Used- Good Condition OEM Protector Ring for 2011-2020 Commander Standard Shocks Measurements: Inner 50mm Outer 85mm Product Number: 706000911 Comes as Pictured
New Genuine OEM part Will work on 2014 or 2015 Commanders or Mavericks Part Number: 709401296 Will come as pictured
Used- Good Condition Lower Firewall grill fits: Maverick & Commander 2013-2016 Product Number: 707900180
New Seizmik Halo R Convex Panoramic Rear View Mirror Seizmik Part Number: 18057 Fits 2.0? Round Tube ROPS (rollover protections system) and 1.875? Round Tube ROPS with shims We mounted this very easily in our Can-am Defender with a m8 bolt and nut in one of the factory holes. Features: Two Ball Joints—Maximizes range of adjustment High Impact ABS Plastic Housing—Resists damage Shatter Resistant Safety Glass—For maximum safety Convex Mirror Surface—Wider viewing range and image stabilization Built Tough—Heavy duty steel clamp with low mass design for maximum strength and durability Impact Resistant ABS Bezel—Protects and secures mirror glass and allows for easy glass replacement Seizmik Design—Styled to compliment all SEIZMIK side view mirrors UNLIMITED LIFETIME WARRANTY
- OUT OF STOCK
Brand New Moose Utility Division left front CV axle Will fit CAN AM Commander 800R and 1000 2011-2014. Low profile stainless steel clamps Moose Utility Part Number: 0214-0989 O/E part number: 705401105 
Brand new generator stator Direct replacement to your original unit Plug-and-play, direct fit, easy installation. Highest grade lamination materials Highest grade copper windings, resistant to 200 degrees Celsius. Connector included Rubber grommet included Replaces OEM numbers: 420685632 420685631 420685630 This stator is used on many Can-Am Maverick, Commander, Outlander, and Renegade models. If you are unsure of fitment please reach out, we are here to help! Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced. This stator plugs directly into the voltage regulator unlike 2010-2011 ATV models this will correct the burnt connection issue the early DPS machines experienced. Dimensions : Interior diameter : 42 mm Exterior diameter : 115 mm Thickness : 24 mm Length of wires stator to grommet : 150 mm Length of wires grommet to plug : 1470 mm Other specifications : Number of wires : 3 Number of plugs : 1 Number of pins : 3 Number of poles : 18 Wire to wire resistance : Alternator : Yellow to Yellow = 0.4 ohms +/-20%
300M Demon Xtreme Heavy Duty Race Spec Ball Joint This fits Lower arms, on many applications. If you have fitment questions please contact us! 2012-2025 G2/G2L/G3/G3L Outlander 500/570/650/700/800R/850/1000/1000R 2012-2025 G2 Renegade 500/570/650/800R/850/1000/1000R 2013-2018 Maverick 1000R/1000R Turbo 2017-2025 Maverick X3 Turbo/Turbo R/Turbo RR/non turbo 2019-2025 Maverick Sport 1000R 2018- 2025 Maverick Trail 800/1000 2016-2025 Defender HD5 HD7 HD8 HD9 HD10 2011-2025 Commander 700/800R/1000 2024-2025 Maverick R (please note this is installed in the upper, and may affect tire clearance) Demon Part number PABJ-5006XHD Replaces OE part numbers 706201393 706201576 and 706202045 This design eliminates the snap ring, opting for a threaded chromoly body for secure ball joint retention. Constructed from 300M stud and dual heat-treated 4340 chromoly steel body and finished with zinc plating. This ball joint is adjustable, rebuildable, and greaseable, maintaining smooth operation for years to come. Warranty for Xtreme Heavy Duty Ball Joint Race Spec Demon Powersports warrants its Demon Xtreme Heavy Duty Ball Joints to the original purchaser for a lifetime period from the date of purchase against manufacturing defects in workmanship and material only. Demon Powersports’ warranty does not apply to failures resulting from misuse, negligence, accidents, improper application, improper installation, alteration, or lack of reasonable or proper maintenance, or if the machine is used in racing or commercial applications. This warranty does not cover normal wear and tear items such as gaskets, seals, boots, bearings, bushings, and rotors. Demon Powersports does not cover the cost of removal and reinstallation of any kind.- OUT OF STOCK
Brand New OEM Water Pump Housing Gasket Will fit many Can-Am models. Part Number 420651190 - OUT OF STOCK
Ravek UTV Universal Sunglasses Holder. It’s mountable on ANY flat surface or 1.25”-2” roll bars with an ultra-durable semi-rigid, EVA molded structure. RAVEK’s magnetic closure means you won’t fight clogged zippers and can access your shades with a single hand. Install in 2 minutes to dozens of locations using fastening straps or 3M heavy-duty adhesive. Technical Specifications 7 3/8" Long, 3 3/8" Wide, 2 7/8" High Designed to Work With Standard And Safety Glasses Compatible With Up To 2" Roll Bar Adhesion Pad Included For Surface Mounting Magnetic Closure Easy To Clean Waterproof Design And Materials Keeps Out Dust And Particles Designed For One Hand Operation 
New OEM Variator Cover for G3 ATV. 420212735
New OEM Variator Cover for 2025 G3 420212701
NEW Wiring Harness Plug. New short wiring harness for rear tail lights Will need to be wired in to work. This plugs in to Tail light part number 710001645
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.