Right Side (Passenger) Front One Caliper Set Part number: DP411 Replaces OEM # 715500336 Please contact us to confirm fitment if you are unsure. DP Brakes Brake Pads are designed with sintered metal compounds to give your SXS high-tech performance in all conditions Pads have a quick break-in period so you get maximum performance fast DP Brakes design and materials ensure consistent, hard stops and fade-free performance Sintered metal compounds outlast more conventional organic or aramid fiber pads
Left Side (Drivers) Front One Caliper Set Part number: DP412 Replaces OEM # 715500335 Please contact us to confirm fitment if you are unsure. DP Brakes Brake Pads are designed with sintered metal compounds to give your SXS high-tech performance in all conditions Pads have a quick break-in period so you get maximum performance fast DP Brakes design and materials ensure consistent, hard stops and fade-free performance Sintered metal compounds outlast more conventional organic or aramid fiber pads
Right Side (Passenger) Front One Caliper Set Part number: DP544 Replaces OEM # 705601150 Please contact us to confirm fitment if you are unsure. DP Brakes Brake Pads are designed with sintered metal compounds to give your SXS high-tech performance in all conditions Pads have a quick break-in period so you get maximum performance fast DP Brakes design and materials ensure consistent, hard stops and fade-free performance Sintered metal compounds outlast more conventional organic or aramid fiber pads
Left Side (Driver) Front One Caliper Set Part number: DP545 Replaces OEM # 705601149 Please contact us to confirm fitment if you are unsure. DP Brakes Brake Pads are designed with sintered metal compounds to give your SXS high-tech performance in all conditions Pads have a quick break-in period so you get maximum performance fast DP Brakes design and materials ensure consistent, hard stops and fade-free performance Sintered metal compounds outlast more conventional organic or aramid fiber pads
Front and Rear Seals for the engine thru shaft. These are high quality Timken brand seals Replaces OEM part numbers: 420430589, 420430580, 420850055
EPI Bushing Kit, steel inner, plastic outer bushings and shims Set of 4 Fits: Can Am ATV’s Outlander or Renegade and Commander If you are unsure on fitment, please contact us before purchasing! Exact replacement components to return your suspension to like-new condition Kits are sold per A-arm EPI Part Number: WE341043 P/U Part Number: 0430-0707 Replaces OEM Part Numbers: 706200051 706200181 706200157 Ships as Pictured
EPI Bushing Kit, steel inner, plastic outer bushings and shimsFits: G2 Canam ATV’s Outlander or RenegadeDefender and CommanderIf you are unsure on fitment, please contact us before purchasing!Exact replacement components to return your suspension to like-new conditionKits are sold per A-armEPI Part Number: WE341052P/U Part Number: 0430-1029Replaces OEM Part Numbers: 703500875 706202088 706202089 706202133
Excellent quality replacement part Meets or exceeds OEM quality 2 required per vehicle Replaces oem number 709401134 EPI number WE315041 Fits : 800 Commander Std/DPS/XT 2013-19 800 Commander Max DPS 2017-19 1000 Commander Max Std/DPS/Ltd/XT 2014-19 1000 Commander Std/DPS/Ltd/XT/XT-P 2013-19 Commander E Std/XT/LSV/LSV SE (Electric) 2014-15- OUT OF STOCK
EPI Primary Clutch Slider Buttons WE210931
Replace your worn slider buttons with these from The Clutch Guys. Worn slider buttons cause noise, poor shift reaction and potentially damage to your primary clutch. Buttons that are allowed to wear too far will eventually fall out of place causing major damage to the clutch. If your clutch has a lot of miles on it be sure to inspect your rollers also.
The kit includes 12 replacement slider buttons
Replaces OEM part numbers: 420281290 420281291 420281293 420281296 711281290
Used Good Condition OEM Front Facia Support/ Headlight Support Fits 2011-2020 Commanders Product Number: 705002891 Comes as Pictured
All Balls Fuel pump rebuild kit, with pick up screens and hoses.
Fits most every can-am efi v-twin application. Including the hard to find bottom feed early G1’s
WILL NOT FIT 570 OR Defender HD5
24-72015 47-2015 Replaces OEM numbers: 703500771 709000245 703500766 709000287
NEW aftermarket cooling fan for G1 ATV’s Bolt on plug in and go, this is a nice alternative to the OEM Replaces OEM 709200124 709200371 709200313 709200229
Left Side Front or Rear Center for G1 ATV One Caliper Set DP Brakes Brake Pads are designed with sintered metal compounds to give your ATV high-tech performance in all conditions Pads have a quick break-in period so you get maximum performance fast DP Brakes design and materials ensure consistent, hard stops and fade-free performance Sintered metal compounds outlast more conventional organic or aramid fiber pads DP-920 Replaces oem 705600014 705600398
SHIPS FREE TO THE LOWER 48 STATES Fits all 500, 650, 800, 800R, 570, 850, 1000, 1000R and 1000R turbo Mavericks Outlanders, Renegades, and 2020 & Prior Commanders. Replaces OEM part numbers 715000302, 422280360, 715900212, and 422280364. This will not fit: Defenders, Maverick X3 or Maverick Sport/Trail Gates Part number 30R3750 Do not confuse this with the carbon or standard g-force, this is the newly developed for the 2020 season.DON’T BREAK YOUR BELT. BREAK IT IN.FEATURES AND BENEFITS Designed for the most demanding, turbo-charged off-road CVT applications. With Gates proprietary materials and design, G-Force™ RedLine™ CVT belts handle extreme temperatures with excellent heat recovery, while maximizing load and torque capacity ― making it one of the most efficient CVT belts currently on the market.- First on the market to utilize Ethylene Elastomer compound to address the needs of larger SxS and high-horsepower ORVs in tough riding conditions.
- Next-generation EE compound offers maximum transverse stiffness and heat resistance, resulting in higher load capacity, higher peak torque capacity, less “heat fade” and less speed loss.
- Delivers 75% greater dynamic axial stiffness on average, up to 50% lower speed losses and better recovery from temperatures up to +170°C (+338°F) without power loss.
- Unmatched Temperature Capability – Runs cooler, resists glazing for better recovery and reduced cracking/chunking out after running at temps exceeding +149°C (+300°F).
- Extended Belt Life – Belt life increased 100-300% versus aftermarket competitive belts in severe duty lab test conditions and in field testing.
- Higher Power Capacity – Reduced speed (rpm) loss by 50% under high loads and increased load capacity by >10% compared to other aftermarket belt.
If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersports belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all. Follow these steps to ensure the best performance and longest life from your G-Force™ belt.
1. Clean the clutches according to manufacturer specifications and clean the sheaves with a Scotch-Brite™ pad. Remove old belt residue, glazing, oils, and debris with alcohol or acetone on the clutch sheave area. Be sure your breather tubes are free of any belt material (broken belt material gets everywhere)
2. Install and Break It In. Perform two heat cycles (10-15 minutes each) at +27°C (+80°F) at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. If belt installation is at a temperature of +16°C (+60°F) or below, perform two heat cycles in 20 minutes at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.
Brand New Genuine OEM Grey Electronic Key. The key will need to be programmed with BUDS software to your ATV or UTV to work. Feel free to contact us about programming These keys can be programmed as performance, normal, or a work key You can program multiple keys to your ATV or UTV Part number 710002183
HD Clutch bolt set for most every Can-am V-twin 2006 to current. Will not work on: Maverick Turbo Maverick X3 Maverick Sport Maverick Trail Defender These will swap out the factory Torque To Yield (TTY) bolts/studs. M10 and M12 Black-Oxide Alloy Steel Socket Head Bolt These are class 12.9 bolts, with a tensile strength of 170,000 psi, these alloy steel bolts are stronger than Grade 8 steel bolts. 8 and 10mm Allen Sockets required to install these bolts. 18-8 Stainless Steel Single-Wave Washers included, these help prevent loosening, use with your existing washers. Installation Torque Specs: 80 ft·lb On the Primary Bolt 45 ft·lb On the Secondary Bolt (red thread locker recommended, allow to set up overnight)
New Genuine OEM Intake neck for Outlander 1000, Renegade 1000, Commander 1000 and Maverick 1000 Turbo Old part number 420267040 420267041 Current part number 420267042
Please verify your differential uses this style of seals before ordering! Can Am Rear Differential Pinion and Axle Seals (Timken or SKF) Fit on most 2006-2013 Outlanders and Renegades The Pinion Seal has a 70mm Outer Diameter And the standard 37mm inner diameter. The Axle Seal has a 47mm Outer Diameter And the standard 30mm inner diameter. Complete Seal kit for Standard Rear differentials Replaces OEM Numbers: 705400027 705500751 705501996 705401481
Please verify your differential uses this style of Seals before ordering! Can Am Standard Rear Differential Pinion and Axle Seals (Timken or SKF) Please measure your parts before ordering to verify fitment. The Pinion Seal has a 70mm Outer Diameter and the standard 37mm inner diameter. Replaces part number 705401481 The Axle Seal has a 52mm Outer Diameter And the standard 30mm inner diameter. Complete Seal kit for Standard Rear differentials common to find in 2016 and newer ATVs or if your differential has been repalced.
NEW Black Conical Taper M10 Lug Nut Set of 16 M10x1.25 thread size 60 Degree taper 14mm Hex head size, great for use with aftermarket wheels where socket space is a concern These will work on every Canam ATV since 2006 and most every Canam sxs Will not fit the Maverick X3 12mm wheel studs. Part numbers: 57-94121B, ALUGB14BX
NEW Chrome Conical Taper M10 Lug Nut Set of 16 M10x1.25 thread size 60 Degree taper 14mm Hex head size, great for use with aftermarket wheels where socket space is a concern These will work on every Canam ATV since 2006 and most every Canam sxs Will not fit the Maverick X3 12mm wheel studs. Part numbers: 57-94121, ALUG14BX
One CVT cover screw with the Torx head. M6 X 30.5 Stainless Part # 420440561
New OEM Maverick 1000R Primary Clutch Stud Kit
Also fits 1000R ATV’s
Will not fit Turbo Mavericks or Maverick X3/Sport/Trail
Complete brand new OEM kit
Part number 703500842
OEM Number 715900244 Maverick 1000R Commander 1000R Will not fit turbo or ATV applications Center Electrode Projection Projected Center Electrode Type Standard Electrical Resistance 5k Ohms Electrode Tip Material Nickel Alloy Ground Electrode Configuration Single Ground Electrode Shape Standard Heat Range 8 Hex Size Imperial 9/16″ Hex Size Metric 14 mm Spark Gap Imperial 0.035″ Spark Gap Metric 0.9 mm Style LMAR8C-9 Terminal Configuration Solid Terminal Thread Reach Imperial 1-1/32″ Thread Reach Metric 26,5 mm Type Resistor Type Units Each, order two per engine
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.