- OUT OF STOCKNEW OEM BRP Thermostat Current part number 709200406 replaces 709200383 This style is external from the cylinder head. If you are unsure on fitment please contact us.
- NEW OEM Winch Switch 710002052 New Genuine OEM Can-Am 4 Wheel Drive Switch This operates the winch on your SXS This is a two position momentary rocker switch. Fits: Commander, Maverick and Maverick Turbo, Maverick X3, Maverick Sport, Defender If you aren’t sure if this will fit, please ask, we will help! Part number 710002052
- New Genuine OEM Can-Am 4 Wheel Drive Switch This selects the two wheel drive or four wheel drive on your SXS This is a two position rocker switch. Fits Commander, Maverick and Maverick Turbo Will not fit Maverick X3/Sport/Trail If you aren’t sure if this will fit, please ask, we will help! Part number 710001737
New OEM Can Am Outlander, Renegade, Maverick or Commander Gear Box
Current Part Number- 420686650
Previous Part Numbers – 420684783, 420684786, 420684784, 420248529, 420620925, 420685805, 421000698NEW OEM Canam Part NOT A REBUILD, ALL NEW Brand New In The Box
Fits- Maverick 1000R, Commander 1000 or 800, Outlander 1000 2012-2014, all Outlander XMR 1000, Renegade 1000.Standard ratio, low ratio also available. If unsure of fitment, please contact us. We will be happy to help!
If you are using a QRS secondary clutch (turbo applications) transfer your distance ring from your previous gearbox.
Ring and Pinon Gears 37/15=2.467
Intermediate 45/44=1.023
High Range 36/27=1.333
Low Range 44/19=2.316
Reverse 34/12=2.833
High Range Ratio 3.364
Low Range Ratio 5.842
Reverse Ratio 7.148- New OEM Differential Pinion Seal. Please check your wear ring, if that is grooved it is time to replace. Very easy to miss that and blame a new seal on a bad wear ring. Will fit: Gen 1 Front and Rear Diffs Gen 2 Outlander and Renegade Front and Rear Early Commander Rear All Maverick and Commander Front WILL NOT FIT G2 XMR 800/850/1000 REAR DIFFERENTIAL Measurements are shown: 70mm outside and 37mm inside Part number 705401481
- SHIPS FREE TO THE LOWER 48 STATES New OEM Standard G2 Rear Differential Ring & Pinion Gear Set 1652 There are a few options for kits, please verify your differential uses this style of gears before ordering! This will only fit six mounting hole differentials. OEM Rear Differential Gear set 10/36 Ring and Pinion gear set. The gears are straight cut as pictured. Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement. Measure your outer diameter of your axle seals! They should measure close to 2 1/16? (52mm) To further verify fitment you can measure your pinion pilot shaft, this should be 5/8? (16mm) Please take the time to measure your parts before buying this will save time and restocking fees. Fits 2015 -2019 G2 style ATV 500/570/650/800/850/1000/1000R NON-XMR style REAR differential. 570/650 XMR machines do not have the true XMR differential.
- 1652 G2 Standard Rear Differential Rebuild Kit Please note, application alone is not accurate enough, please measure your parts before ordering! There are a few options for rebuild kits, please measure your parts before ordering!! OEM Rear Differential Gear set 10/36 Ring and Pinion gear set. The gears are straight cut as pictured. Paired with high quality aftermarket ball bearings along with double lip axle seals. If your differential has tapered roller bearings, this will not fit. This kit should be installed by an experienced technician. Shims are included as the gears will need to be set up in your cases. Note: the O rings are not included, this is a cost savings measure as they are generally reusable. This kit will only fit six mounting hole differentials. Measure your outer diameter of the pinion seal, it should measure 2 3/4" (70mm) Measure your outer diameter of your axle seals! They should measure close to 2 1/16″ (52mm) To further verify fitment you can measure your pinion pilot shaft, this should be 5/8″ (16mm) Please take the time to measure your parts before buying this will save time and restocking fees. Fits 2015 and newer G2 style ATV 500/570/650/800/850/1000/1000R NON-XMR style REAR differential. 570/650 XMR machines do not have the true XMR differential.
- OUT OF STOCKNew OEM Differential Pinion Oil Seal. Please check your wear ring, if that is grooved it is time to replace. Very easy to miss that and blame a new seal on a bad wear ring. Will fit: Gen 1 Front and Rear Diffs 2012-18 Outlander and Renegade Front and Rear Early Commander Rear All Maverick and Commander Front WILL NOT FIT G2 XMR 800/850/1000 REAR DIFFERENTIAL or 2019 and newer Measurements: 70mm outside diameter and 37mm inside diameter Part number 705401615
- OUT OF STOCKNEW OEM Shock Bushing for base black body hydraulic type shocks. These will fit: 2020 and prior Commanders 800 800R 1000 1000R G1/G2 Outlanders 400 450 500 570 650 800HO 800R 850 1000 1000R Oem part number 715900122
- NEW GENUINE OEM part Part number 705600678 Includes: 715500333 715500383 705600080 715500336 715500337 This is the passenger side front caliper right hand side Fits two seat models: 2011 Commander 800 2012-2020 Commander 800R 2011-2017 Commander 1000 2013-2015 Maverick 1000R STD XRS XXC 2016-2018 Maverick 1000R STD DPS XC XXC WILL NOT FIT TURBO, XMR, OR MAX MODELS
- New 2014-2019 can am commander 800 or 1000 rear driveshaft. This will not fit 2011-2013 Commanders. We install the protector to make it a straight forward install for you! This is the new style yoke that does not require a wear ring. This is an OEM CanAm shaft, do not confuse this with sub grade Chinese products. This has the larger yoke end for the 2014 to 2019 commanders 20 Spline Gearbox 20 Spline Diff Current Part Number: 703500985 Previous Part number: 703500924 703500854 705501803 This **WILL NOT** work for 2011-2013 Commanders as they have a different rear differential. This **WILL NOT** work for with Commanders Equipped with a LOCKING REAR DIFFERENTIAL. This **WILL NOT** work for 2020 Commanders
New OEM Canam Commander 800 or 1000 rear driveshaft. We install the wear sleeve and protector to make it a straight forward install for you! This is an OEM can am shaft, do not confuse this with sub grade Chinese products. If you have a 2011-13 commander 800 or 1000, please understand the 2014-new commander rear propshaft will not fit! They have a different rear differential. We here at CPG understand the newer shafts are much cheaper, we do not know why there is such a price difference. *Will not fit Commanders with Electric Unlocking rear differentials (this is a rare option, you will have a switch on the dash) 20 spline gearbox end yoke 18 spline differential end yoke Roughly 6 1/4? center of weld to center of weld. Current Part Number: 703500805 Previous Part number: 703500762 705501257
Brand New Genuine OEM front differential This is the power steering model which has the quick engagement
Will work on both power steering and non power steering machines
Fits 2012- Current Outlanders and Renegades (minus electronic locking type front differentials)
Also Fits 2011-2020 Commander Commander MAX and 2013-2017 Maverick and Maverick MaxOld part numbers 703500900, 705401241, 705401480, 705401483, 705401485, 705401488, 705401511, and 705402181
Current part number 703500908You will need to transfer over your fill plug