Moose Racing Air Filter Part Number 1011-2796 Fits SXS pictured: Commanders 800/1000 and Maverick 1000R (non turbo) (non X3/Sport/Trail) Engineered for maximum air flow, increasing horsepower Maintains premium protection by stopping the finest dust particles Flexible seams that will not crack Filters are designed to fit all stock air boxes Made in the U.S.A. Replaces OEM 707800327
All Balls Fuel pump rebuild kit, with pick up screens and hoses.
Fits most every can-am efi v-twin application. Including the hard to find bottom feed early G1’s
WILL NOT FIT 570 OR Defender HD5
24-72015 47-2015 Replaces OEM numbers: 703500771 709000245 703500766 709000287
New OEM 18 spline yoke with fully machined surface This is the forward most yoke on the rear driveshaft of G1 ATVs Fits years 2006 and newer, 450 and larger machines, if you are unsure on fitment please contact us. Use with 398 type U joints Current Part number 715900101 Replaces 705500371 705501372
NEW OEM Timing Chain Housing O ring Order two per Vtwin engine Part number 420430370 420430373
neapco Brand U joint for front drive shafts These U joints are made in Italy, please do not confuse these with the sub-grade china made u joints. Fits: G1 Renegade and Outlander . Also works on Outlander 400 Rear shafts. Maverick/Commander front driveshafts Will not fit: Maverick X3/Sport/Trail or Defender Includes clips, and grease fitting. Pro tip: Install grease fitting before pressing in u joint. Install u joint in a manner where you can still grease the joint in chassis. Replaces OEM : 715900325 703000023 703000024 703500002 703500135 703500607 703500814
Can-am OEM PTO and crankcase bearing install and removal tools. These are the OEM tools required to install bearings in the bottom end of your Can-am V twin engine correctly. Part Numbers 529035917 & 529036032
Can-Am 703500865 Secondary Clutch Driven Pulley Stud Nut Screw Kit Secondary Stud/Nut Kit M10x136mm You will need to reuse your washer. This kit will work on every Vtwin ATV factory driven (secondary) clutch (pulley) Also fits Commander driven clutch Will work on non QRS Maverick driven clutch If you have fitment questions, please contact us, we are here to help. Part numbers: 703500865 420441900 420242097 420242402
Standard Differential Pinion Seal. Please check your wear ring, if that is grooved it is time to replace. Very easy to miss that and blame a new seal on a bad wear ring. Will fit: G1 Front and Rear Differentials 2012-18 Outlander and Renegade Front and Rear Differentials All Commander Front Differentials 2011-13 Commander Rear Differentials 2013-18 Maverick Front Differentials (non X3/trail/sport) WILL NOT FIT G2 XMR 800/850/1000 REAR DIFFERENTIAL Measurements are shown: 70mm outside and 37mm inside Replaces part numbers 705401481 and 705401615
SHIPS FREE TO THE LOWER 48 STATES Can-am Commander style CVT cover set. This is the 13 bolt cover set, with attached reflective heat foam. Fits: Commander 800R two seat 2011-2020 Commander 800R MAX four seat 2016 Commander 1000 two seat 2011-2017 This kit will keep the water out! Comes with: Commander covers inner and outer. CVT Cover Gasket CVT Drain plug and Clamp Engine O-ring Gear box O-ring Inner CVT Bolts/Nut 13 Cover screws Part numbers: 420612472 715900200 420611407 420440568 420430408 420631088 420430126 420440567 420440568
New Genuine OEM Can-Am 4 Wheel Drive Switch This selects the two wheel drive or four wheel drive on your SXS This is a two position rocker switch. Fits Commander, Maverick and Maverick Turbo Will not fit Maverick X3/Sport/Trail If you aren’t sure if this will fit, please ask, we will help! Part number 710001737
Brand New Genuine OEM XPS Full Synthetic Oil Change Kit.
Ultra convenient “all in one” kit saves time and money.
For Can-am off road vehicles with 500cc or larger Rotax engines. Excludes Traxter and Quest.
Not compatible with Maverick X3
Includes 2 quarts plus 1 16 fl oz of 4T synthetic oil 10W50, 0-rings, rotax oil filter, and copper washer for both old style and new style drain plugs.
10w50 oil, great for hot climates, temperature range -13*F to 122*F
May not ship in original box
Part Number: 9779252 779252
New Genuine OEM handle for your commander cargo box. Will work on the upper tail gate or lower cargo door Part number 708300398
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.