2020 & Prior Commander

OEM Wheel Bearing
$49.99
OEM Can Am wheel bearing. Double row ball bearing.
Fits G1 and G2 Outlander and Renegade.
Fits Commander and Maverick.
WILL NOT work with the Maverick X3 .
Current Part number 293350150
Replaces: 293350118 705400088 and 293350040
Unsure on fitment?
Here are the dimensions:
30mm Inner Diameter
60mm Outer Diameter
37mm Wide
Will come as pictured
Add to cart Details
OEM Timing Chain Tensioner Kit All Vtwin
$95.00
NEW OEM Timing Chain Tensioner Kit Sold as a Pair, enough to do one vtwin engine. Fits: 500 570 650 800HO 800R 850 1000 1000R engines. Part numbers 711641150 420641150 420430370 420430373 290250890 420250890 711238120 420238120 420236520 420236521 711236520 711236510 420236510
Add to cart Details
OEM Shift Cable Support for 2011-2020 Commander 707000921
$9.99
Used- Good Condition, slight blemishes OEM Shift Cable Support Part Number: 707000921 Fits 2011-2020 Commander Comes as Pictured
Add to cart Details
OEM Rubber Bellows With Clamp 705400352
$13.75
Cam Am rubber bellows for front differential or rear differential This is a brand new OEM rubber breather and a OEM Oetiker Clamp Bellows Part # 705400352
Add to cart Details
OEM Intake Manifold Support 2011-2020 Commander 2013-2018 Maverick 420651521
$29.99
Used- Good Condition, some slight surface rust OEM Intake Manifold Support Part Number: 420651521 Fits 2011-2020 Commander and 2013-2018 Maverick Comes as Pictured
Add to cart Details
OEM Hex Head CVT Clutch Cover Bolt M6 x 30.5 420440568
$8.09
Single CVT cover bolt with the hex head and torx inside. The preferred style to work with. Part number 420440568 replaces 420440567 420440307 Genuine OEM Part A little anti-seize is a great idea when installing these bolts, as the inserts they screw into can easily strip out.
Add to cart Details
OEM Head Rest 2013-2018 Maverick 2014-2020 Commander 708001074
$59.99
Used- Like New Condition OEM Head Rest Product Number: 708001074 Fits 2013-2018 Maverick, and 2014-2020 Commander Comes as Pictured
Add to cart Details
OEM Head Gasket 400 800 1000 Engines 420630195
$63.99
OEM Can-Am Head Gasket part # 420630195 Fits 400, 800, 1000 engines. Will support up to 91mm bore (first over bore) This is for ONE (1) Gasket. Most applications will need 2 (V-twin) if doing full rebuild.
Add to cart Details
OEM Digital Key 2006-2017 710000817
$39.99
Brand New Genuine OEM Black Electronic Key for ATV and SXS machines The key will need to be programmed with BUDS software to your ATV or UTV to work. Feel free to contact us about programming This key can be programmed as performance, normal, or a work key You can program multiple keys to your ATV or UTV Part number 710000817
Add to cart Details
OEM Can-am Drive shaft Bolt set with washers M12 x 16 and M10 x 16
$20.00
NEW OEM Can-am rear driveshaft retaining bolts. Don’t know your size? These are the two most common sizes. M12 x 16 and M10 x 16 with washers. Ships exactly as pictured. On the M12x16 bolt we recommend adding thread locking compound before installation. Thread pitch is 1.25
Add to cart Details
OEM Can Am Commander Maverick Brake Pedal Lever 705600724 2011-2016 800 1000
$10.00
Used-Good Condition OEM Can-Am Commander and maverick brake pedal in great working order Product Number: 705600724
Will work on all Commanders and Mavericks
Add to cart Details
OEM Black Grab Bar for Commander Maverick 705203332
$25.00
Used- Good Condition OEM Can-Am Grab Handle for Commander & Maverick Product Number: 705203332 Comes as Pictured
Add to cart Details
OEM 52mm Rear Differential Axle Seal Pair (2) Diff XMR
$30.98
OEM Rear Differential Axle Seals (Set of 2)
Fits on most 2013-Current Mavericks, Outlanders and Renegades
52mm Outer Diameter (which is larger than earlier Diffs)
30mm inner diameter.
Comes as a Pair to do both Left and Right sides of the Differential
705501556 Part number
Add to cart Details
O-ring Replaces OEM 705501880 Buna-N 70 Duro (NBR)
$5.50
Oring that replaces 705501880 Buna-N 70 Duro (NBR) This is used on 2014-19 Commander rear differential (without unlocking rear) pinion gears
Add to cart Details
NEW Upper EPI Ball Joint G2
$32.99
Brand NEW EPI Upper Ball Joint
For Gen 2 bikes, Commander and Maverick (non Sport/Trail/X3)
Includes Circlip, Cotter Pin, Hardened Washer, and Nut.
Replaces OEM #: 706202044
Manufacturer Part Number: WE350043
Add to cart Details
NEW Timken Front Engine Through Shaft Seal
$8.99
High quality Timken oil seal. Replace a leaking front output seal on your canam. This is the seal that seals the engine through shaft coming out of the front of your Vtwin engine below the front exhaust header. To be 100% sure on fitment, measure your outer diameter on your seal, it should read 47mm This seal has a 25mm inner diameter 47mm outer diamter and is 7mm thick. Replaces OEM part numbers: 420430588 420430589 420430580
Add to cart Details
NEW TIMKEN Canam Engine Crankshaft PTO Oil Seal Vtwin
$15.00
This model type is a rubber O.D. seal with two sealing lips. The main sealing lip is spring loaded. This is a two-way seal, which means that it can retain lubricant and exclude contaminants simultaneously Canam Vtwin crankshaft main seal. Replaces OEM number 420631933 This seal is pressed into the PTO cover on v-twin's Unsure on fitment? Just measure you seal. 52mm Outer Diameter 34mm Inner Diameter 8mm Thick
Add to cart Details
Sale!

NEW TAKE OFF Yoke 20 Spline Partial Machined Gearbox Side
Original price was: $22.50.Current price is: $15.00.
New take off gearbox side, 20 spline yoke. This fits on large gearboxes output shafts. 20 spline yoke partially machined to accept a protector ring. This is the forward most yoke on the REAR driveshaft. Works with 398 U joints. found on Vtwin rear driveshafts. Part number 715900129 replaces 705501373 and 715900234
Add to cart Details
NEW Standard Front Differential Bearing and Seal Kit
$133.00
SHIPS FREE TO THE LOWER 48 STATES Set of Bearings and Seals to Rebuild Your Front Differential on Your Can-Am Fits Most Can-Am Models from 2007-Current (WILL NOT FIT Maverick X3/Sport/Trail or Defender) This Kit has High Quality Aftermarket Bearings which are: Timken, SKF, NSK, KOYO, Nachi Comes with: 2 - Carrier Bearings- SKF Brand 2 - Axle Bearings- OEM NSK Japan made 2 - Axles Seals- Timken 1 - Inner Pinion Bearing- Nachi Japan made 1 - Large Pinion Bearing- Koyo Japan made 1 - Pinion Seal
Add to cart Details
NEW Standard Differential Pinion Nut Removal Tool
$65.00
Replaces OEM 529 035 649 529035649 Standard Differential Pinion Nut Removal Tool 1/2 wrench drive Will fit: G1 Front and Rear Diffs 2012-18 G2 Outlander and Renegade Front and Rear EXCEPT G2 XMR 800/850/1000 REAR DIFFERENTIAL Early Commander Rear 2011-13 All Maverick (non x3/trail/sport) and Commander Front Will not fit the 2019 and newer rear differentials with the tapered roller bearings
Add to cart Details
NEW Spicer Front U Joint
$46.00
Spicer Brand U joint for front drive shafts
Fits: G1 Renegade and Outlander . Also works on Outlander 400 Rear shafts.
Maverick/Commander front driveshafts
Will not fit: Maverick X3/Sport/Trail or Defender
Includes clips, and grease fitting.
Pro tip: Install grease fitting before pressing in u joint.
Install u joint in a manner where you can still grease the joint in chassis.
Replaces OEM : 715900325 703000023 703000024 703500002 703500135 703500607 703500814
Add to cart Details
New Secondary Clutch Spreader Belt Change Tool
$5.00
M8x1.25×70 Bolt. m8-1.25x70mm Used to open the secondary clutch on many Can-am ATV’s & SXS’s Simple tool, trusted seller. Or just use these specs and head to your hardware store.
Add to cart Details
NEW Rugged 2 Inch Wide Wheel Spacer M10 Studs
$105.00
Rugged wheels spacers are made from T6061 aluminum alloy and are precisely CNC machined for accurate dimensions. Spacers can be direct bolt on and can use OEM studs. If you are looking to widen the stance of your machine, clear larger tires or get some new wheels. These spacers are just what you need. These spacers are sold as a pair. Two inch thick The bolt pattern is 4x137mm M10 studs Part number PAWS-1037
Add to cart Details
NEW Rugged 1.5 Inch Wide Wheel Spacer M10 Studs
$95.00
Rugged wheels spacers are made from T6061 aluminum alloy and are precisely CNC machined for accurate dimensions. Spacers can be direct bolt on and can use OEM studs. If you are looking to widen the stance of your machine, clear larger tires or get some new wheels. These spacers are just what you need. These spacers are sold as a pair. 1.5 inch thick The bolt pattern is 4x137mm M10 studs Part number PAWS-1036
Add to cart Details