2020 & Prior Commander

  • SHIPS FREE TO THE LOWER 48 SATES Can-am 13 bolt ATV CVT cover set. This will fit on any 2006-current v twin ATV, Renegade or Outlander, 500 650 800 or 1000. This cover will not clear primary clutches with studs (1000R applications) This is the kit many swap to, this kit will keep the water out! We recommend a light coat of thread lubricant on the cover screws, keeps the inserts from spinning. Comes with: XMR Clutch covers inner and outer. Center Rubber Gasket Drain plug with clamp PTO O-ring Hardware to attach inner cover to gearbox/engine Gear box O-ring 13 Cover screws (hex head style) Part Numbers: 420611397 420611390 420611391 420611393 420611407 420440568

  • SHIPS FREE TO THE LOWER 48 STATES OEM Can am Shaft cut to length for use with our maverick swap kit in your commander.
  • Can Am Commander 800 1000 Dual CVT Air Intake 2011 2012 2013 2014 2015. Complete kit to upgrade CVT cover from 1 inlet - 1 outlet to 2 inlets - 2 outlets. Keeps CVT system cooler in extreme use conditions. Reduction in belts temps range from 40 to 70 degrees! Used in conjunction with Snorkel Kit to get maximum airflow to CVT while under extreme conditions. Needed to install Snorkel Kit (715001728) on Commander.  Part Number: 715002467.
  • LinQ Stackable Fuel Caddy with brackets to mount on G2 ATV’s and SXS with the LinQ system

    WILL NOT FIT G2L or G1 ATV LinQ mounting holes need to be 16″ on center

    14.5-liter (3.8 US gallons) capacity

    Very solid mounting system for carrying extra fuel

    No tools need to install, mounting blocks twist into place and lock in solid.

    This caddy has a rubber strap to secure the lock 100%

    Part numbers: 715004960 295100752

  • New Can Am Outlander Renegade and Commander V-Twin EFI Speedo Speedometer Display Dash 2018-2020 Please understand 2017 and older models require a different dash, even if yours looks the same. This is the factory Gauge/Screen. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. Contact for more information. It will display 0 miles, please record your current miles for your records. Current Part number: 710005553
  • New Can Am Maverick Renegade and Commander V-Twin EFI Speedo Speedometer Display Dash 2007-2013 Please understand 2014 and newer models require a different dash, even if yours looks the same. This is the factory Gauge/Screen. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. Contact for more information. It will display 0 miles, please record your current miles for your records. Current Part number: 710003288 Previous part numbers:  710001024 710001351 710001526 710001987 710002294 710002535
  • Brand new outer secondary clutch

    This is found on many BRP ATVs. Please ask if you have fitment questions.

    New OEM Part Part Numbers : 420280173 420280176 420280178

  • Brand New Genuine OEM Radiator

    Fits 2011-2020 Commander and 2013-2018 Maverick (non X3/Sport/Trail)

    Current Part Number 709200395 Replaces Part Number 709200252

  • SHIPS FREE TO THE LOWER 48 STATES New OEM Standard G2 Rear Differential Ring & Pinion Gear Set 1652 There are a few options for kits, please verify your differential uses this style of gears before ordering! This will only fit six mounting hole differentials. OEM Rear Differential Gear set 10/36 Ring and Pinion gear set. The gears are straight cut as pictured. Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement. Measure your outer diameter of your axle seals! They should measure close to 2 1/16? (52mm) To further verify fitment you can measure your pinion pilot shaft, this should be 5/8? (16mm) Please take the time to measure your parts before buying this will save time and restocking fees. Fits 2015 -2019  G2 style ATV 500/570/650/800/850/1000/1000R NON-XMR style REAR differential. 570/650 XMR machines do not have the true XMR differential.
  • Seat Bottom Fits Commanders, and Mavericks. 800 or 1000 Will not work on Maverick X3/Sport/Trail Current part number 703500943 Replaces part numbers: 708001085 708001102 708001318
  • SHIPS FREE TO THE LOWER 48 STATES Seat Bottom Fits Commanders, and Mavericks. 800 or 1000 Will not work on Maverick X3/Sport/Trail Part number 703500945 Replaces 708001316
  • Canam  Outer CVT Cover Commander/Maverick 1000R Please look at pictures to verify fitment. This has two breather holes, one in front of the primary, one on the secondary. This cover is the factory replacement for 420612319, some aftermarket clutches will not clear the new breather hole style you may need to modify this cover or backdate it to the 420612313 style with out the secondary breather. Fits: Commander 1000R two seat 2018-2020 Commander 1000R MAX four seat 2018 Maverick 1000R two seat 2014-2018 Maverick 1000R MAX four seat  2014-2018 Will not fit: 2015-2018 Maverick 1000R Turbo 2017-2018 Maverick 1000R XMR If you have questions please ask! Current Part number 420212286 replaces 420612319 420612470