Shop

  • OUT OF STOCK
    SHIPS FREE TO THE LOWER 48 STATES Rear Differential Rebuild Kit for 2013-2018 "OG" Maverick 1000R/Turbo Rear Differentials. Will not fit X3 Trail or Sport Mavericks. You will need to shim this to your cases like any other gear set. Factory BRP: gears, roller bearings, pinion seal, washer and shims. IKO needle bearing, SKF or Timken axle seals, aftermarket driveshaft bolt. Replaces oem 703500840 703500869 703500867 703500868 703500837 705502275 705501556
  • Pulled from a 2016 Outlander 570
    9 miles
    Comes with two keys matched one black key and one gray key
    Will need to be matched with dash, key(s), and power steering if equipped with buds software.
    We offer this service please contact for more information
  • OEM Radiator Relocation Kit. Part number 715004943 This moves your radiator (not included) up on where your front rack is currently. The front rack will be removed leaving you with a clean looking machine. This is a must for tackling extreme mud conditions where you risk clogging your radiator and overheating your engine! This is a factory OEM kit, not an aftermarket kit, instructions are provided on BRP's website. Coolant overflow tank is included, hoses ect.. You will not find a better fit and finish kit on the market. There is drilling and cutting involved. This is all covered in great detail. Roughly 2.5 hour install time This kit fits G3L models check out the pictured fitment chart if you are unsure what you ride.
  • CVtech Trail Bloc Primary Clutch with HD retaining bolt, calibrations are for ATVs not UTVs Solid upgrade over the factory unlocked primary clutch, this is a straight bolt on replacement. Locked sheaves, smaller one-way diameter and more belt grip. This is a great clutch for riders looking for a performance upgrade. This comes preset, some fine tuning may be required to get this 100% Many find these settings to be spot on. We will provide assistance in fine tuning for your riding style. Please allow additional 1-2 day handling time.
  • Set of four Bronco gas shock kit for G2 2012-2018 Outlander 500/570/650/800/800R/850/1000/1000R or Renegade 500/570/800R/850/1000/1000R

    These shocks are the same length on all four corners, you may notice a slight lift, more so on a well used machine.

    *Please note these will not work on the wider 2019+ ATVs.

    Features:
    Bronco gas shocks offer long term consistent performance over stock oil only damped shocks
    10% stiffer springs provide a better ride and higher load capacity
    Works great on the front to better support your snowplow and on the rear when hauling cargo
    Smooth black color blends perfectly on your machine
    Direct bolt-on replacement: pre-installed spring allows for quicker setup

    P/N AU-04340 AU-04440

  • Set of four Moose gas shock kit for G1 Outlander 650/800 or Renegade 500/800 These shocks are the same length on all four corners, you may notice a slight lift, more so on a well used machine. *Please note these will not work in place of struts found on the Outlander 400/500 machines. Features: Moose gas shocks offer long term consistent performance over stock oil only damped shocks 10% stiffer springs provide a better ride and higher load capacity Works great on the front to better support your snowplow and on the rear when hauling cargo Smooth black color blends perfectly on your machine Direct bolt-on replacement: pre-installed spring allows for quicker setup P/N13102146X4
  • Set of four Bronco gas shock kit for G1 Outlander 650/800 or Renegade 500/800

    These shocks are the same length on all four corners, you may notice a slight lift, more so on a well used machine.

    *Please note these will not work in place of struts found on the Outlander 400/500 machines.

    Features:
    Bronco gas shocks offer long term consistent performance over stock oil only damped shocks
    10% stiffer springs provide a better ride and higher load capacity
    Works great on the front to better support your snowplow and on the rear when hauling cargo
    Smooth black color blends perfectly on your machine
    Direct bolt-on replacement: pre-installed spring allows for quicker setup

    P/N AU04414X4

  • NEW OEM G2S Snorkel Kit for 2021+ G2 Renegade with larger display, if you have fitment questions please send us a picture of your speedometer and we will help.

    Part number 715007083

    All hardware is included, instructions are online. We can email them if you have trouble finding them. Please note you will need to trim some parts on your machine, to install this kit. This is outlined in the instructions very clearly. This kit raises the engine intake, CVT intake and CVT exhaust. This is a must for an extreme mud rider.

  • This OEM BRP Secondary Clutch Driven Pulley is compatible with Maverick X3 Turbo RR or Turbo R 2017 and newer models. OEM part number 420686738 Your existing belt will work just fine, although installing a new belt at this time is a great idea! We can direct you if you need help finding the right one for your machine.
  • FREE SHIPPING TO THE LOWER 48 STATES  New take off from a unit with under ten miles Will fit G2 Short wheel base 500 570 650 800R  850 Outlander from 2012-2017 Will NOT fit Outlander Max or Renegade Comes with 707600629 muffler, and  707601446  707600764 head pipes.  
  • Used- Good Condition, completely checked over and tested, works as it should OEM 2015 800, and 1000 Commander Short Wheel Base Electrical Harness This Electrical Harness is the Chassis Only Product Number: 710004332 Comes as Pictured
  • Used- Like New OEM 2014-2015 Maverick 1000, ECM Part Number: 420264800 Updated Part Number: 420264802 Comes as Pictured