differential to the engine on two seat models. On MAX four seat commanders this is the forward most driveshaft that connects the front differential to the intermediate shaft. Fits: 2014-2020 Commander 800R, 1000 or 1000R
Can Am Outlander Renegade Front U Joint These are found on the front prop shaft of G1 ATV’s and front drive shaft of Commander and Maverick (non X3/Sport/Trail) Also used on the 400 rear drive shaft 22mm caps. This is a new OEM part Replaces Part numbers: 703000023 703500814 703500607 703500135 703500002 703000024 715900183 715900325
Can-am Outlander, Renegade or Commander 500 650 800 1000 6 Bolt HD rear Differential. This is an OEM Canam part used in many Generation 1 atvs. It has the bracket for the rear brake caliper on it. This is an updated version with much more substantial webbing for improved support. Fits: 2006-2011 Outlander and Renegade 500 650 800 800 2012 Outlander MAX 400 500 650 800 2011 2012 Outlander 800XMR 2006-14 Outlander 400 2011-2013 Commander 800 1000 Current Part Number 703501033 Previous Part Numbers 703500892 705502069 705501569 Interchanges with: 705500774 705500822 705501412 705500891 705501093 705501047 705501997
New OEM bushing kit for Commander, G2 Renegade and G2 Outlander This is a genuine OEM kit with bushings and wear plate. Order two (2) per arm. One kit does one attachment point. Part numbers: 706202088 706202089 706202133 703500875
Brand NEW Genuine OEM Upper Ball Joint For G2 ATV , 2012-Current Commander and Maverick Will not Fit Maverick X3/Trail/Sport Does NOT include Circlip, Cotter Pin, Hardened Washer, or M12 Nut. Be sure to save your old ones Part Numbers: 706200741 706201370 706201394 706202044
NEW OEM 450 and 570 Outlander keyed ignition switch, and matched keys Two position switch, non DESS Style. This is just on and off. No headlight control. Used on 2017 and newer G2L ATV’s Comes with main key and back up key These are not the electronic black keys, these are cut keys to match the ignition switch Part Number 710007864 replaces 710005153
SHIPS FREE TO THE LOWER 48 STATES NEW OEM Gearbox Angle Rotation Sensor (gear position sensor) This is used on the Large Gearbox Part Number 420266168
OEM O ring this seals the gearbox oil, it is installed on the rear through shaft bearing housing. Roughly two inches in diameter. Part Number 420230306 replaces 420230305
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.