NEW Push to start button Genuine OEM button Will work on 2011-2020 Commander and Commander Max and 2013-2018 Maverick and Maverick Max Part number 710002594
Brand New OEM PTO Cover Gasket for V-Twin Engines Part number 420651211
Can-am OEM tool. High-quality, heat-treated steel for superior strength. A tool needed to pull primary clutches off the crank shaft taper. Part Number: 529035746
Brand New Genuine OEM Friction Washer Goes between Ball Bearing and Spring Seat on the Drive Pulley Clutch
This is needed for correct engine braking on many models, not sure if you need it, please ask!
OEM Part number: 420460430
NEW OEM Canam PPS Sport Mode Switch Part number 710002199 Fits: 2011-2013 Commander 1000 and 800R 2013 Maverick 1000R Amber backlight
NEW OEM Shim Kit for standard pinion gears. Wide Range of shims, this will allow you to set up your pinion depth. 37mm Outer Diameter. 27.45mm Inner Diameter. This is a loose fit Fits Front or Rear Standard Differentials Part number 705502061
New Can Am Outlander Renegade and Commander V-Twin EFI Speedo Speedometer Display Dash 2018-2020 Please understand 2017 and older models require a different dash, even if yours looks the same. This is the factory Gauge/Screen. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. Contact for more information. It will display 0 miles, please record your current miles for your records. Current Part number: 710005553
Can-am Commander style Outer CVT cover belt box Please check your cover before ordering, we can help if you do not know what to look for. This is the updated 13 bolt cover with the heat shield. Fits: Commander 800R two seat 2011-2020 Commander 800R MAX four seat 2016 Commander 1000 two seat 2011-2017 Part number 420612472
Brand New Genuine BRP Oil Filter
Current Part number 420256188 Replaces 711256188
Will fit Maverick Commander Defender Renegade Outlander DS
NEW OEM Oblong Oval Grommet Part number 705003668 replaces 705002665 and 705001121
OEM oring commonly used on distance ring on gearbox input shaft. 420631610 replaces 420631615
NGK 4339 DCPR8E Standard Plug Fits All G1 ATV's OE numbers: 707000246 715900637 Thread Size: 12mm Thread Pitch: 1.25mm Seat Type: Gasket Resistor Value: 5K Ohm Reach: 19mm (3/4") Hex Size: 5/8" (16mm) Terminal Type: Removable Nut (you will need to remove this for use on G1 ATV's) Gap: .028" (0.7mm) Torque Specs Aluminum: 10.8-14.5 lb. ft. Brand: NGK Heat Range: 8 Longevity: 30k Miles Resistor: Yes Projected Material: Nickel Quantity: 1
These dashes are found on many machines.
2014-2017 Maverick, Commander, Renegade and Outlander models with the Standard Digital Dash Mount This is the factory Gauge/Screen.
The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. Contact for more information.
It will display 0 miles, please record your current miles for your records.
Current part number: 710005087
Replaces part numbers: 710003851 710003924 710005024 710005208
New Can Am Maverick Renegade and Commander V-Twin EFI Speedo Speedometer Display Dash 2007-2013 Please understand 2014 and newer models require a different dash, even if yours looks the same. This is the factory Gauge/Screen. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. Contact for more information. It will display 0 miles, please record your current miles for your records. Current Part number: 710003288 Previous part numbers: 710001024 710001351 710001526 710001987 710002294 710002535
CVT cover set for Turbo V twin Mavericks 1000R Best to pull your cover and visually inspect it for fitment. This cover has two holes over the primary clutch and one over the secondary. If you are unsure on fitment, please contact us! Fits: 2015-2018 Maverick 1000R Turbo 2017-2018 Maverick 1000R XMR Will not fit Maverick X3 Comes with: Maverick Turbo covers inner and outer. CVT Cover Gasket CVT plug PTO O-ring Gear box O-ring Inner CVT Bolts/Nut 13 Cover screws Part numbers 420212285 420611407 420440568- Sale!
This is a brand new OEM Maverick Belt This is the correct belt for the 2013-18 "OG" Maverick 1000R turbo or non turbo WILL NOT FIT X3, sport or trail Maverick models. This will fit all VTWIN 500, 570, 650, 800, 800R, 850, 1000, 1000R Outlander or Renegade This will fit 2011-2020 Commander 800R, 1000, and 1000R WILL NOT FIT 2021+ Commander ? This is the strongest belt for the Can-am Vtwins on the market. We recommend this belt if you have over sized tires or use your machine in extreme conditions. OLD Part Numbers 715900212 422280364 NEW Part Number 422280367 WILL NOT FIT X3, sport or trail Maverick models. WILL NOT FIT 2021+ Commander 
NEW OEM Commander Front Upper Arm Bolt 250001032 replaces 250000510 m10x225
Can Am OEM lower ball joint Old part number is 706201393 706201576 Current part number is 706202045
OEM Can-am Low Beam Headlight Does not include any mounting brackets or hardware, what is pictured is what is shipped to you. Fits: Renegade, Commander and Maverick (non X3/Sport/Trail) Will not fit on Outlanders. Outlanders use reflector style headlights on the low beams. Part Number: 710002524- OUT OF STOCK
LinQ Stackable Fuel Caddy with brackets to mount on G2 ATV’s and SXS with the LinQ system
WILL NOT FIT G2L or G1 ATV LinQ mounting holes need to be 16″ on center
14.5-liter (3.8 US gallons) capacity
Very solid mounting system for carrying extra fuel
No tools need to install, mounting blocks twist into place and lock in solid.
This caddy has a rubber strap to secure the lock 100%
Part numbers: 715004960 295100752
NEW GENUINE OEM part Part number 705600679 Includes: 715500333 715500383 705600080 715500335 715500337 This is the drivers side front caliper left hand side Fits two seat models: 2011 Commander 800 2012-2020 Commander 800R 2011-2017 Commander 1000 2013-2015 Maverick 1000R STD XRS XXC 2016-2018 Maverick 1000R STD DPS XC XXC WILL NOT FIT TURBO, XMR, OR MAX MODELS
New OEM inner clutch cover O-ring kit Comes with the following parts Small O-ring 420430408 Large O-ring old part number 420450430 or current part number 420450431 This kit will fit the following machines 2016-2019 Defender HD8 and HD10 2018-2019 Maverick Trail 800R and 1000R 2019 Maverick Sport 1000R
NEW OEM ignition switch. Part number 710008400 replaces 710002327 710003847 It will work on all 2011 to 2019 Commanders, 2012 to 2016 Generation 2 Outlanders and Renegades and 2013 to 2018 Mavericks. Key sold separately.
NEW OEM Idle Gear Oil Seal Part number 420430555
OEM Canam Projector High Beam projector head light assembly with 9005 bulb. Brand NEW! High quality HELLA brand made in Austria. Fits many models please ask if you are unsure! Part Number 710002525
New OEM Can Am Factory Helix If you are unsure about fitment, contact us. We are here to help! Current Number 420280472 Old part numbers: 420280193 420280198 420280470
Genuine Can Am 800R/1000 Green Fuel Injector OEM Part Part number: 420874833 replaces 420874830
OEM O ring this seals the gearbox oil, it is installed on the rear through shaft bearing housing. Roughly two inches in diameter. Part Number 420230306 replaces 420230305
SHIPS FREE TO THE LOWER 48 STATES NEW OEM Gearbox Angle Rotation Sensor (gear position sensor) This is used on the Large Gearbox Part Number 420266168
NEW OEM 450 and 570 Outlander keyed ignition switch, and matched keys Two position switch, non DESS Style. This is just on and off. No headlight control. Used on 2017 and newer G2L ATV’s Comes with main key and back up key These are not the electronic black keys, these are cut keys to match the ignition switch Part Number 710007864 replaces 710005153
Brand NEW Genuine OEM Upper Ball Joint For G2 ATV , 2012-Current Commander and Maverick Will not Fit Maverick X3/Trail/Sport Does NOT include Circlip, Cotter Pin, Hardened Washer, or M12 Nut. Be sure to save your old ones Part Numbers: 706200741 706201370 706201394 706202044
New OEM bushing kit for Commander, G2 Renegade and G2 Outlander This is a genuine OEM kit with bushings and wear plate. Order two (2) per arm. One kit does one attachment point. Part numbers: 706202088 706202089 706202133 703500875
Can-am Outlander, Renegade or Commander 500 650 800 1000 6 Bolt HD rear Differential. This is an OEM Canam part used in many Generation 1 atvs. It has the bracket for the rear brake caliper on it. This is an updated version with much more substantial webbing for improved support. Fits: 2006-2011 Outlander and Renegade 500 650 800 800 2012 Outlander MAX 400 500 650 800 2011 2012 Outlander 800XMR 2006-14 Outlander 400 2011-2013 Commander 800 1000 Current Part Number 703501033 Previous Part Numbers 703500892 705502069 705501569 Interchanges with: 705500774 705500822 705501412 705500891 705501093 705501047 705501997
Can Am Outlander Renegade Front U Joint These are found on the front prop shaft of G1 ATV’s and front drive shaft of Commander and Maverick (non X3/Sport/Trail) Also used on the 400 rear drive shaft 22mm caps. This is a new OEM part Replaces Part numbers: 703000023 703500814 703500607 703500135 703500002 703000024 715900183 715900325
NEW OEM Front Driveshaft. Current Part number 705402066, replaces 705401939 and 705401239 This shaft connects the front differential to the engine on two seat models. On MAX four seat commanders this is the forward most driveshaft that connects the front differential to the intermediate shaft. Fits: 2014-2020 Commander 800R, 1000 or 1000R
NEW Genuine OEM Coolant Temperature Sensor This screws into the cylinder head Part Number 278002895
