SHIPS FREE TO THE LOWER 48 STATES Late G1 Early G2 Standard Rear Differential Bearing and Seal Kit High quality aftermarket bearings along with double lip axle seals. Bearing and Seal Brands include: Nachi, KOYO, NTN, Timken The large case sealing and pinion gear O-rings are NOT included as a cost saving measure, these O-rings are reusable if not damaged. There are a few options for kits, please verify your differential uses this style of gears before ordering! This will only fit six mounting hole differentials. Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement. Measure your outer diameter of your axle seals! They should measure close to 1 3/4" (47mm) To further verify fitment you can measure your pinion pilot shaft, this should be 9/16″ (14mm) The last pictures show this very clearly. Please take the time to measure your parts before buying this will save time and restocking fees.
SHIPS FREE TO THE LOWER 48 STATES Standard G2 Rear Differential Bearing and Seal Kit High quality aftermarket bearings along with double lip axle seals. Bearing and Seal Brands include: Nachi, KOYO, NTN, Timken, SKF The large case sealing and pinion gear O-rings are NOT included as a cost saving measure, these O-rings are reusable if not damaged. There are a few options for kits, please verify your differential uses this style of gears before ordering! This will only fit six mounting hole differentials. Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement. Measure your outer diameter of your axle seals! They should measure close to 2 1/16″ (52mm) To further verify fitment you can measure your pinion pilot shaft, this should be 5/8″ (16mm) The last pictures show this very clearly. Please take the time to measure your parts before buying this will save time and restocking fees. Fits 2015 and newer G2 style ATV 500/570/650/800/850/1000/1000R NON-XMR style REAR differential.570/650 XMR machines do not have the true XMR differential.
SHIPS FREE TO THE LOWER 48 STATES Set of Bearings and Seals to Rebuild Your Front Differential on Your Can-Am Fits Most Can-Am Models from 2007-Current (WILL NOT FIT Maverick X3/Sport/Trail or Defender) This Kit has High Quality Aftermarket Bearings which are: Timken, SKF, NSK, KOYO, Nachi Comes with: 2 - Carrier Bearings- SKF Brand 2 - Axle Bearings- OEM NSK Japan made 2 - Axles Seals- Timken 1 - Inner Pinion Bearing- Nachi Japan made 1 - Large Pinion Bearing- Koyo Japan made 1 - Pinion Seal
New Genuine OEM Works on 2014-2020 Commander and Commander Max (2011-2013 Do not have a oxygen sensor) 2013-2018 Maverick and Maverick Max 2017-2020 Maverick X3 and Maverick X3 Max 2018-2020 Maverick Trail 2019-2020 Maverick Sport 2017-2020 Defender and Defender Max If your machine has ECO mode it will have a oxygen Sensor from factory Part number 707600872
800/1000 Top end Gasket set Includes: 2 Head Gaskets 2 Cylinder Base Gaskets 2 Valve Cover Gaskets 2 Exhaust port crush gaskets 2 Intake Manifold Seals 8 valve seals Various O rings for fuel injectors, coolant fittings etc.. Moose gaskets are made to the same high quality standards as OEM. Part number 0934-3017
New OEM Can Am Factory Helix If you are unsure about fitment, contact us. We are here to help! Current Number 420280472 Old part numbers: 420280193 420280198 420280470
Brand New Genuine OEM Can-am Inner Cover Air Guide Clutch backing plate, this is the part that is against the engine and gearbox on most every can-am v twin. 13 Bolt design allows for better sealing We recommend adding anti seize thread lubricant when installing your cvt cover bolts. Old Part Number 420611409, 420611408 Current Part Number 420612304
Rugged wheels spacers are made from T6061 aluminum alloy and are precisely CNC machined for accurate dimensions. Spacers can be direct bolt on and can use OEM studs. If you are looking to widen the stance of your machine, clear larger tires or get some new wheels. These spacers are just what you need. These spacers are sold as a pair. Two inch thick The bolt pattern is 4x137mm M10 studs Part number PAWS-1037
Brand New OEM Helix Cam. Fits all non-turbo Maverick and Maverick MAX from 20013-2018. Also fits 2018+ Commander 1000R & Commander MAX 1000R Part number 420280474- OUT OF STOCK
Aftermarket Four wheel drive servo motor. This is what engages the sliding collar putting power to the front differential. Part number 715900614 420891087 415129174 
OEM Can-am Low Beam Headlight Does not include any mounting brackets or hardware, what is pictured is what is shipped to you. Fits: Renegade, Commander and Maverick (non X3/Sport/Trail) Will not fit on Outlanders. Outlanders use reflector style headlights on the low beams. Part Number: 710002524
New 2014-2019 can am commander 800 or 1000 rear driveshaft. This will not fit 2011-2013 Commanders. We install the protector to make it a straight forward install for you! This is the new style yoke that does not require a wear ring. This is an OEM CanAm shaft, do not confuse this with sub grade Chinese products. This has the larger yoke end for the 2014 to 2019 commanders 20 Spline Gearbox 20 Spline Diff Current Part Number: 703500985 Previous Part number: 703500924 703500854 705501803 This **WILL NOT** work for 2011-2013 Commanders as they have a different rear differential. This **WILL NOT** work for with Commanders Equipped with a LOCKING REAR DIFFERENTIAL. This **WILL NOT** work for 2020 Commanders
Rugged wheels spacers are made from T6061 aluminum alloy and are precisely CNC machined for accurate dimensions. Spacers can be direct bolt on and can use OEM studs. If you are looking to widen the stance of your machine, clear larger tires or get some new wheels. These spacers are just what you need. These spacers are sold as a pair. 1.5 inch thick The bolt pattern is 4x137mm M10 studs Part number PAWS-1036
NEW OEM Timing Chain Tensioner Kit Sold as a Pair, enough to do one vtwin engine. Fits: 500 570 650 800HO 800R 850 1000 1000R engines. Part numbers 711641150 420641150 420430370 420430373 290250890 420250890 711238120 420238120 420236520 420236521 711236520 711236510 420236510
Can-am OEM PTO and crankcase bearing install and removal tools. These are the OEM tools required to install bearings in the bottom end of your Can-am V twin engine correctly. Part Numbers 529035917 & 529036032
Set of 13 CVT clutch cover bolts with the hex heads and torx inside.
The preferred style to work with.
Genuine OEM Parts
A little anit-seize is a great idea when installing these bolts, as the inserts they screw into easily can strip out.
Part Number 420440568
OEM Canam Projector High Beam projector head light assembly with 9005 bulb. Brand NEW! High quality HELLA brand made in Austria. Fits many models please ask if you are unsure! Part Number 710002525
Rugged wheels spacers are made from T6061 aluminum alloy and are precisely CNC machined for accurate dimensions. Spacers can be direct bolt on and can use OEM studs. If you are looking to widen the stance of your machine, clear larger tires or get some new wheels. These spacers are just what you need. These spacers are sold as a pair. One inch thick The bolt pattern is 4x137mm M10 studs Part number PAWS-1035
New Seizmik Halo R Convex Panoramic Rear View Mirror Seizmik Part Number: 18057 Fits 2.0? Round Tube ROPS (rollover protections system) and 1.875? Round Tube ROPS with shims We mounted this very easily in our Can-am Defender with a m8 bolt and nut in one of the factory holes. Features: Two Ball Joints—Maximizes range of adjustment High Impact ABS Plastic Housing—Resists damage Shatter Resistant Safety Glass—For maximum safety Convex Mirror Surface—Wider viewing range and image stabilization Built Tough—Heavy duty steel clamp with low mass design for maximum strength and durability Impact Resistant ABS Bezel—Protects and secures mirror glass and allows for easy glass replacement Seizmik Design—Styled to compliment all SEIZMIK side view mirrors UNLIMITED LIFETIME WARRANTY
- OUT OF STOCK
NEW OEM BRP Thermostat Current part number 709200406 replaces 709200383 This style is external from the cylinder head. If you are unsure on fitment please contact us. 
Aftermarket Four wheel drive servo motor.
This is what engages the sliding collar putting power to the front differential.
Replaces oem 715900614 4151 29174 420891087
All Balls Fuel pump rebuild kit, with pick up screens and hoses.
Fits most every can-am efi v-twin application. Including the hard to find bottom feed early G1’s
WILL NOT FIT 570 OR Defender HD5
24-72015 47-2015 Replaces OEM numbers: 703500771 709000245 703500766 709000287
- OUT OF STOCK
New Genuine OEM Convex mirror for wide angle visibility Can be used with or without roof and windshields 2013-2018 Maverick 2011-2020 Commander Part number 715000956 Install with in minutes 
Can Am Commander seat bottom cover Solid Black in color Brand new OEM Part Number: 708000674 708001103
NEW SEIZMIK STRIKE Side mirror set
Both drivers and passengers side mirrors
Fits 2.0″ Round Roll Cages or the 1.875″ Round Roll Cages with the supplied rubber shims
Features: Adaptive 360 Bracket Rotation: Will accommodate any angle roll cage pillar & provide optimal viewing position, so you can mount it high or low and adjust to perfect position every time
Full Breakaway Geometry: Designed to break away during impacts to prevent damage
Convex mirrors more than double your field of rear view
High-Impact ABS Plastic Housing: Resists damage
Ball Socket Joint: Provides a broad range of viewing angles
Heavy-Duty Steel Mounting Clamp: Low mass design provides maximum strength and durability
Convex Mirror Surface: provides wider viewing ranger and image stabilization
Shatter Resistant Safety Glass Position Tension Adjustment Bolt: Always be able to keep it tight as newUNLIMITED LIFETIME WARRANTY
CANAM Cage Styles
Defender: Pro Fit Cage
Maverick Trail/Sport: Pro Fit Cage
OG Maverick/Commander: Round 2.0”Part number 18092
Brand NEW OEM Tail Light Assembly Found in G2 Renegade and Outlander, Commander and Maverick. Fits left or right. Part Number 710001645
Heavy-duty ball joint kits feature durable steel-on-steel design and an adjustable end cap, which allows slop to be taken up as they wear
Greased zerk fitting for easy grease delivery
Replaces OEM part numbers: 706202044 706200741 706201370 706201394
G2 ATV’s Commander, Maverick. Unsure on fitment? Please ask!
Moose Racing number 0430-1036
Heavy-duty ball joint kits feature durable steel-on-steel design and an adjustable end cap, which allows slop to be taken up as they wear
Greased zerk fitting for easy grease delivery
Replaces OEM part numbers: 706201393 706201576 706202045
G2 ATV’s Commander, Maverick, Maverick X3, Maverick Sport, Maverick trail
Unsure on fitment, please ask!Moose Racing number 0430-1035
NEW OEM ignition switch. Part number 710008400 replaces 710002327 710003847 It will work on all 2011 to 2019 Commanders, 2012 to 2016 Generation 2 Outlanders and Renegades and 2013 to 2018 Mavericks. Key sold separately.
Brand New Genuine OEM XPS Full Synthetic Oil Change Kit. Ultra convenient “all in one” kit saves time and money. For Can-am off road vehicles with 500cc or larger Rotax engines. Excludes Traxter and Quest. Not compatible with Maverick X3 Includes 2 quarts plus 1 16 fl oz of 4T synthetic oil 0W40, 0-rings, rotax oil filter, and copper washer for old style and new style drain plugs. May not ship in original box Part Number: 779259
Brand New Genuine OEM XPS Full Synthetic Oil Change Kit.
Ultra convenient “all in one” kit saves time and money.
For Can-am off road vehicles with 500cc or larger Rotax engines. Excludes Traxter and Quest.
Not compatible with Maverick X3
Includes 2 quarts plus 1 16 fl oz of 4T synthetic oil 10W50, 0-rings, rotax oil filter, and copper washer for both old style and new style drain plugs.
10w50 oil, great for hot climates, temperature range -13*F to 122*F
May not ship in original box
Part Number: 9779252 779252
Used OEM Steering wheel support and steering shaft Good condition, a slight chip on the steering shaft plastic insert, shouldn't affect operation Comes as pictured Part Number: 709401167 and 709401391- OUT OF STOCK
NEW OEM 450 and 570 Outlander keyed ignition switch, and matched keys Two position switch, non DESS Style. This is just on and off. No headlight control. Used on 2017 and newer G2L ATV’s Comes with main key and back up key These are not the electronic black keys, these are cut keys to match the ignition switch Part Number 710007864 replaces 710005153
UNI Foam air filter You will need to oil this filter before use. Fits SXS pictured: Commanders 800/1000 and Maverick 1000R (non turbo) (non X3/Sport/Trail) Unsurpassed in airflow, stopping dirt and overall performance Two-stage air filters come apart for maximum airflow and ultimate cleaning Most filters feature the Ultra Seal grease groove on the sealing surface Each fits in stock air box exactly like OEM filter Clean easily with grease-cutting dish washing detergent; just clean, oil and reuse indefinitely Flexible seams that will not crack Filters are designed to fit all stock air boxes Made in the U.S.A. Replaces OEM 707800327
Brand New Genuine OEM XPS Full Synthetic Oil Change Kit.
Ultra convenient “all in one” kit saves time and money.
For Can-am off road vehicles with 500cc or larger Rotax engines. Excludes Traxter and Quest.
Not compatible with Maverick X3
Includes 2 quarts plus 1 16 fl oz of 4T synthetic oil 5W40, 0-rings, rotax oil filter, and copper washer for old style and new style drain plugs.
May not ship in original box
Part Number: 779258 replaced by 9779488
- OUT OF STOCK
Brand New Genuine OEM Shifting cable for two passenger Canam Mavericks and Commanders WILL NOT FIT Maverick Trail/Sport or X3 WILL NOT FIT Four Seat Models Comes as pictured OEM part number 707000775
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.