420927837 Thermostat Gasket Sold Each, vtwin’s require two per engine.- OUT OF STOCK
NEW OEM BRP Thermostat Current part number 709200406 replaces 709200383 This style is external from the cylinder head. If you are unsure on fitment please contact us. 
New short wiring harness for rear tail lights Will need to be wired in to work. This plugs in to Tail light part number 710001645 Fits: G2 ATV's with dual tail lights, Commanders, and Mavericks (non X3/Sport/Trail)
Brand NEW OEM Tail Light Assembly Found in G2 Renegade and Outlander, Commander and Maverick. Fits left or right. Part Number 710001645
NEW OEM Winch Switch 710002052 New Genuine OEM Can-Am 4 Wheel Drive Switch This operates the winch on your SXS This is a two position momentary rocker switch. Fits: Commander, Maverick and Maverick Turbo, Maverick X3, Maverick Sport, Defender If you aren’t sure if this will fit, please ask, we will help! Part number 710002052
OEM Canam Insert, this holds cab interior panels together in your maverick or commander. Part Numbers: 707900133 503189273
Brand New OEM Reverse Override Rocker Switch Fits: Commander, Maverick and Maverick Turbo, Maverick X3, Not compatible with Maverick Sport/Trail or Defender If you aren’t sure if this will fit, please ask, we will help! Part number 710002053
OEM Canam Insert, this holds cab interior panels together in your maverick or commander.
Part Number: 707900133
New Genuine OEM Can Am High Low light switch This selects the high or low beams function on your SXS This is a two position switch. Fits Commander, Maverick and Maverick Turbo Will not fit Maverick X3/Sport/Trail If you aren't sure if this will fit, please ask, we will help! Part number 710001725
OEM Rocker Switch for DPS Fits Commander, Maverick, Maverick Turbo and Maverick X3 Not compatible with Maverick Sport/Trail If you aren't sure if this will fit, please ask, we will help! Part Number 710001781
Seat Bottom Fits Commanders, and Mavericks. 800 or 1000 Will not work on Maverick X3/Sport/Trail Current part number 703500943 Replaces part numbers: 708001085 708001102 708001318
SHIPS FREE TO THE LOWER 48 STATES Seat Bottom Fits Commanders, and Mavericks. 800 or 1000 Will not work on Maverick X3/Sport/Trail Part number 703500945 Replaces 708001316
New Genuine OEM Can-Am 4 Wheel Drive Switch This selects the two wheel drive or four wheel drive on your SXS This is a two position rocker switch. Fits Commander, Maverick and Maverick Turbo Will not fit Maverick X3/Sport/Trail If you aren’t sure if this will fit, please ask, we will help! Part number 710001737
OEM genuine Can-am Steering Wheel Tilt Adjustment Cylinder
Will work on all Commanders Mavericks and Defenders
Part number 709402506 replaces 709400656 709402419
Brand New OEM Stator Cover Gasket for V-Twin Engines. Fits 2006-Current V twin’s Part number 420651201
Can-Am starter solenoid. This is a Genuine OEM part
Will work on most Can-Am models.
WILL NOT WORK ON MAX SXS’s
A quick visual inspection will make it easy to order the correct part. It will be very clear if this is the same as yours.
Part Number 710001364
New OEM Can Am Outlander, Renegade, Maverick or Commander Gear Box
Current Part Number- 420686650
Previous Part Numbers – 420684783, 420684786, 420684784, 420248529, 420620925, 420685805, 421000698NEW OEM Canam Part NOT A REBUILD, ALL NEW Brand New In The Box
Fits- Maverick 1000R, Commander 1000 or 800, Outlander 1000 2012-2014, all Outlander XMR 1000, Renegade 1000.Standard ratio, low ratio also available. If unsure of fitment, please contact us. We will be happy to help!
If you are using a QRS secondary clutch (turbo applications) transfer your distance ring from your previous gearbox.
Ring and Pinon Gears 37/15=2.467
Intermediate 45/44=1.023
High Range 36/27=1.333
Low Range 44/19=2.316
Reverse 34/12=2.833
High Range Ratio 3.364
Low Range Ratio 5.842
Reverse Ratio 7.148
New OEM Differential Pinion Seal. Please check your wear ring, if that is grooved it is time to replace. Very easy to miss that and blame a new seal on a bad wear ring. Will fit: Gen 1 Front and Rear Diffs Gen 2 Outlander and Renegade Front and Rear Early Commander Rear All Maverick and Commander Front WILL NOT FIT G2 XMR 800/850/1000 REAR DIFFERENTIAL Measurements are shown: 70mm outside and 37mm inside Part number 705401481
SHIPS FREE TO THE LOWER 48 STATES New OEM Standard G2 Rear Differential Ring & Pinion Gear Set 1652 There are a few options for kits, please verify your differential uses this style of gears before ordering! This will only fit six mounting hole differentials. OEM Rear Differential Gear set 10/36 Ring and Pinion gear set. The gears are straight cut as pictured. Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement. Measure your outer diameter of your axle seals! They should measure close to 2 1/16? (52mm) To further verify fitment you can measure your pinion pilot shaft, this should be 5/8? (16mm) Please take the time to measure your parts before buying this will save time and restocking fees. Fits 2015 -2019 G2 style ATV 500/570/650/800/850/1000/1000R NON-XMR style REAR differential. 570/650 XMR machines do not have the true XMR differential.
1652 G2 Standard Rear Differential Rebuild Kit Please note, application alone is not accurate enough, please measure your parts before ordering! There are a few options for rebuild kits, please measure your parts before ordering!! OEM Rear Differential Gear set 10/36 Ring and Pinion gear set. The gears are straight cut as pictured. Paired with high quality aftermarket ball bearings along with double lip axle seals. If your differential has tapered roller bearings, this will not fit. This kit should be installed by an experienced technician. Shims are included as the gears will need to be set up in your cases. Note: the O rings are not included, this is a cost savings measure as they are generally reusable. This kit will only fit six mounting hole differentials. Measure your outer diameter of the pinion seal, it should measure 2 3/4" (70mm) Measure your outer diameter of your axle seals! They should measure close to 2 1/16″ (52mm) To further verify fitment you can measure your pinion pilot shaft, this should be 5/8″ (16mm) Please take the time to measure your parts before buying this will save time and restocking fees. Fits 2015 and newer G2 style ATV 500/570/650/800/850/1000/1000R NON-XMR style REAR differential. 570/650 XMR machines do not have the true XMR differential.- OUT OF STOCK
New OEM Differential Pinion Oil Seal. Please check your wear ring, if that is grooved it is time to replace. Very easy to miss that and blame a new seal on a bad wear ring. Will fit: Gen 1 Front and Rear Diffs 2012-18 Outlander and Renegade Front and Rear Early Commander Rear All Maverick and Commander Front WILL NOT FIT G2 XMR 800/850/1000 REAR DIFFERENTIAL or 2019 and newer Measurements: 70mm outside diameter and 37mm inside diameter Part number 705401615 
New OEM front differential axle seal
Outer diameter is 47mm
Inner Diameter is 25mm
Part numbers: 705401486 705401618
NEW OEM BRP Magnetic button to cycle through displays on your dash/speedometer Please compare this to your original button Part number 715900265 Works with base digital dash, if you are unsure on fitment please contact us we will help.
Can Am OEM parts.
Spring and Spring Cup set, two springs and two spring cups.
These are the little parts that go flying across the shop floor when you open up your Can Am factory primary clutch.
These parts are what helps give your machine engine braking.
Part numbers: 420229577 420239134
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.